Power control of grid-connected high-gain boost full-bridge modular multilevel converter

Ahmed A. Elserougi, Ahmed M. Massoud, Shehab Ahmed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Conventional Modular Multilevel Converter (MMC) with half-bridge submodules (HB-SMs) can be used for gird-integration of renewable energy sources, but with limited voltage gain. To elevate the generated ac output voltage level, a bulky low-frequency step-up transformer can be employed at the converter ac side. Alternatively, single-stage dc-ac Boost FullBridge MMC (BFB-MMC) can be used effectively. In this paper, the performance of high-gain grid-connected BFB-MMC is investigated under active and reactive power control. The BFB-MMC can generate an ac output voltage with magnitude of kVdc where k is a positive integer number, and Vdc is the input dc voltage level. Each arm in the BFB-MMC contains (2k+1) Full-bridge submodules (FB-SMs) each rated at 0.5 Vdc. Each arm is controlled to generate bipolar sinusoidal stepped voltage ranged from (0.5+k) Vdc to (0.5-k)Vdc with steps of 0.5 Vdc while keeping the sum of upper and lower arm voltages in the same leg equals the input dc voltage. A Detailed illustration for BFB-MMC operational concept, capacitor voltage balancing technique, and active and reactive power controller is presented. Finally, simulation model for the grid-connected BFB-MMC has been built. The simulation results show the effectiveness of BFB-MMC in the grid-connected applications.

Original languageEnglish
Title of host publicationProceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1-5
Number of pages5
Volume2018-January
ISBN (Electronic)9781509064250
DOIs
Publication statusPublished - 6 Apr 2018
Event2017 IEEE Southern Power Electronics Conference, SPEC 2017 - Puerto Varas, Chile
Duration: 4 Dec 20177 Dec 2017

Other

Other2017 IEEE Southern Power Electronics Conference, SPEC 2017
CountryChile
CityPuerto Varas
Period4/12/177/12/17

Fingerprint

Power control
Electric potential
Reactive power
Capacitors
Controllers

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology

Cite this

Elserougi, A. A., Massoud, A. M., & Ahmed, S. (2018). Power control of grid-connected high-gain boost full-bridge modular multilevel converter. In Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017 (Vol. 2018-January, pp. 1-5). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SPEC.2017.8333655

Power control of grid-connected high-gain boost full-bridge modular multilevel converter. / Elserougi, Ahmed A.; Massoud, Ahmed M.; Ahmed, Shehab.

Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017. Vol. 2018-January Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elserougi, AA, Massoud, AM & Ahmed, S 2018, Power control of grid-connected high-gain boost full-bridge modular multilevel converter. in Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017. vol. 2018-January, Institute of Electrical and Electronics Engineers Inc., pp. 1-5, 2017 IEEE Southern Power Electronics Conference, SPEC 2017, Puerto Varas, Chile, 4/12/17. https://doi.org/10.1109/SPEC.2017.8333655
Elserougi AA, Massoud AM, Ahmed S. Power control of grid-connected high-gain boost full-bridge modular multilevel converter. In Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017. Vol. 2018-January. Institute of Electrical and Electronics Engineers Inc. 2018. p. 1-5 https://doi.org/10.1109/SPEC.2017.8333655
Elserougi, Ahmed A. ; Massoud, Ahmed M. ; Ahmed, Shehab. / Power control of grid-connected high-gain boost full-bridge modular multilevel converter. Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017. Vol. 2018-January Institute of Electrical and Electronics Engineers Inc., 2018. pp. 1-5
@inproceedings{0cc7ea00213e45379c34c82ee528a2b0,
title = "Power control of grid-connected high-gain boost full-bridge modular multilevel converter",
abstract = "Conventional Modular Multilevel Converter (MMC) with half-bridge submodules (HB-SMs) can be used for gird-integration of renewable energy sources, but with limited voltage gain. To elevate the generated ac output voltage level, a bulky low-frequency step-up transformer can be employed at the converter ac side. Alternatively, single-stage dc-ac Boost FullBridge MMC (BFB-MMC) can be used effectively. In this paper, the performance of high-gain grid-connected BFB-MMC is investigated under active and reactive power control. The BFB-MMC can generate an ac output voltage with magnitude of kVdc where k is a positive integer number, and Vdc is the input dc voltage level. Each arm in the BFB-MMC contains (2k+1) Full-bridge submodules (FB-SMs) each rated at 0.5 Vdc. Each arm is controlled to generate bipolar sinusoidal stepped voltage ranged from (0.5+k) Vdc to (0.5-k)Vdc with steps of 0.5 Vdc while keeping the sum of upper and lower arm voltages in the same leg equals the input dc voltage. A Detailed illustration for BFB-MMC operational concept, capacitor voltage balancing technique, and active and reactive power controller is presented. Finally, simulation model for the grid-connected BFB-MMC has been built. The simulation results show the effectiveness of BFB-MMC in the grid-connected applications.",
author = "Elserougi, {Ahmed A.} and Massoud, {Ahmed M.} and Shehab Ahmed",
year = "2018",
month = "4",
day = "6",
doi = "10.1109/SPEC.2017.8333655",
language = "English",
volume = "2018-January",
pages = "1--5",
booktitle = "Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Power control of grid-connected high-gain boost full-bridge modular multilevel converter

AU - Elserougi, Ahmed A.

AU - Massoud, Ahmed M.

AU - Ahmed, Shehab

PY - 2018/4/6

Y1 - 2018/4/6

N2 - Conventional Modular Multilevel Converter (MMC) with half-bridge submodules (HB-SMs) can be used for gird-integration of renewable energy sources, but with limited voltage gain. To elevate the generated ac output voltage level, a bulky low-frequency step-up transformer can be employed at the converter ac side. Alternatively, single-stage dc-ac Boost FullBridge MMC (BFB-MMC) can be used effectively. In this paper, the performance of high-gain grid-connected BFB-MMC is investigated under active and reactive power control. The BFB-MMC can generate an ac output voltage with magnitude of kVdc where k is a positive integer number, and Vdc is the input dc voltage level. Each arm in the BFB-MMC contains (2k+1) Full-bridge submodules (FB-SMs) each rated at 0.5 Vdc. Each arm is controlled to generate bipolar sinusoidal stepped voltage ranged from (0.5+k) Vdc to (0.5-k)Vdc with steps of 0.5 Vdc while keeping the sum of upper and lower arm voltages in the same leg equals the input dc voltage. A Detailed illustration for BFB-MMC operational concept, capacitor voltage balancing technique, and active and reactive power controller is presented. Finally, simulation model for the grid-connected BFB-MMC has been built. The simulation results show the effectiveness of BFB-MMC in the grid-connected applications.

AB - Conventional Modular Multilevel Converter (MMC) with half-bridge submodules (HB-SMs) can be used for gird-integration of renewable energy sources, but with limited voltage gain. To elevate the generated ac output voltage level, a bulky low-frequency step-up transformer can be employed at the converter ac side. Alternatively, single-stage dc-ac Boost FullBridge MMC (BFB-MMC) can be used effectively. In this paper, the performance of high-gain grid-connected BFB-MMC is investigated under active and reactive power control. The BFB-MMC can generate an ac output voltage with magnitude of kVdc where k is a positive integer number, and Vdc is the input dc voltage level. Each arm in the BFB-MMC contains (2k+1) Full-bridge submodules (FB-SMs) each rated at 0.5 Vdc. Each arm is controlled to generate bipolar sinusoidal stepped voltage ranged from (0.5+k) Vdc to (0.5-k)Vdc with steps of 0.5 Vdc while keeping the sum of upper and lower arm voltages in the same leg equals the input dc voltage. A Detailed illustration for BFB-MMC operational concept, capacitor voltage balancing technique, and active and reactive power controller is presented. Finally, simulation model for the grid-connected BFB-MMC has been built. The simulation results show the effectiveness of BFB-MMC in the grid-connected applications.

UR - http://www.scopus.com/inward/record.url?scp=85049224857&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85049224857&partnerID=8YFLogxK

U2 - 10.1109/SPEC.2017.8333655

DO - 10.1109/SPEC.2017.8333655

M3 - Conference contribution

AN - SCOPUS:85049224857

VL - 2018-January

SP - 1

EP - 5

BT - Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017

PB - Institute of Electrical and Electronics Engineers Inc.

ER -