Modified MPPT with using model predictive control for multilevel boost converter

Mostafa Mosa, Haitham Abu-Rub, Mahrous E. Ahmed, Jose Rodriguez

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

Abstract

This paper proposes a modification in the maximum power point tracking (MPPT) by using model predictive control (MPC). The modification scheme of the MPPT control is based on the perturb and observe algorithm (P&O). This modified control is implemented on the dc-dc multilevel boost converter (MLBC) to increase the response of the controller to extract the maximum power from the photovoltaic (PV) module and to boost a small dc voltage of it. The total system consisting of a PV model, a MLBC and the modified MPPT has been analyzed and then simulated with changing the solar radiation and the temperature. The proposed control scheme is implemented under program MATLAB/SIMULINK and the obtained results are validated with real time simulation using dSPACE 1103 ControlDesk. The real time simulation results have been provided for principle validation.

Original languageEnglish
Title of host publicationProceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society
Pages5080-5085
Number of pages6
DOIs
Publication statusPublished - 2012
Event38th Annual Conference on IEEE Industrial Electronics Society, IECON 2012 - Montreal, QC, Canada
Duration: 25 Oct 201228 Oct 2012

Other

Other38th Annual Conference on IEEE Industrial Electronics Society, IECON 2012
CountryCanada
CityMontreal, QC
Period25/10/1228/10/12

Fingerprint

Model predictive control
Solar radiation
MATLAB
Controllers
Electric potential
Temperature

Keywords

  • Maximum power point tracking (MPPT)
  • Model predictive control (MPC)
  • Multilevel Boost Converter (MLBC)
  • Perturb and Observe algorithm (P&O)

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Mosa, M., Abu-Rub, H., Ahmed, M. E., & Rodriguez, J. (2012). Modified MPPT with using model predictive control for multilevel boost converter. In Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society (pp. 5080-5085). [6389559] https://doi.org/10.1109/IECON.2012.6389559

Modified MPPT with using model predictive control for multilevel boost converter. / Mosa, Mostafa; Abu-Rub, Haitham; Ahmed, Mahrous E.; Rodriguez, Jose.

Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. 2012. p. 5080-5085 6389559.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mosa, M, Abu-Rub, H, Ahmed, ME & Rodriguez, J 2012, Modified MPPT with using model predictive control for multilevel boost converter. in Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society., 6389559, pp. 5080-5085, 38th Annual Conference on IEEE Industrial Electronics Society, IECON 2012, Montreal, QC, Canada, 25/10/12. https://doi.org/10.1109/IECON.2012.6389559
Mosa M, Abu-Rub H, Ahmed ME, Rodriguez J. Modified MPPT with using model predictive control for multilevel boost converter. In Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. 2012. p. 5080-5085. 6389559 https://doi.org/10.1109/IECON.2012.6389559
Mosa, Mostafa ; Abu-Rub, Haitham ; Ahmed, Mahrous E. ; Rodriguez, Jose. / Modified MPPT with using model predictive control for multilevel boost converter. Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. 2012. pp. 5080-5085
@inproceedings{79f9104445f9416ba9f90dfe06dd9c36,
title = "Modified MPPT with using model predictive control for multilevel boost converter",
abstract = "This paper proposes a modification in the maximum power point tracking (MPPT) by using model predictive control (MPC). The modification scheme of the MPPT control is based on the perturb and observe algorithm (P&O). This modified control is implemented on the dc-dc multilevel boost converter (MLBC) to increase the response of the controller to extract the maximum power from the photovoltaic (PV) module and to boost a small dc voltage of it. The total system consisting of a PV model, a MLBC and the modified MPPT has been analyzed and then simulated with changing the solar radiation and the temperature. The proposed control scheme is implemented under program MATLAB/SIMULINK and the obtained results are validated with real time simulation using dSPACE 1103 ControlDesk. The real time simulation results have been provided for principle validation.",
keywords = "Maximum power point tracking (MPPT), Model predictive control (MPC), Multilevel Boost Converter (MLBC), Perturb and Observe algorithm (P&O)",
author = "Mostafa Mosa and Haitham Abu-Rub and Ahmed, {Mahrous E.} and Jose Rodriguez",
year = "2012",
doi = "10.1109/IECON.2012.6389559",
language = "English",
isbn = "9781467324212",
pages = "5080--5085",
booktitle = "Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society",

}

TY - GEN

T1 - Modified MPPT with using model predictive control for multilevel boost converter

AU - Mosa, Mostafa

AU - Abu-Rub, Haitham

AU - Ahmed, Mahrous E.

AU - Rodriguez, Jose

PY - 2012

Y1 - 2012

N2 - This paper proposes a modification in the maximum power point tracking (MPPT) by using model predictive control (MPC). The modification scheme of the MPPT control is based on the perturb and observe algorithm (P&O). This modified control is implemented on the dc-dc multilevel boost converter (MLBC) to increase the response of the controller to extract the maximum power from the photovoltaic (PV) module and to boost a small dc voltage of it. The total system consisting of a PV model, a MLBC and the modified MPPT has been analyzed and then simulated with changing the solar radiation and the temperature. The proposed control scheme is implemented under program MATLAB/SIMULINK and the obtained results are validated with real time simulation using dSPACE 1103 ControlDesk. The real time simulation results have been provided for principle validation.

AB - This paper proposes a modification in the maximum power point tracking (MPPT) by using model predictive control (MPC). The modification scheme of the MPPT control is based on the perturb and observe algorithm (P&O). This modified control is implemented on the dc-dc multilevel boost converter (MLBC) to increase the response of the controller to extract the maximum power from the photovoltaic (PV) module and to boost a small dc voltage of it. The total system consisting of a PV model, a MLBC and the modified MPPT has been analyzed and then simulated with changing the solar radiation and the temperature. The proposed control scheme is implemented under program MATLAB/SIMULINK and the obtained results are validated with real time simulation using dSPACE 1103 ControlDesk. The real time simulation results have been provided for principle validation.

KW - Maximum power point tracking (MPPT)

KW - Model predictive control (MPC)

KW - Multilevel Boost Converter (MLBC)

KW - Perturb and Observe algorithm (P&O)

UR - http://www.scopus.com/inward/record.url?scp=84872972770&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84872972770&partnerID=8YFLogxK

U2 - 10.1109/IECON.2012.6389559

DO - 10.1109/IECON.2012.6389559

M3 - Conference contribution

SN - 9781467324212

SP - 5080

EP - 5085

BT - Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society

ER -