Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves

Yanfeng Fan, Ibrahim Hassan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A novel passive micromixer with slanted grooves on the top and bottom of curved microchannel, denoted as CMG, is investigated numerically. The total mixing length is fixed at approximate 5.17 mm. The curved channel is applied to generate Dean vortices in the microchannel at high Reynolds numbers. The slanted grooves are used to assist to create the rotation of flow at low Reynolds numbers. The validation of present numerical simulation is done through the comparison with literatures. Three parameters, the slanted angle (θ), the grooves width angle (ω), and the height ratio of grooves (Hg/H), are selected to achieve the optimization. The tested Reynolds numbers range from 1 to 50. Compared with slanted grooved micromixer (SGM) and the curved microchannel (CM), the present micromixer has better mixing efficiency. In order to investigate the flow characteristics, a particle located at one inlet is selected and the trajectory is performed to observe the flow rotation. The rotation angle is defined to estimate the rotation strength. The results show that CMG has largest rotation angle than CM and SGM, which indicates a stronger rotation/helical motion generated in the curved channel. The mixing efficiency of present design has 60% at Re = 50 with a pressure drop of 1.8 kPa.

Original languageEnglish
Title of host publicationASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010
Pages1203-1212
Number of pages10
EditionPARTS A AND B
DOIs
Publication statusPublished - 2010
Externally publishedYes
EventASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2010 Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting - Montreal, QC
Duration: 1 Aug 20105 Aug 2010

Other

OtherASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2010 Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting
CityMontreal, QC
Period1/8/105/8/10

Fingerprint

Microchannels
Computer simulation
Reynolds number
Pressure drop
Vortex flow
Trajectories

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes

Cite this

Fan, Y., & Hassan, I. (2010). Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves. In ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010 (PARTS A AND B ed., pp. 1203-1212) https://doi.org/10.1115/FEDSM-ICNMM2010-30077

Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves. / Fan, Yanfeng; Hassan, Ibrahim.

ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B. ed. 2010. p. 1203-1212.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fan, Y & Hassan, I 2010, Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves. in ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B edn, pp. 1203-1212, ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2010 Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, Montreal, QC, 1/8/10. https://doi.org/10.1115/FEDSM-ICNMM2010-30077
Fan Y, Hassan I. Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves. In ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B ed. 2010. p. 1203-1212 https://doi.org/10.1115/FEDSM-ICNMM2010-30077
Fan, Yanfeng ; Hassan, Ibrahim. / Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves. ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B. ed. 2010. pp. 1203-1212
@inproceedings{c2be1817127a42748bfd31b12f20e833,
title = "Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves",
abstract = "A novel passive micromixer with slanted grooves on the top and bottom of curved microchannel, denoted as CMG, is investigated numerically. The total mixing length is fixed at approximate 5.17 mm. The curved channel is applied to generate Dean vortices in the microchannel at high Reynolds numbers. The slanted grooves are used to assist to create the rotation of flow at low Reynolds numbers. The validation of present numerical simulation is done through the comparison with literatures. Three parameters, the slanted angle (θ), the grooves width angle (ω), and the height ratio of grooves (Hg/H), are selected to achieve the optimization. The tested Reynolds numbers range from 1 to 50. Compared with slanted grooved micromixer (SGM) and the curved microchannel (CM), the present micromixer has better mixing efficiency. In order to investigate the flow characteristics, a particle located at one inlet is selected and the trajectory is performed to observe the flow rotation. The rotation angle is defined to estimate the rotation strength. The results show that CMG has largest rotation angle than CM and SGM, which indicates a stronger rotation/helical motion generated in the curved channel. The mixing efficiency of present design has 60{\%} at Re = 50 with a pressure drop of 1.8 kPa.",
author = "Yanfeng Fan and Ibrahim Hassan",
year = "2010",
doi = "10.1115/FEDSM-ICNMM2010-30077",
language = "English",
isbn = "9780791854501",
pages = "1203--1212",
booktitle = "ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010",
edition = "PARTS A AND B",

}

TY - GEN

T1 - Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves

AU - Fan, Yanfeng

AU - Hassan, Ibrahim

PY - 2010

Y1 - 2010

N2 - A novel passive micromixer with slanted grooves on the top and bottom of curved microchannel, denoted as CMG, is investigated numerically. The total mixing length is fixed at approximate 5.17 mm. The curved channel is applied to generate Dean vortices in the microchannel at high Reynolds numbers. The slanted grooves are used to assist to create the rotation of flow at low Reynolds numbers. The validation of present numerical simulation is done through the comparison with literatures. Three parameters, the slanted angle (θ), the grooves width angle (ω), and the height ratio of grooves (Hg/H), are selected to achieve the optimization. The tested Reynolds numbers range from 1 to 50. Compared with slanted grooved micromixer (SGM) and the curved microchannel (CM), the present micromixer has better mixing efficiency. In order to investigate the flow characteristics, a particle located at one inlet is selected and the trajectory is performed to observe the flow rotation. The rotation angle is defined to estimate the rotation strength. The results show that CMG has largest rotation angle than CM and SGM, which indicates a stronger rotation/helical motion generated in the curved channel. The mixing efficiency of present design has 60% at Re = 50 with a pressure drop of 1.8 kPa.

AB - A novel passive micromixer with slanted grooves on the top and bottom of curved microchannel, denoted as CMG, is investigated numerically. The total mixing length is fixed at approximate 5.17 mm. The curved channel is applied to generate Dean vortices in the microchannel at high Reynolds numbers. The slanted grooves are used to assist to create the rotation of flow at low Reynolds numbers. The validation of present numerical simulation is done through the comparison with literatures. Three parameters, the slanted angle (θ), the grooves width angle (ω), and the height ratio of grooves (Hg/H), are selected to achieve the optimization. The tested Reynolds numbers range from 1 to 50. Compared with slanted grooved micromixer (SGM) and the curved microchannel (CM), the present micromixer has better mixing efficiency. In order to investigate the flow characteristics, a particle located at one inlet is selected and the trajectory is performed to observe the flow rotation. The rotation angle is defined to estimate the rotation strength. The results show that CMG has largest rotation angle than CM and SGM, which indicates a stronger rotation/helical motion generated in the curved channel. The mixing efficiency of present design has 60% at Re = 50 with a pressure drop of 1.8 kPa.

UR - http://www.scopus.com/inward/record.url?scp=84856002369&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84856002369&partnerID=8YFLogxK

U2 - 10.1115/FEDSM-ICNMM2010-30077

DO - 10.1115/FEDSM-ICNMM2010-30077

M3 - Conference contribution

SN - 9780791854501

SP - 1203

EP - 1212

BT - ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010

ER -