Quantifying the skin factor for estimating the completion efficiency of perforation tunnels in petroleum wells

Azizur Rahaman, S. Mustafiz, M. Koksal, M. R. Islam

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Conventional methods of perforation by shooting (PS) cannot achieve the expected wellbore productivity due to the presence of a region of reduced permeability around the perforation tunnel. Even though this phenomenon is well-known in the petroleum industry, few have attempted to quantify the damage due to PS. This paper quantifies the permeability damage followed by the recommendation of a novel perforation technique. This study has established that permeability of an open-hole is reduced in the range of 30%-75% due to the implementation of the PS technique. In order to remedy this problem, a new perforation technique called perforation by drilling (PD) has been proposed in this paper. To simulate a perforated completion, cylindrical sand samples with varying strength and porosity were prepared. These samples were perforated by the PS, PD and Casting techniques. Perforations created by the Casting techniques are considered to be representative of open-hole perforation tunnels. An important measure of flow efficiency or productivity of perforation completions can be referred to as skin factor (s) and productivity index (PI). In this paper, the performance of the PS, PD, and Casting technique was evaluated in terms of skin factors. Experimental results suggest that the skin factor is reduced substantially when the PS technique is replaced by PD technique resulting in significant improvement in PI. Finally, a mathematical model is used to predict permeability values with various perforation techniques. The mathematical model results agree closely with experimental observation.

Original languageEnglish
Pages (from-to)99-110
Number of pages12
JournalJournal of Petroleum Science and Engineering
Volume58
Issue number1-2
DOIs
Publication statusPublished - Aug 2007
Externally publishedYes

Fingerprint

Well perforation
Well completion
perforation
skin
Drilling
Skin
Tunnels
tunnel
Crude oil
Productivity
petroleum
well
Casting
Explosive well stimulation
Mathematical models
Petroleum industry
Sand
Porosity
drilling
permeability

Keywords

  • Damage ratio
  • Perforation
  • Perforation density
  • Perforation phasing
  • Productivity index
  • Scaling
  • Skin

ASJC Scopus subject areas

  • Fuel Technology
  • Geotechnical Engineering and Engineering Geology

Cite this

Quantifying the skin factor for estimating the completion efficiency of perforation tunnels in petroleum wells. / Rahaman, Azizur; Mustafiz, S.; Koksal, M.; Islam, M. R.

In: Journal of Petroleum Science and Engineering, Vol. 58, No. 1-2, 08.2007, p. 99-110.

Research output: Contribution to journalArticle

@article{e8d42ab3e00740d5b4307c1edc547051,
title = "Quantifying the skin factor for estimating the completion efficiency of perforation tunnels in petroleum wells",
abstract = "Conventional methods of perforation by shooting (PS) cannot achieve the expected wellbore productivity due to the presence of a region of reduced permeability around the perforation tunnel. Even though this phenomenon is well-known in the petroleum industry, few have attempted to quantify the damage due to PS. This paper quantifies the permeability damage followed by the recommendation of a novel perforation technique. This study has established that permeability of an open-hole is reduced in the range of 30{\%}-75{\%} due to the implementation of the PS technique. In order to remedy this problem, a new perforation technique called perforation by drilling (PD) has been proposed in this paper. To simulate a perforated completion, cylindrical sand samples with varying strength and porosity were prepared. These samples were perforated by the PS, PD and Casting techniques. Perforations created by the Casting techniques are considered to be representative of open-hole perforation tunnels. An important measure of flow efficiency or productivity of perforation completions can be referred to as skin factor (s) and productivity index (PI). In this paper, the performance of the PS, PD, and Casting technique was evaluated in terms of skin factors. Experimental results suggest that the skin factor is reduced substantially when the PS technique is replaced by PD technique resulting in significant improvement in PI. Finally, a mathematical model is used to predict permeability values with various perforation techniques. The mathematical model results agree closely with experimental observation.",
keywords = "Damage ratio, Perforation, Perforation density, Perforation phasing, Productivity index, Scaling, Skin",
author = "Azizur Rahaman and S. Mustafiz and M. Koksal and Islam, {M. R.}",
year = "2007",
month = "8",
doi = "10.1016/j.petrol.2006.11.012",
language = "English",
volume = "58",
pages = "99--110",
journal = "Journal of Petroleum Science and Engineering",
issn = "0920-4105",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Quantifying the skin factor for estimating the completion efficiency of perforation tunnels in petroleum wells

AU - Rahaman, Azizur

AU - Mustafiz, S.

AU - Koksal, M.

AU - Islam, M. R.

PY - 2007/8

Y1 - 2007/8

N2 - Conventional methods of perforation by shooting (PS) cannot achieve the expected wellbore productivity due to the presence of a region of reduced permeability around the perforation tunnel. Even though this phenomenon is well-known in the petroleum industry, few have attempted to quantify the damage due to PS. This paper quantifies the permeability damage followed by the recommendation of a novel perforation technique. This study has established that permeability of an open-hole is reduced in the range of 30%-75% due to the implementation of the PS technique. In order to remedy this problem, a new perforation technique called perforation by drilling (PD) has been proposed in this paper. To simulate a perforated completion, cylindrical sand samples with varying strength and porosity were prepared. These samples were perforated by the PS, PD and Casting techniques. Perforations created by the Casting techniques are considered to be representative of open-hole perforation tunnels. An important measure of flow efficiency or productivity of perforation completions can be referred to as skin factor (s) and productivity index (PI). In this paper, the performance of the PS, PD, and Casting technique was evaluated in terms of skin factors. Experimental results suggest that the skin factor is reduced substantially when the PS technique is replaced by PD technique resulting in significant improvement in PI. Finally, a mathematical model is used to predict permeability values with various perforation techniques. The mathematical model results agree closely with experimental observation.

AB - Conventional methods of perforation by shooting (PS) cannot achieve the expected wellbore productivity due to the presence of a region of reduced permeability around the perforation tunnel. Even though this phenomenon is well-known in the petroleum industry, few have attempted to quantify the damage due to PS. This paper quantifies the permeability damage followed by the recommendation of a novel perforation technique. This study has established that permeability of an open-hole is reduced in the range of 30%-75% due to the implementation of the PS technique. In order to remedy this problem, a new perforation technique called perforation by drilling (PD) has been proposed in this paper. To simulate a perforated completion, cylindrical sand samples with varying strength and porosity were prepared. These samples were perforated by the PS, PD and Casting techniques. Perforations created by the Casting techniques are considered to be representative of open-hole perforation tunnels. An important measure of flow efficiency or productivity of perforation completions can be referred to as skin factor (s) and productivity index (PI). In this paper, the performance of the PS, PD, and Casting technique was evaluated in terms of skin factors. Experimental results suggest that the skin factor is reduced substantially when the PS technique is replaced by PD technique resulting in significant improvement in PI. Finally, a mathematical model is used to predict permeability values with various perforation techniques. The mathematical model results agree closely with experimental observation.

KW - Damage ratio

KW - Perforation

KW - Perforation density

KW - Perforation phasing

KW - Productivity index

KW - Scaling

KW - Skin

UR - http://www.scopus.com/inward/record.url?scp=34447624668&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34447624668&partnerID=8YFLogxK

U2 - 10.1016/j.petrol.2006.11.012

DO - 10.1016/j.petrol.2006.11.012

M3 - Article

AN - SCOPUS:34447624668

VL - 58

SP - 99

EP - 110

JO - Journal of Petroleum Science and Engineering

JF - Journal of Petroleum Science and Engineering

SN - 0920-4105

IS - 1-2

ER -