Parametric analysis of warm forming of aluminum blanks with FEA and DOE

Peng Chen, Zhong Qin Lin, Guan Long Chen, Muammer Koç

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict appropriate warm forming temperature conditions for deep drawing and two-dimensional stamping cases. In the investigated temperature range of 25°C-250°C, the formability of Al-5083 alloy is found to be greatly dependent on the temperature distribution of the die and punch. To achieve increased degrees of forming, different temperature levels should be assigned to the corner and body of the die and punch. And the optimal temperature distributions for warm deep drawing and warm two-dimensional stamping are not identical.

Original languageEnglish
Pages (from-to)267-273
Number of pages7
JournalTransactions of Nonferrous Metals Society of China (English Edition)
Volume16
Issue number2
DOIs
Publication statusPublished - Apr 2006
Externally publishedYes

Fingerprint

blanks
Aluminum
deep drawing
stamping
Temperature distribution
Deep drawing
temperature distribution
punches
aluminum
Stamping
Finite element method
metal sheets
experiment design
temperature
Formability
Sheet metal
Design of experiments
Temperature
analysis
metal

Keywords

  • Al-5083 alloy
  • Deep drawing
  • Finite element analysis
  • Warm forming

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Geotechnical Engineering and Engineering Geology
  • Metals and Alloys
  • Materials Chemistry

Cite this

Parametric analysis of warm forming of aluminum blanks with FEA and DOE. / Chen, Peng; Lin, Zhong Qin; Chen, Guan Long; Koç, Muammer.

In: Transactions of Nonferrous Metals Society of China (English Edition), Vol. 16, No. 2, 04.2006, p. 267-273.

Research output: Contribution to journalArticle

@article{83b74d8330494fbbbb18c13226dad006,
title = "Parametric analysis of warm forming of aluminum blanks with FEA and DOE",
abstract = "The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict appropriate warm forming temperature conditions for deep drawing and two-dimensional stamping cases. In the investigated temperature range of 25°C-250°C, the formability of Al-5083 alloy is found to be greatly dependent on the temperature distribution of the die and punch. To achieve increased degrees of forming, different temperature levels should be assigned to the corner and body of the die and punch. And the optimal temperature distributions for warm deep drawing and warm two-dimensional stamping are not identical.",
keywords = "Al-5083 alloy, Deep drawing, Finite element analysis, Warm forming",
author = "Peng Chen and Lin, {Zhong Qin} and Chen, {Guan Long} and Muammer Ko{\cc}",
year = "2006",
month = "4",
doi = "10.1016/S1003-6326(06)60045-9",
language = "English",
volume = "16",
pages = "267--273",
journal = "Transactions of Nonferrous Metals Society of China",
issn = "1003-6326",
publisher = "Nonferrous Metals Society of China",
number = "2",

}

TY - JOUR

T1 - Parametric analysis of warm forming of aluminum blanks with FEA and DOE

AU - Chen, Peng

AU - Lin, Zhong Qin

AU - Chen, Guan Long

AU - Koç, Muammer

PY - 2006/4

Y1 - 2006/4

N2 - The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict appropriate warm forming temperature conditions for deep drawing and two-dimensional stamping cases. In the investigated temperature range of 25°C-250°C, the formability of Al-5083 alloy is found to be greatly dependent on the temperature distribution of the die and punch. To achieve increased degrees of forming, different temperature levels should be assigned to the corner and body of the die and punch. And the optimal temperature distributions for warm deep drawing and warm two-dimensional stamping are not identical.

AB - The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict appropriate warm forming temperature conditions for deep drawing and two-dimensional stamping cases. In the investigated temperature range of 25°C-250°C, the formability of Al-5083 alloy is found to be greatly dependent on the temperature distribution of the die and punch. To achieve increased degrees of forming, different temperature levels should be assigned to the corner and body of the die and punch. And the optimal temperature distributions for warm deep drawing and warm two-dimensional stamping are not identical.

KW - Al-5083 alloy

KW - Deep drawing

KW - Finite element analysis

KW - Warm forming

UR - http://www.scopus.com/inward/record.url?scp=33745643593&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745643593&partnerID=8YFLogxK

U2 - 10.1016/S1003-6326(06)60045-9

DO - 10.1016/S1003-6326(06)60045-9

M3 - Article

VL - 16

SP - 267

EP - 273

JO - Transactions of Nonferrous Metals Society of China

JF - Transactions of Nonferrous Metals Society of China

SN - 1003-6326

IS - 2

ER -