Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters

An experimental comparison

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Two control strategies, a finite-state predictive torque control and a linear control with space-vector PWM, are developed and experimentally assessed in this paper. Both strategies are used to control a permanent magnet synchronous motor supplied by a three-level neutral-point-clamped inverter. The high complexity of the drive system and the different nature of the control objectives make the development and implementation of the two strategies a challenge. In addition to the high computation resources that are required, the large number of the inverter voltage vectors further increases the computation load on the processor. This hinders the implementation into conventional hardware means and necessitates the use of advanced controller boards. Therefore, when controlling drives with multilevel inverters, the development of both control techniques requires special care. In this study, the operation of the two controllers is experimentally investigated, and their performances are assessed by considering several parameters under steady state and transient conditions.

Original languageEnglish
Title of host publicationProceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages2127-2132
Number of pages6
Volume2017-January
ISBN (Electronic)9781538611272
DOIs
Publication statusPublished - 15 Dec 2017
Event43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017 - Beijing, China
Duration: 29 Oct 20171 Nov 2017

Other

Other43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017
CountryChina
CityBeijing
Period29/10/171/11/17

Fingerprint

Electric drives
Linear Control
Torque control
Pulse width modulation
Torque
Inverter
Controller
Permanent Magnet Synchronous Motor
Controllers
Vector space
Control Strategy
Synchronous motors
Vector spaces
Voltage
Permanent magnets
Hardware
Resources
Electric potential
Strategy

Keywords

  • neutral-point clamped inverter
  • Permanent magnet motor drives
  • predictive torque control
  • space-vector modulation

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Control and Optimization
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Kakosimos, P., Bayhan, S., & Abu-Rub, H. (2017). Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters: An experimental comparison. In Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society (Vol. 2017-January, pp. 2127-2132). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IECON.2017.8216357

Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters : An experimental comparison. / Kakosimos, Panagiotis; Bayhan, Sertac; Abu-Rub, Haitham.

Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Vol. 2017-January Institute of Electrical and Electronics Engineers Inc., 2017. p. 2127-2132.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kakosimos, P, Bayhan, S & Abu-Rub, H 2017, Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters: An experimental comparison. in Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. vol. 2017-January, Institute of Electrical and Electronics Engineers Inc., pp. 2127-2132, 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017, Beijing, China, 29/10/17. https://doi.org/10.1109/IECON.2017.8216357
Kakosimos P, Bayhan S, Abu-Rub H. Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters: An experimental comparison. In Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Vol. 2017-January. Institute of Electrical and Electronics Engineers Inc. 2017. p. 2127-2132 https://doi.org/10.1109/IECON.2017.8216357
Kakosimos, Panagiotis ; Bayhan, Sertac ; Abu-Rub, Haitham. / Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters : An experimental comparison. Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Vol. 2017-January Institute of Electrical and Electronics Engineers Inc., 2017. pp. 2127-2132
@inproceedings{09e104f858a34322b66b3d8fbc82c40e,
title = "Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters: An experimental comparison",
abstract = "Two control strategies, a finite-state predictive torque control and a linear control with space-vector PWM, are developed and experimentally assessed in this paper. Both strategies are used to control a permanent magnet synchronous motor supplied by a three-level neutral-point-clamped inverter. The high complexity of the drive system and the different nature of the control objectives make the development and implementation of the two strategies a challenge. In addition to the high computation resources that are required, the large number of the inverter voltage vectors further increases the computation load on the processor. This hinders the implementation into conventional hardware means and necessitates the use of advanced controller boards. Therefore, when controlling drives with multilevel inverters, the development of both control techniques requires special care. In this study, the operation of the two controllers is experimentally investigated, and their performances are assessed by considering several parameters under steady state and transient conditions.",
keywords = "neutral-point clamped inverter, Permanent magnet motor drives, predictive torque control, space-vector modulation",
author = "Panagiotis Kakosimos and Sertac Bayhan and Haitham Abu-Rub",
year = "2017",
month = "12",
day = "15",
doi = "10.1109/IECON.2017.8216357",
language = "English",
volume = "2017-January",
pages = "2127--2132",
booktitle = "Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Predictive torque control and linear control with SV-PWM for electric drives with NPC inverters

T2 - An experimental comparison

AU - Kakosimos, Panagiotis

AU - Bayhan, Sertac

AU - Abu-Rub, Haitham

PY - 2017/12/15

Y1 - 2017/12/15

N2 - Two control strategies, a finite-state predictive torque control and a linear control with space-vector PWM, are developed and experimentally assessed in this paper. Both strategies are used to control a permanent magnet synchronous motor supplied by a three-level neutral-point-clamped inverter. The high complexity of the drive system and the different nature of the control objectives make the development and implementation of the two strategies a challenge. In addition to the high computation resources that are required, the large number of the inverter voltage vectors further increases the computation load on the processor. This hinders the implementation into conventional hardware means and necessitates the use of advanced controller boards. Therefore, when controlling drives with multilevel inverters, the development of both control techniques requires special care. In this study, the operation of the two controllers is experimentally investigated, and their performances are assessed by considering several parameters under steady state and transient conditions.

AB - Two control strategies, a finite-state predictive torque control and a linear control with space-vector PWM, are developed and experimentally assessed in this paper. Both strategies are used to control a permanent magnet synchronous motor supplied by a three-level neutral-point-clamped inverter. The high complexity of the drive system and the different nature of the control objectives make the development and implementation of the two strategies a challenge. In addition to the high computation resources that are required, the large number of the inverter voltage vectors further increases the computation load on the processor. This hinders the implementation into conventional hardware means and necessitates the use of advanced controller boards. Therefore, when controlling drives with multilevel inverters, the development of both control techniques requires special care. In this study, the operation of the two controllers is experimentally investigated, and their performances are assessed by considering several parameters under steady state and transient conditions.

KW - neutral-point clamped inverter

KW - Permanent magnet motor drives

KW - predictive torque control

KW - space-vector modulation

UR - http://www.scopus.com/inward/record.url?scp=85046637587&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85046637587&partnerID=8YFLogxK

U2 - 10.1109/IECON.2017.8216357

DO - 10.1109/IECON.2017.8216357

M3 - Conference contribution

VL - 2017-January

SP - 2127

EP - 2132

BT - Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society

PB - Institute of Electrical and Electronics Engineers Inc.

ER -