Performance improvement of the delta-connected SRM driven by a standard three phase inverter

Mohammed Elamin, Yusuf Yasa, Ali Elrayyah, Yilmaz Sozer

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Asymmetric half bridge (AHB) converter provides flexibility in the control of switched reluctance machine (SRM). However, because of the non-standard structure of the AHB converter, limited volume production leads to high cost of the driving system. Delta-connected SRM with series diodes driven by three phase full-bridge inverter was proposed as an alternative by the researchers. However, the conduction angle of each phase is limited to one-Third of electrical cycle, based on the conventional control method. In this study, an improved switching method is proposed to extend the conduction angle and get higher average torque and lower torque ripple. Finite Element Analysis and circuit simulation were done to prove the concept. The results of SRM performance at different speeds regarding average torque and torque ripple was compared for SRM driven with three phase inverter using the conventional and the proposed switching methods. Finally, the results were also compared with the conventional operation of SRM with AHB converter.

Original languageEnglish
Title of host publication2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781509042814
DOIs
Publication statusPublished - 3 Aug 2017
Event2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017 - Miami, United States
Duration: 21 May 201724 May 2017

Other

Other2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017
CountryUnited States
CityMiami
Period21/5/1724/5/17

Fingerprint

Torque
Circuit simulation
Diodes
Finite element method
Costs

Keywords

  • switched reluctance motor
  • Three phase inverter
  • torque ripple

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering
  • Mechanical Engineering

Cite this

Elamin, M., Yasa, Y., Elrayyah, A., & Sozer, Y. (2017). Performance improvement of the delta-connected SRM driven by a standard three phase inverter. In 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017 [8002356] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IEMDC.2017.8002356

Performance improvement of the delta-connected SRM driven by a standard three phase inverter. / Elamin, Mohammed; Yasa, Yusuf; Elrayyah, Ali; Sozer, Yilmaz.

2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017. Institute of Electrical and Electronics Engineers Inc., 2017. 8002356.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elamin, M, Yasa, Y, Elrayyah, A & Sozer, Y 2017, Performance improvement of the delta-connected SRM driven by a standard three phase inverter. in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017., 8002356, Institute of Electrical and Electronics Engineers Inc., 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, United States, 21/5/17. https://doi.org/10.1109/IEMDC.2017.8002356
Elamin M, Yasa Y, Elrayyah A, Sozer Y. Performance improvement of the delta-connected SRM driven by a standard three phase inverter. In 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017. Institute of Electrical and Electronics Engineers Inc. 2017. 8002356 https://doi.org/10.1109/IEMDC.2017.8002356
Elamin, Mohammed ; Yasa, Yusuf ; Elrayyah, Ali ; Sozer, Yilmaz. / Performance improvement of the delta-connected SRM driven by a standard three phase inverter. 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017. Institute of Electrical and Electronics Engineers Inc., 2017.
@inproceedings{a77f66d657f144e193f978e3ab592ab8,
title = "Performance improvement of the delta-connected SRM driven by a standard three phase inverter",
abstract = "Asymmetric half bridge (AHB) converter provides flexibility in the control of switched reluctance machine (SRM). However, because of the non-standard structure of the AHB converter, limited volume production leads to high cost of the driving system. Delta-connected SRM with series diodes driven by three phase full-bridge inverter was proposed as an alternative by the researchers. However, the conduction angle of each phase is limited to one-Third of electrical cycle, based on the conventional control method. In this study, an improved switching method is proposed to extend the conduction angle and get higher average torque and lower torque ripple. Finite Element Analysis and circuit simulation were done to prove the concept. The results of SRM performance at different speeds regarding average torque and torque ripple was compared for SRM driven with three phase inverter using the conventional and the proposed switching methods. Finally, the results were also compared with the conventional operation of SRM with AHB converter.",
keywords = "switched reluctance motor, Three phase inverter, torque ripple",
author = "Mohammed Elamin and Yusuf Yasa and Ali Elrayyah and Yilmaz Sozer",
year = "2017",
month = "8",
day = "3",
doi = "10.1109/IEMDC.2017.8002356",
language = "English",
booktitle = "2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Performance improvement of the delta-connected SRM driven by a standard three phase inverter

AU - Elamin, Mohammed

AU - Yasa, Yusuf

AU - Elrayyah, Ali

AU - Sozer, Yilmaz

PY - 2017/8/3

Y1 - 2017/8/3

N2 - Asymmetric half bridge (AHB) converter provides flexibility in the control of switched reluctance machine (SRM). However, because of the non-standard structure of the AHB converter, limited volume production leads to high cost of the driving system. Delta-connected SRM with series diodes driven by three phase full-bridge inverter was proposed as an alternative by the researchers. However, the conduction angle of each phase is limited to one-Third of electrical cycle, based on the conventional control method. In this study, an improved switching method is proposed to extend the conduction angle and get higher average torque and lower torque ripple. Finite Element Analysis and circuit simulation were done to prove the concept. The results of SRM performance at different speeds regarding average torque and torque ripple was compared for SRM driven with three phase inverter using the conventional and the proposed switching methods. Finally, the results were also compared with the conventional operation of SRM with AHB converter.

AB - Asymmetric half bridge (AHB) converter provides flexibility in the control of switched reluctance machine (SRM). However, because of the non-standard structure of the AHB converter, limited volume production leads to high cost of the driving system. Delta-connected SRM with series diodes driven by three phase full-bridge inverter was proposed as an alternative by the researchers. However, the conduction angle of each phase is limited to one-Third of electrical cycle, based on the conventional control method. In this study, an improved switching method is proposed to extend the conduction angle and get higher average torque and lower torque ripple. Finite Element Analysis and circuit simulation were done to prove the concept. The results of SRM performance at different speeds regarding average torque and torque ripple was compared for SRM driven with three phase inverter using the conventional and the proposed switching methods. Finally, the results were also compared with the conventional operation of SRM with AHB converter.

KW - switched reluctance motor

KW - Three phase inverter

KW - torque ripple

UR - http://www.scopus.com/inward/record.url?scp=85030331048&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85030331048&partnerID=8YFLogxK

U2 - 10.1109/IEMDC.2017.8002356

DO - 10.1109/IEMDC.2017.8002356

M3 - Conference contribution

BT - 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017

PB - Institute of Electrical and Electronics Engineers Inc.

ER -