Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges

M. Afsari, Mahmood Amani, S. M. Razmgir, H. Karimi, S. Yousefi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Drilling through subjected mature offshore oil field is made more challenging by problems arising from wellbore instability, mud losses, excessive cutting, tight hole, stuck pipes and kick/flow zones for last few years. These problematic layers have caused quite a significant NPT (non productive time) during drilling. For better understanding of factors causing wellbore instability problem and to predict mud weight window to be used for future wells, construction of mechanical earth model (MEM) was essential. Mechanical Earth Model (MEM) is a numerical representation of the state of stress and rock mechanical properties for a specific stratigraphic section in a field or basin2. In this study main drilling problems for each drilling interval in this field were described afterward different stages for construction an 1D Mechanical Earth Model (MEM) for the field was established. It was then demonstrated that how 1D MEM could be used to predict and prevent the common instability problems encountered during drilling. For making MEM different sources of data including, drilling data, formation evaluation data, well testing, etc were used. After making MEM for the field, safe and intact mud weight window was determined and according to that, suggestions for optimum mud weight for stable borehole on each interval was made. MEM for this field can now be used to predict not only the safe mud weight window and possible drilling hazards, but can also be used for studies like reservoir compaction, sand production, and perforation stability and so on.

Original languageEnglish
Title of host publicationSociety of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC
Pages2976-2987
Number of pages12
Volume4
Publication statusPublished - 2010
Externally publishedYes
EventInternational Oil and Gas Conference and Exhibition in China 2010: Opportunities and Challenges in a Volatile Environment, IOGCEC - Beijing, China
Duration: 8 Jun 201010 Jun 2010

Other

OtherInternational Oil and Gas Conference and Exhibition in China 2010: Opportunities and Challenges in a Volatile Environment, IOGCEC
CountryChina
CityBeijing
Period8/6/1010/6/10

Fingerprint

Oil fields
oil field
Drilling
Earth (planet)
drilling
mud
Offshore oil fields
Well testing
well testing
perforation
Boreholes
mechanical property
compaction
Hazards
Compaction
Sand
pipe
borehole
Rocks
Pipe

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Energy Engineering and Power Technology
  • Fuel Technology

Cite this

Afsari, M., Amani, M., Razmgir, S. M., Karimi, H., & Yousefi, S. (2010). Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges. In Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC (Vol. 4, pp. 2976-2987)

Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges. / Afsari, M.; Amani, Mahmood; Razmgir, S. M.; Karimi, H.; Yousefi, S.

Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC. Vol. 4 2010. p. 2976-2987.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Afsari, M, Amani, M, Razmgir, SM, Karimi, H & Yousefi, S 2010, Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges. in Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC. vol. 4, pp. 2976-2987, International Oil and Gas Conference and Exhibition in China 2010: Opportunities and Challenges in a Volatile Environment, IOGCEC, Beijing, China, 8/6/10.
Afsari M, Amani M, Razmgir SM, Karimi H, Yousefi S. Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges. In Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC. Vol. 4. 2010. p. 2976-2987
Afsari, M. ; Amani, Mahmood ; Razmgir, S. M. ; Karimi, H. ; Yousefi, S. / Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges. Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC. Vol. 4 2010. pp. 2976-2987
@inproceedings{9294b0cf8d794b14b0c6f9b279b4d11b,
title = "Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges",
abstract = "Drilling through subjected mature offshore oil field is made more challenging by problems arising from wellbore instability, mud losses, excessive cutting, tight hole, stuck pipes and kick/flow zones for last few years. These problematic layers have caused quite a significant NPT (non productive time) during drilling. For better understanding of factors causing wellbore instability problem and to predict mud weight window to be used for future wells, construction of mechanical earth model (MEM) was essential. Mechanical Earth Model (MEM) is a numerical representation of the state of stress and rock mechanical properties for a specific stratigraphic section in a field or basin2. In this study main drilling problems for each drilling interval in this field were described afterward different stages for construction an 1D Mechanical Earth Model (MEM) for the field was established. It was then demonstrated that how 1D MEM could be used to predict and prevent the common instability problems encountered during drilling. For making MEM different sources of data including, drilling data, formation evaluation data, well testing, etc were used. After making MEM for the field, safe and intact mud weight window was determined and according to that, suggestions for optimum mud weight for stable borehole on each interval was made. MEM for this field can now be used to predict not only the safe mud weight window and possible drilling hazards, but can also be used for studies like reservoir compaction, sand production, and perforation stability and so on.",
author = "M. Afsari and Mahmood Amani and Razmgir, {S. M.} and H. Karimi and S. Yousefi",
year = "2010",
language = "English",
isbn = "9781617388866",
volume = "4",
pages = "2976--2987",
booktitle = "Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC",

}

TY - GEN

T1 - Using drilling and logging data for developing 1D mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges

AU - Afsari, M.

AU - Amani, Mahmood

AU - Razmgir, S. M.

AU - Karimi, H.

AU - Yousefi, S.

PY - 2010

Y1 - 2010

N2 - Drilling through subjected mature offshore oil field is made more challenging by problems arising from wellbore instability, mud losses, excessive cutting, tight hole, stuck pipes and kick/flow zones for last few years. These problematic layers have caused quite a significant NPT (non productive time) during drilling. For better understanding of factors causing wellbore instability problem and to predict mud weight window to be used for future wells, construction of mechanical earth model (MEM) was essential. Mechanical Earth Model (MEM) is a numerical representation of the state of stress and rock mechanical properties for a specific stratigraphic section in a field or basin2. In this study main drilling problems for each drilling interval in this field were described afterward different stages for construction an 1D Mechanical Earth Model (MEM) for the field was established. It was then demonstrated that how 1D MEM could be used to predict and prevent the common instability problems encountered during drilling. For making MEM different sources of data including, drilling data, formation evaluation data, well testing, etc were used. After making MEM for the field, safe and intact mud weight window was determined and according to that, suggestions for optimum mud weight for stable borehole on each interval was made. MEM for this field can now be used to predict not only the safe mud weight window and possible drilling hazards, but can also be used for studies like reservoir compaction, sand production, and perforation stability and so on.

AB - Drilling through subjected mature offshore oil field is made more challenging by problems arising from wellbore instability, mud losses, excessive cutting, tight hole, stuck pipes and kick/flow zones for last few years. These problematic layers have caused quite a significant NPT (non productive time) during drilling. For better understanding of factors causing wellbore instability problem and to predict mud weight window to be used for future wells, construction of mechanical earth model (MEM) was essential. Mechanical Earth Model (MEM) is a numerical representation of the state of stress and rock mechanical properties for a specific stratigraphic section in a field or basin2. In this study main drilling problems for each drilling interval in this field were described afterward different stages for construction an 1D Mechanical Earth Model (MEM) for the field was established. It was then demonstrated that how 1D MEM could be used to predict and prevent the common instability problems encountered during drilling. For making MEM different sources of data including, drilling data, formation evaluation data, well testing, etc were used. After making MEM for the field, safe and intact mud weight window was determined and according to that, suggestions for optimum mud weight for stable borehole on each interval was made. MEM for this field can now be used to predict not only the safe mud weight window and possible drilling hazards, but can also be used for studies like reservoir compaction, sand production, and perforation stability and so on.

UR - http://www.scopus.com/inward/record.url?scp=78650621677&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78650621677&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9781617388866

VL - 4

SP - 2976

EP - 2987

BT - Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC

ER -