Thin-film composite membrane on a compacted woven backing fabric for pressure assisted osmosis

Soleyman Sahebi, Sherub Phuntsho, Leonard Tijing, Gang Han, Dong Suk Han, Ahmed Abdel-Wahab, Ho Kyong Shon

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

The water flux in forward osmosis (FO) process declines substantially when the draw solution (DS) concentration reaches closer to the point of osmotic equilibrium with the feed solution (FS). Using external hydraulic pressure alongside the osmotic driving force in the pressure assisted osmosis (PAO) has been found effective in terms of enhancing water flux and even potentially diluting the DS beyond osmotic equilibrium. The net gain in water flux due to the applied pressure in the PAO process closely depends on the permeability of the FO membrane. The commercial flat sheet cellulose triacetate (CTA) FO membrane has low water permeability and hence the effective gain in water flux in the PAO process is low. In this study, a high performance thin film composite membrane was developed especially for the PAO process through casting polyethersulfone (PES) polymer solution on a compacted woven fabric mesh support followed by interfacial polymerisation for polyamide active layer. This PAO membrane possesses a water flux of 37 L m2 h− 1 using 0.5 M NaCl as DS and deionised water as the feed at an applied hydraulic pressure of 10 bar. Besides, the membrane was able to endure the external hydraulic pressure required for the PAO process owing to the embedded backing fabric support. While the membranes with low structural parameters are essential for higher water flux, this study shows that for PAO process, polymeric membranes with larger structural parameters may not be suitable for PAO. They generally resulted in compaction and poor mechanical strength to withstand hydraulic pressure.

Original languageEnglish
Pages (from-to)98-108
Number of pages11
JournalDesalination
Volume406
DOIs
Publication statusPublished - 16 Mar 2017

Fingerprint

Osmosis
Composite membranes
osmosis
membrane
Thin films
Fluxes
Water
Osmosis membranes
Hydraulics
hydraulics
water
fabric
permeability
Membranes
Polymeric membranes
active layer
Deionized water
Nylons
Polymer solutions
Polyamides

Keywords

  • Backing fabric support
  • Forward osmosis
  • Pressure assisted osmosis
  • Structural parameter
  • Thin-film composite membrane

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Science(all)
  • Water Science and Technology
  • Mechanical Engineering

Cite this

Thin-film composite membrane on a compacted woven backing fabric for pressure assisted osmosis. / Sahebi, Soleyman; Phuntsho, Sherub; Tijing, Leonard; Han, Gang; Han, Dong Suk; Abdel-Wahab, Ahmed; Shon, Ho Kyong.

In: Desalination, Vol. 406, 16.03.2017, p. 98-108.

Research output: Contribution to journalArticle

Sahebi, Soleyman ; Phuntsho, Sherub ; Tijing, Leonard ; Han, Gang ; Han, Dong Suk ; Abdel-Wahab, Ahmed ; Shon, Ho Kyong. / Thin-film composite membrane on a compacted woven backing fabric for pressure assisted osmosis. In: Desalination. 2017 ; Vol. 406. pp. 98-108.
@article{85cde87e9bab4f97a2bdc8e38f0d8361,
title = "Thin-film composite membrane on a compacted woven backing fabric for pressure assisted osmosis",
abstract = "The water flux in forward osmosis (FO) process declines substantially when the draw solution (DS) concentration reaches closer to the point of osmotic equilibrium with the feed solution (FS). Using external hydraulic pressure alongside the osmotic driving force in the pressure assisted osmosis (PAO) has been found effective in terms of enhancing water flux and even potentially diluting the DS beyond osmotic equilibrium. The net gain in water flux due to the applied pressure in the PAO process closely depends on the permeability of the FO membrane. The commercial flat sheet cellulose triacetate (CTA) FO membrane has low water permeability and hence the effective gain in water flux in the PAO process is low. In this study, a high performance thin film composite membrane was developed especially for the PAO process through casting polyethersulfone (PES) polymer solution on a compacted woven fabric mesh support followed by interfacial polymerisation for polyamide active layer. This PAO membrane possesses a water flux of 37 L m2 h− 1 using 0.5 M NaCl as DS and deionised water as the feed at an applied hydraulic pressure of 10 bar. Besides, the membrane was able to endure the external hydraulic pressure required for the PAO process owing to the embedded backing fabric support. While the membranes with low structural parameters are essential for higher water flux, this study shows that for PAO process, polymeric membranes with larger structural parameters may not be suitable for PAO. They generally resulted in compaction and poor mechanical strength to withstand hydraulic pressure.",
keywords = "Backing fabric support, Forward osmosis, Pressure assisted osmosis, Structural parameter, Thin-film composite membrane",
author = "Soleyman Sahebi and Sherub Phuntsho and Leonard Tijing and Gang Han and Han, {Dong Suk} and Ahmed Abdel-Wahab and Shon, {Ho Kyong}",
year = "2017",
month = "3",
day = "16",
doi = "10.1016/j.desal.2016.06.001",
language = "English",
volume = "406",
pages = "98--108",
journal = "Desalination",
issn = "0011-9164",
publisher = "Elsevier",

}

TY - JOUR

T1 - Thin-film composite membrane on a compacted woven backing fabric for pressure assisted osmosis

AU - Sahebi, Soleyman

AU - Phuntsho, Sherub

AU - Tijing, Leonard

AU - Han, Gang

AU - Han, Dong Suk

AU - Abdel-Wahab, Ahmed

AU - Shon, Ho Kyong

PY - 2017/3/16

Y1 - 2017/3/16

N2 - The water flux in forward osmosis (FO) process declines substantially when the draw solution (DS) concentration reaches closer to the point of osmotic equilibrium with the feed solution (FS). Using external hydraulic pressure alongside the osmotic driving force in the pressure assisted osmosis (PAO) has been found effective in terms of enhancing water flux and even potentially diluting the DS beyond osmotic equilibrium. The net gain in water flux due to the applied pressure in the PAO process closely depends on the permeability of the FO membrane. The commercial flat sheet cellulose triacetate (CTA) FO membrane has low water permeability and hence the effective gain in water flux in the PAO process is low. In this study, a high performance thin film composite membrane was developed especially for the PAO process through casting polyethersulfone (PES) polymer solution on a compacted woven fabric mesh support followed by interfacial polymerisation for polyamide active layer. This PAO membrane possesses a water flux of 37 L m2 h− 1 using 0.5 M NaCl as DS and deionised water as the feed at an applied hydraulic pressure of 10 bar. Besides, the membrane was able to endure the external hydraulic pressure required for the PAO process owing to the embedded backing fabric support. While the membranes with low structural parameters are essential for higher water flux, this study shows that for PAO process, polymeric membranes with larger structural parameters may not be suitable for PAO. They generally resulted in compaction and poor mechanical strength to withstand hydraulic pressure.

AB - The water flux in forward osmosis (FO) process declines substantially when the draw solution (DS) concentration reaches closer to the point of osmotic equilibrium with the feed solution (FS). Using external hydraulic pressure alongside the osmotic driving force in the pressure assisted osmosis (PAO) has been found effective in terms of enhancing water flux and even potentially diluting the DS beyond osmotic equilibrium. The net gain in water flux due to the applied pressure in the PAO process closely depends on the permeability of the FO membrane. The commercial flat sheet cellulose triacetate (CTA) FO membrane has low water permeability and hence the effective gain in water flux in the PAO process is low. In this study, a high performance thin film composite membrane was developed especially for the PAO process through casting polyethersulfone (PES) polymer solution on a compacted woven fabric mesh support followed by interfacial polymerisation for polyamide active layer. This PAO membrane possesses a water flux of 37 L m2 h− 1 using 0.5 M NaCl as DS and deionised water as the feed at an applied hydraulic pressure of 10 bar. Besides, the membrane was able to endure the external hydraulic pressure required for the PAO process owing to the embedded backing fabric support. While the membranes with low structural parameters are essential for higher water flux, this study shows that for PAO process, polymeric membranes with larger structural parameters may not be suitable for PAO. They generally resulted in compaction and poor mechanical strength to withstand hydraulic pressure.

KW - Backing fabric support

KW - Forward osmosis

KW - Pressure assisted osmosis

KW - Structural parameter

KW - Thin-film composite membrane

UR - http://www.scopus.com/inward/record.url?scp=84973560571&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84973560571&partnerID=8YFLogxK

U2 - 10.1016/j.desal.2016.06.001

DO - 10.1016/j.desal.2016.06.001

M3 - Article

VL - 406

SP - 98

EP - 108

JO - Desalination

JF - Desalination

SN - 0011-9164

ER -