Spray characteristics of Fischer-Tropsch alternate jet fuels

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Increase in energy demand and stringent emission norms drive the need for clean, alternative energy source. Recently, gas-to-liquid (GTL), a synthetic jet fuel produced from natural gas using Fischer-Tropsch synthesis has grabbed global attention due to its cleaner combustion aspects when compared to the conventional jet fuel. The chemical and physical properties of GTL fuels are different from the conventional fuels which could potentially affect the atomization and in turn the combustion characteristics and pollutant formation. In this work the spray characteristics of two GTL blends and conventional Jet A-1 fuels are investigated downstream of a pressure swirl nozzle exit at two injection pressures and the results are then compared. Microscopic spray characteristics, droplet size and velocity distributions are obtained at global as well as local levels of the spray using global sizing velocimetry and phase Doppler anemometry measurement techniques, respectively. Results clearly show that although the GTL fuels have different physical properties, such as viscosity, density, and surface tension the spray characteristics of the GTL fuels are found to be similar to those of Jet A-l fuel.

Original languageEnglish
Title of host publicationASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013
Volume2
DOIs
Publication statusPublished - 2013
EventASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013 - San Antonio, Tx, United States
Duration: 3 Jun 20137 Jun 2013

Other

OtherASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013
CountryUnited States
CitySan Antonio, Tx
Period3/6/137/6/13

Fingerprint

Jet fuel
Liquid fuels
Gases
Physical properties
Synthetic fuels
Fischer-Tropsch synthesis
Liquids
Atomization
Velocity distribution
Velocity measurement
Chemical properties
Surface tension
Nozzles
Natural gas
Viscosity

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Kannaiyan, K., & Sadr, R. (2013). Spray characteristics of Fischer-Tropsch alternate jet fuels. In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013 (Vol. 2) https://doi.org/10.1115/GT2013-95761

Spray characteristics of Fischer-Tropsch alternate jet fuels. / Kannaiyan, Kumaran; Sadr, Reza.

ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. Vol. 2 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kannaiyan, K & Sadr, R 2013, Spray characteristics of Fischer-Tropsch alternate jet fuels. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. vol. 2, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, San Antonio, Tx, United States, 3/6/13. https://doi.org/10.1115/GT2013-95761
Kannaiyan K, Sadr R. Spray characteristics of Fischer-Tropsch alternate jet fuels. In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. Vol. 2. 2013 https://doi.org/10.1115/GT2013-95761
Kannaiyan, Kumaran ; Sadr, Reza. / Spray characteristics of Fischer-Tropsch alternate jet fuels. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. Vol. 2 2013.
@inproceedings{6518c22b8a1041f8ba595cae805c0c68,
title = "Spray characteristics of Fischer-Tropsch alternate jet fuels",
abstract = "Increase in energy demand and stringent emission norms drive the need for clean, alternative energy source. Recently, gas-to-liquid (GTL), a synthetic jet fuel produced from natural gas using Fischer-Tropsch synthesis has grabbed global attention due to its cleaner combustion aspects when compared to the conventional jet fuel. The chemical and physical properties of GTL fuels are different from the conventional fuels which could potentially affect the atomization and in turn the combustion characteristics and pollutant formation. In this work the spray characteristics of two GTL blends and conventional Jet A-1 fuels are investigated downstream of a pressure swirl nozzle exit at two injection pressures and the results are then compared. Microscopic spray characteristics, droplet size and velocity distributions are obtained at global as well as local levels of the spray using global sizing velocimetry and phase Doppler anemometry measurement techniques, respectively. Results clearly show that although the GTL fuels have different physical properties, such as viscosity, density, and surface tension the spray characteristics of the GTL fuels are found to be similar to those of Jet A-l fuel.",
author = "Kumaran Kannaiyan and Reza Sadr",
year = "2013",
doi = "10.1115/GT2013-95761",
language = "English",
isbn = "9780791855133",
volume = "2",
booktitle = "ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013",

}

TY - GEN

T1 - Spray characteristics of Fischer-Tropsch alternate jet fuels

AU - Kannaiyan, Kumaran

AU - Sadr, Reza

PY - 2013

Y1 - 2013

N2 - Increase in energy demand and stringent emission norms drive the need for clean, alternative energy source. Recently, gas-to-liquid (GTL), a synthetic jet fuel produced from natural gas using Fischer-Tropsch synthesis has grabbed global attention due to its cleaner combustion aspects when compared to the conventional jet fuel. The chemical and physical properties of GTL fuels are different from the conventional fuels which could potentially affect the atomization and in turn the combustion characteristics and pollutant formation. In this work the spray characteristics of two GTL blends and conventional Jet A-1 fuels are investigated downstream of a pressure swirl nozzle exit at two injection pressures and the results are then compared. Microscopic spray characteristics, droplet size and velocity distributions are obtained at global as well as local levels of the spray using global sizing velocimetry and phase Doppler anemometry measurement techniques, respectively. Results clearly show that although the GTL fuels have different physical properties, such as viscosity, density, and surface tension the spray characteristics of the GTL fuels are found to be similar to those of Jet A-l fuel.

AB - Increase in energy demand and stringent emission norms drive the need for clean, alternative energy source. Recently, gas-to-liquid (GTL), a synthetic jet fuel produced from natural gas using Fischer-Tropsch synthesis has grabbed global attention due to its cleaner combustion aspects when compared to the conventional jet fuel. The chemical and physical properties of GTL fuels are different from the conventional fuels which could potentially affect the atomization and in turn the combustion characteristics and pollutant formation. In this work the spray characteristics of two GTL blends and conventional Jet A-1 fuels are investigated downstream of a pressure swirl nozzle exit at two injection pressures and the results are then compared. Microscopic spray characteristics, droplet size and velocity distributions are obtained at global as well as local levels of the spray using global sizing velocimetry and phase Doppler anemometry measurement techniques, respectively. Results clearly show that although the GTL fuels have different physical properties, such as viscosity, density, and surface tension the spray characteristics of the GTL fuels are found to be similar to those of Jet A-l fuel.

UR - http://www.scopus.com/inward/record.url?scp=84890147665&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84890147665&partnerID=8YFLogxK

U2 - 10.1115/GT2013-95761

DO - 10.1115/GT2013-95761

M3 - Conference contribution

SN - 9780791855133

VL - 2

BT - ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013

ER -