Postfault operation of a nine-phase six-terminal induction machine under single open-line fault

Ahmed M. Massoud, Shehab Ahmed, Ayman Abdel-Khalik, Mostafa S. Hamad

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

This paper studies the postfault control of a nine-phase six-terminal induction machine (IM) during single open-line fault, which was recently proposed for high-power medium-voltage applications as a promising alternative to conventional six-phase IMs. The required optimal reference currents to provide prefault loading conditions under one-line open are derived using the two most common optimization criteria employed in multiphase drives, namely, maximum torque and minimum loss modes. A postfault controller, based on conventional decoupling Clarke's transformation, is then used to ensure the same controller structure under all conditions. Consequently, the machine characteristic curves, achievable torque, and stator copper losses under these different modes are compared. A comparison with a conventional asymmetrical six-phase winding is also given. A 1.5-Hp prototype IM is used for experimental verification.

Original languageEnglish
Article number2733471
Pages (from-to)1084-1096
Number of pages13
JournalIEEE Transactions on Industrial Electronics
Volume65
Issue number2
DOIs
Publication statusPublished - 1 Jan 2017

Fingerprint

Torque
Controllers
Stators
Copper
Electric potential

Keywords

  • Asymmetrical winding
  • Fault-tolerant operation
  • High-power induction machine (IM)
  • Nine-phase machine
  • Single layer winding
  • Six-phase machine

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Postfault operation of a nine-phase six-terminal induction machine under single open-line fault. / Massoud, Ahmed M.; Ahmed, Shehab; Abdel-Khalik, Ayman; Hamad, Mostafa S.

In: IEEE Transactions on Industrial Electronics, Vol. 65, No. 2, 2733471, 01.01.2017, p. 1084-1096.

Research output: Contribution to journalArticle

@article{feb1a61bddb9447b819b15f68a97909f,
title = "Postfault operation of a nine-phase six-terminal induction machine under single open-line fault",
abstract = "This paper studies the postfault control of a nine-phase six-terminal induction machine (IM) during single open-line fault, which was recently proposed for high-power medium-voltage applications as a promising alternative to conventional six-phase IMs. The required optimal reference currents to provide prefault loading conditions under one-line open are derived using the two most common optimization criteria employed in multiphase drives, namely, maximum torque and minimum loss modes. A postfault controller, based on conventional decoupling Clarke's transformation, is then used to ensure the same controller structure under all conditions. Consequently, the machine characteristic curves, achievable torque, and stator copper losses under these different modes are compared. A comparison with a conventional asymmetrical six-phase winding is also given. A 1.5-Hp prototype IM is used for experimental verification.",
keywords = "Asymmetrical winding, Fault-tolerant operation, High-power induction machine (IM), Nine-phase machine, Single layer winding, Six-phase machine",
author = "Massoud, {Ahmed M.} and Shehab Ahmed and Ayman Abdel-Khalik and Hamad, {Mostafa S.}",
year = "2017",
month = "1",
day = "1",
doi = "10.1109/TIE.2017.2733471",
language = "English",
volume = "65",
pages = "1084--1096",
journal = "IEEE Transactions on Industrial Electronics",
issn = "0278-0046",
publisher = "IEEE Industrial Electronics Society",
number = "2",

}

TY - JOUR

T1 - Postfault operation of a nine-phase six-terminal induction machine under single open-line fault

AU - Massoud, Ahmed M.

AU - Ahmed, Shehab

AU - Abdel-Khalik, Ayman

AU - Hamad, Mostafa S.

PY - 2017/1/1

Y1 - 2017/1/1

N2 - This paper studies the postfault control of a nine-phase six-terminal induction machine (IM) during single open-line fault, which was recently proposed for high-power medium-voltage applications as a promising alternative to conventional six-phase IMs. The required optimal reference currents to provide prefault loading conditions under one-line open are derived using the two most common optimization criteria employed in multiphase drives, namely, maximum torque and minimum loss modes. A postfault controller, based on conventional decoupling Clarke's transformation, is then used to ensure the same controller structure under all conditions. Consequently, the machine characteristic curves, achievable torque, and stator copper losses under these different modes are compared. A comparison with a conventional asymmetrical six-phase winding is also given. A 1.5-Hp prototype IM is used for experimental verification.

AB - This paper studies the postfault control of a nine-phase six-terminal induction machine (IM) during single open-line fault, which was recently proposed for high-power medium-voltage applications as a promising alternative to conventional six-phase IMs. The required optimal reference currents to provide prefault loading conditions under one-line open are derived using the two most common optimization criteria employed in multiphase drives, namely, maximum torque and minimum loss modes. A postfault controller, based on conventional decoupling Clarke's transformation, is then used to ensure the same controller structure under all conditions. Consequently, the machine characteristic curves, achievable torque, and stator copper losses under these different modes are compared. A comparison with a conventional asymmetrical six-phase winding is also given. A 1.5-Hp prototype IM is used for experimental verification.

KW - Asymmetrical winding

KW - Fault-tolerant operation

KW - High-power induction machine (IM)

KW - Nine-phase machine

KW - Single layer winding

KW - Six-phase machine

UR - http://www.scopus.com/inward/record.url?scp=85047359721&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85047359721&partnerID=8YFLogxK

U2 - 10.1109/TIE.2017.2733471

DO - 10.1109/TIE.2017.2733471

M3 - Article

AN - SCOPUS:85047359721

VL - 65

SP - 1084

EP - 1096

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

SN - 0278-0046

IS - 2

M1 - 2733471

ER -