Redundancy analysis for tin oxide gas sensor array

Minghua Shi, Bin Guo, Amine Bermak

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Using gas sensor array is widely accepted to overcome the non-selectivity of a single sensor. For tin oxide gas sensors, the size of array can't be very large due to the limited number of doping materials. In this paper, our experimental results shows that duplication of the sensors doped by the same metal is an efficient way to improve the selectivity of the array due to the fabrication mismatch of the sensor chip. We also compare two methods of reducing the dimension of gas patterns: removing the sensors providing redundant information in the array and using principle component analysis (PCA). The experimental results shows that when the number of components is too large PCA can be a useful tool to reduce the data dimension.

Original languageEnglish
Title of host publicationProceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006
Pages448-451
Number of pages4
Volume2006
DOIs
Publication statusPublished - 2006
Externally publishedYes
EventThird IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006 - Kuala Lumpur, Malaysia
Duration: 17 Jan 200619 Jan 2006

Other

OtherThird IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006
CountryMalaysia
CityKuala Lumpur
Period17/1/0619/1/06

Fingerprint

Sensor arrays
Tin oxides
Chemical sensors
Redundancy
Sensors
Doping (additives)
Fabrication
Metals
Gases

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Shi, M., Guo, B., & Bermak, A. (2006). Redundancy analysis for tin oxide gas sensor array. In Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006 (Vol. 2006, pp. 448-451). [1581256] https://doi.org/10.1109/DELTA.2006.75

Redundancy analysis for tin oxide gas sensor array. / Shi, Minghua; Guo, Bin; Bermak, Amine.

Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006. Vol. 2006 2006. p. 448-451 1581256.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shi, M, Guo, B & Bermak, A 2006, Redundancy analysis for tin oxide gas sensor array. in Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006. vol. 2006, 1581256, pp. 448-451, Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006, Kuala Lumpur, Malaysia, 17/1/06. https://doi.org/10.1109/DELTA.2006.75
Shi M, Guo B, Bermak A. Redundancy analysis for tin oxide gas sensor array. In Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006. Vol. 2006. 2006. p. 448-451. 1581256 https://doi.org/10.1109/DELTA.2006.75
Shi, Minghua ; Guo, Bin ; Bermak, Amine. / Redundancy analysis for tin oxide gas sensor array. Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006. Vol. 2006 2006. pp. 448-451
@inproceedings{e50f6ca074e54683bc4340eeafa55b25,
title = "Redundancy analysis for tin oxide gas sensor array",
abstract = "Using gas sensor array is widely accepted to overcome the non-selectivity of a single sensor. For tin oxide gas sensors, the size of array can't be very large due to the limited number of doping materials. In this paper, our experimental results shows that duplication of the sensors doped by the same metal is an efficient way to improve the selectivity of the array due to the fabrication mismatch of the sensor chip. We also compare two methods of reducing the dimension of gas patterns: removing the sensors providing redundant information in the array and using principle component analysis (PCA). The experimental results shows that when the number of components is too large PCA can be a useful tool to reduce the data dimension.",
author = "Minghua Shi and Bin Guo and Amine Bermak",
year = "2006",
doi = "10.1109/DELTA.2006.75",
language = "English",
isbn = "0769525008",
volume = "2006",
pages = "448--451",
booktitle = "Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006",

}

TY - GEN

T1 - Redundancy analysis for tin oxide gas sensor array

AU - Shi, Minghua

AU - Guo, Bin

AU - Bermak, Amine

PY - 2006

Y1 - 2006

N2 - Using gas sensor array is widely accepted to overcome the non-selectivity of a single sensor. For tin oxide gas sensors, the size of array can't be very large due to the limited number of doping materials. In this paper, our experimental results shows that duplication of the sensors doped by the same metal is an efficient way to improve the selectivity of the array due to the fabrication mismatch of the sensor chip. We also compare two methods of reducing the dimension of gas patterns: removing the sensors providing redundant information in the array and using principle component analysis (PCA). The experimental results shows that when the number of components is too large PCA can be a useful tool to reduce the data dimension.

AB - Using gas sensor array is widely accepted to overcome the non-selectivity of a single sensor. For tin oxide gas sensors, the size of array can't be very large due to the limited number of doping materials. In this paper, our experimental results shows that duplication of the sensors doped by the same metal is an efficient way to improve the selectivity of the array due to the fabrication mismatch of the sensor chip. We also compare two methods of reducing the dimension of gas patterns: removing the sensors providing redundant information in the array and using principle component analysis (PCA). The experimental results shows that when the number of components is too large PCA can be a useful tool to reduce the data dimension.

UR - http://www.scopus.com/inward/record.url?scp=33847154566&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847154566&partnerID=8YFLogxK

U2 - 10.1109/DELTA.2006.75

DO - 10.1109/DELTA.2006.75

M3 - Conference contribution

AN - SCOPUS:33847154566

SN - 0769525008

SN - 9780769525006

VL - 2006

SP - 448

EP - 451

BT - Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006

ER -