Predictive torque control of brushless doubly fed induction generator fed by a matrix converter

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In this paper, a predictive torque control (PTC) approach for brushless doubly fed induction generators (BDFIG) fed by matrix converter is developed and investigated. Unlike the traditional DFIG, the BDFIG needs lower maintenance cost because it operates without slip rings and brushes. Furthermore, as a promising alternative to the traditional back-to-back inverter, a matrix converter is employed owing to its high power density. Thus, the advantages of BDFIG and matrix converter have been brought together in order to obtain a wind energy conversion system that has high power density as well as high reliability against mechanical faults. To overcome the drawbacks of the cascaded control structure, such as slow dynamic response and reduced control bandwidth, the torque of the BDFIG is controlled by a PTC method. Therefore, the discrete-time model of the BDFIG supplied by the matrix converter is first derived ad inserted into the predictive control routine. For examining the performance of the developed control strategy, simulations based on MATLAB/Simulink are carried out under steady-state and transient conditions. The test results indicate that the Prasented system exhibits good steady-state and dynamic performance.

Original languageEnglish
Title of host publicationProceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1-6
Number of pages6
ISBN (Electronic)9781538625088
DOIs
Publication statusPublished - 4 Jun 2018
Event12th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018 - Doha, Qatar
Duration: 10 Apr 201812 Apr 2018

Other

Other12th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018
CountryQatar
CityDoha
Period10/4/1812/4/18

Fingerprint

Asynchronous generators
Torque control
Brushes
Energy conversion
Wind power
MATLAB
Dynamic response
Torque
Matrix converters
Bandwidth
Costs

Keywords

  • Brushless doubly fed induction generator
  • Matrix converter
  • Predictive torque control
  • Wind energy conversion

ASJC Scopus subject areas

  • Hardware and Architecture
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Bayhan, S., Kakosimos, P., & Rivera, M. (2018). Predictive torque control of brushless doubly fed induction generator fed by a matrix converter. In Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018 (pp. 1-6). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CPE.2018.8372497

Predictive torque control of brushless doubly fed induction generator fed by a matrix converter. / Bayhan, Sertac; Kakosimos, Panagiotis; Rivera, Marco.

Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-6.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bayhan, S, Kakosimos, P & Rivera, M 2018, Predictive torque control of brushless doubly fed induction generator fed by a matrix converter. in Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018. Institute of Electrical and Electronics Engineers Inc., pp. 1-6, 12th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018, Doha, Qatar, 10/4/18. https://doi.org/10.1109/CPE.2018.8372497
Bayhan S, Kakosimos P, Rivera M. Predictive torque control of brushless doubly fed induction generator fed by a matrix converter. In Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 1-6 https://doi.org/10.1109/CPE.2018.8372497
Bayhan, Sertac ; Kakosimos, Panagiotis ; Rivera, Marco. / Predictive torque control of brushless doubly fed induction generator fed by a matrix converter. Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 1-6
@inproceedings{6da92a7f817340f481f12149dabe0620,
title = "Predictive torque control of brushless doubly fed induction generator fed by a matrix converter",
abstract = "In this paper, a predictive torque control (PTC) approach for brushless doubly fed induction generators (BDFIG) fed by matrix converter is developed and investigated. Unlike the traditional DFIG, the BDFIG needs lower maintenance cost because it operates without slip rings and brushes. Furthermore, as a promising alternative to the traditional back-to-back inverter, a matrix converter is employed owing to its high power density. Thus, the advantages of BDFIG and matrix converter have been brought together in order to obtain a wind energy conversion system that has high power density as well as high reliability against mechanical faults. To overcome the drawbacks of the cascaded control structure, such as slow dynamic response and reduced control bandwidth, the torque of the BDFIG is controlled by a PTC method. Therefore, the discrete-time model of the BDFIG supplied by the matrix converter is first derived ad inserted into the predictive control routine. For examining the performance of the developed control strategy, simulations based on MATLAB/Simulink are carried out under steady-state and transient conditions. The test results indicate that the Prasented system exhibits good steady-state and dynamic performance.",
keywords = "Brushless doubly fed induction generator, Matrix converter, Predictive torque control, Wind energy conversion",
author = "Sertac Bayhan and Panagiotis Kakosimos and Marco Rivera",
year = "2018",
month = "6",
day = "4",
doi = "10.1109/CPE.2018.8372497",
language = "English",
pages = "1--6",
booktitle = "Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Predictive torque control of brushless doubly fed induction generator fed by a matrix converter

AU - Bayhan, Sertac

AU - Kakosimos, Panagiotis

AU - Rivera, Marco

PY - 2018/6/4

Y1 - 2018/6/4

N2 - In this paper, a predictive torque control (PTC) approach for brushless doubly fed induction generators (BDFIG) fed by matrix converter is developed and investigated. Unlike the traditional DFIG, the BDFIG needs lower maintenance cost because it operates without slip rings and brushes. Furthermore, as a promising alternative to the traditional back-to-back inverter, a matrix converter is employed owing to its high power density. Thus, the advantages of BDFIG and matrix converter have been brought together in order to obtain a wind energy conversion system that has high power density as well as high reliability against mechanical faults. To overcome the drawbacks of the cascaded control structure, such as slow dynamic response and reduced control bandwidth, the torque of the BDFIG is controlled by a PTC method. Therefore, the discrete-time model of the BDFIG supplied by the matrix converter is first derived ad inserted into the predictive control routine. For examining the performance of the developed control strategy, simulations based on MATLAB/Simulink are carried out under steady-state and transient conditions. The test results indicate that the Prasented system exhibits good steady-state and dynamic performance.

AB - In this paper, a predictive torque control (PTC) approach for brushless doubly fed induction generators (BDFIG) fed by matrix converter is developed and investigated. Unlike the traditional DFIG, the BDFIG needs lower maintenance cost because it operates without slip rings and brushes. Furthermore, as a promising alternative to the traditional back-to-back inverter, a matrix converter is employed owing to its high power density. Thus, the advantages of BDFIG and matrix converter have been brought together in order to obtain a wind energy conversion system that has high power density as well as high reliability against mechanical faults. To overcome the drawbacks of the cascaded control structure, such as slow dynamic response and reduced control bandwidth, the torque of the BDFIG is controlled by a PTC method. Therefore, the discrete-time model of the BDFIG supplied by the matrix converter is first derived ad inserted into the predictive control routine. For examining the performance of the developed control strategy, simulations based on MATLAB/Simulink are carried out under steady-state and transient conditions. The test results indicate that the Prasented system exhibits good steady-state and dynamic performance.

KW - Brushless doubly fed induction generator

KW - Matrix converter

KW - Predictive torque control

KW - Wind energy conversion

UR - http://www.scopus.com/inward/record.url?scp=85048861452&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048861452&partnerID=8YFLogxK

U2 - 10.1109/CPE.2018.8372497

DO - 10.1109/CPE.2018.8372497

M3 - Conference contribution

AN - SCOPUS:85048861452

SP - 1

EP - 6

BT - Proceedings - 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2018

PB - Institute of Electrical and Electronics Engineers Inc.

ER -