Wear resistance evaluation of hard-coatings for sheet blanking die

Ömer Necati Cora, Muammer Koç

Research output: Contribution to journalConference article

2 Citations (Scopus)

Abstract

Stamping of advanced high strength steel (AHSS) sheet blanks lead to elevated level of wear, surface quality issues and consequently production interruptions. In order to address wear-oriented problems in stamping dies several countermeasures have been developed. The aim of current study was set to investigate the wear resistance performance of 8 different hard-coatings applied on a tool steel material AISI D2. Roller-like shaped and coated die samples were subjected to non-reciprocating wear tests against two different AHSS sheet blanks (DP 780, LCE 1000) for 2-4 km long. Wear performances were evaluated by means of specific wear rate, microscopic examination as well as 3-D surface roughness parameters. Results showed slightly higher wear resistance for TiAlN and CrN coated samples. It was also noted that the sheet blank material, and its surface properties affected the wear resistance performance.

Original languageEnglish
Pages (from-to)590-596
Number of pages7
JournalProcedia Manufacturing
Volume15
DOIs
Publication statusPublished - 1 Jan 2018
Event17th International Conference on Metal Forming, METAL FORMING 2018 - Toyohashi, Japan
Duration: 16 Sep 201819 Sep 2018

Fingerprint

Hard coatings
Wear resistance
Wear of materials
Stamping
Steel sheet
High strength steel
Surface properties
Tool steel
Microscopic examination
Surface roughness

Keywords

  • AHSS
  • Coatings
  • Die wear
  • Stamping
  • Surface metrology

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Artificial Intelligence

Cite this

Wear resistance evaluation of hard-coatings for sheet blanking die. / Cora, Ömer Necati; Koç, Muammer.

In: Procedia Manufacturing, Vol. 15, 01.01.2018, p. 590-596.

Research output: Contribution to journalConference article

@article{362c915293c445db80bd6b02d938ef02,
title = "Wear resistance evaluation of hard-coatings for sheet blanking die",
abstract = "Stamping of advanced high strength steel (AHSS) sheet blanks lead to elevated level of wear, surface quality issues and consequently production interruptions. In order to address wear-oriented problems in stamping dies several countermeasures have been developed. The aim of current study was set to investigate the wear resistance performance of 8 different hard-coatings applied on a tool steel material AISI D2. Roller-like shaped and coated die samples were subjected to non-reciprocating wear tests against two different AHSS sheet blanks (DP 780, LCE 1000) for 2-4 km long. Wear performances were evaluated by means of specific wear rate, microscopic examination as well as 3-D surface roughness parameters. Results showed slightly higher wear resistance for TiAlN and CrN coated samples. It was also noted that the sheet blank material, and its surface properties affected the wear resistance performance.",
keywords = "AHSS, Coatings, Die wear, Stamping, Surface metrology",
author = "Cora, {{\"O}mer Necati} and Muammer Ko{\cc}",
year = "2018",
month = "1",
day = "1",
doi = "10.1016/j.promfg.2018.07.282",
language = "English",
volume = "15",
pages = "590--596",
journal = "Procedia Manufacturing",
issn = "2351-9789",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Wear resistance evaluation of hard-coatings for sheet blanking die

AU - Cora, Ömer Necati

AU - Koç, Muammer

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Stamping of advanced high strength steel (AHSS) sheet blanks lead to elevated level of wear, surface quality issues and consequently production interruptions. In order to address wear-oriented problems in stamping dies several countermeasures have been developed. The aim of current study was set to investigate the wear resistance performance of 8 different hard-coatings applied on a tool steel material AISI D2. Roller-like shaped and coated die samples were subjected to non-reciprocating wear tests against two different AHSS sheet blanks (DP 780, LCE 1000) for 2-4 km long. Wear performances were evaluated by means of specific wear rate, microscopic examination as well as 3-D surface roughness parameters. Results showed slightly higher wear resistance for TiAlN and CrN coated samples. It was also noted that the sheet blank material, and its surface properties affected the wear resistance performance.

AB - Stamping of advanced high strength steel (AHSS) sheet blanks lead to elevated level of wear, surface quality issues and consequently production interruptions. In order to address wear-oriented problems in stamping dies several countermeasures have been developed. The aim of current study was set to investigate the wear resistance performance of 8 different hard-coatings applied on a tool steel material AISI D2. Roller-like shaped and coated die samples were subjected to non-reciprocating wear tests against two different AHSS sheet blanks (DP 780, LCE 1000) for 2-4 km long. Wear performances were evaluated by means of specific wear rate, microscopic examination as well as 3-D surface roughness parameters. Results showed slightly higher wear resistance for TiAlN and CrN coated samples. It was also noted that the sheet blank material, and its surface properties affected the wear resistance performance.

KW - AHSS

KW - Coatings

KW - Die wear

KW - Stamping

KW - Surface metrology

UR - http://www.scopus.com/inward/record.url?scp=85063581879&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85063581879&partnerID=8YFLogxK

U2 - 10.1016/j.promfg.2018.07.282

DO - 10.1016/j.promfg.2018.07.282

M3 - Conference article

VL - 15

SP - 590

EP - 596

JO - Procedia Manufacturing

JF - Procedia Manufacturing

SN - 2351-9789

ER -