Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar

Bing Guo, Wasim Javed, Saadat Khan, Benjamin Figgis, Talha Mirza

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In a previous study, using field measurement data from the Qatar Foundation Solar Test Facility, the daily change in Cleanness Index (CI), a measure of PV performance ratio, corrected for temperature and normalized to a clean PV module, was correlated to environmental variables including airborne particulate matter concentration (PM10), wind speed (WS), and relative humidity (RH). A linear empirical equation between daily CI change and the daily average PM10, WS, RH was developed using Microsoft Excel®. However, the model was not extensively evaluated due to the small data set available then. In this study, a larger data set was used to fit the linear model for daily CI change and daily average values of PM10, WS, and RH. In addition, a semi-physical model was developed to take into account the non-linear mechanics of turbulent deposition, resuspension of deposited dust, and the effect of relative humidity on resuspension. The regression and solver functions of Microsoft Excel® was employed to fit the data. The R-squared values of the linear model and the semiphysical model are 0.0949 and 0.1774, respectively. The semiphysical model predicts the daily ΔCI slight more accurately than the linear model. However, for prediction of cumulative ΔCI over longer periods of time, the two models perform roughly the same. Overall, both models are able to predict the two-month ΔCI with an uncertainty of less than 16%. The results from this study suggest that it is possible to use mathematical models to calculate PV power output degradation in the Doha, Qatar area. This may be a significant step towards development of models that can be used for economic analysis of PV solar projects and plant maintenance.

Original languageEnglish
Title of host publicationBiofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies
PublisherAmerican Society of Mechanical Engineers
Volume1
ISBN (Electronic)9780791850220
DOIs
Publication statusPublished - 2016
EventASME 2016 10th International Conference on Energy Sustainability, ES 2016, collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology - Charlotte, United States
Duration: 26 Jun 201630 Jun 2016

Other

OtherASME 2016 10th International Conference on Energy Sustainability, ES 2016, collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology
CountryUnited States
CityCharlotte
Period26/6/1630/6/16

Fingerprint

Degradation
Atmospheric humidity
Economic analysis
Test facilities
Linear equations
Dust
Mechanics
Mathematical models

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Fuel Technology

Cite this

Guo, B., Javed, W., Khan, S., Figgis, B., & Mirza, T. (2016). Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar. In Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies (Vol. 1). [59390] American Society of Mechanical Engineers. https://doi.org/10.1115/ES2016-59390

Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar. / Guo, Bing; Javed, Wasim; Khan, Saadat; Figgis, Benjamin; Mirza, Talha.

Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies. Vol. 1 American Society of Mechanical Engineers, 2016. 59390.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guo, B, Javed, W, Khan, S, Figgis, B & Mirza, T 2016, Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar. in Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies. vol. 1, 59390, American Society of Mechanical Engineers, ASME 2016 10th International Conference on Energy Sustainability, ES 2016, collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology, Charlotte, United States, 26/6/16. https://doi.org/10.1115/ES2016-59390
Guo B, Javed W, Khan S, Figgis B, Mirza T. Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar. In Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies. Vol. 1. American Society of Mechanical Engineers. 2016. 59390 https://doi.org/10.1115/ES2016-59390
Guo, Bing ; Javed, Wasim ; Khan, Saadat ; Figgis, Benjamin ; Mirza, Talha. / Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar. Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies. Vol. 1 American Society of Mechanical Engineers, 2016.
@inproceedings{7b2fcdc5aa80485cb35baef869b5e43a,
title = "Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar",
abstract = "In a previous study, using field measurement data from the Qatar Foundation Solar Test Facility, the daily change in Cleanness Index (CI), a measure of PV performance ratio, corrected for temperature and normalized to a clean PV module, was correlated to environmental variables including airborne particulate matter concentration (PM10), wind speed (WS), and relative humidity (RH). A linear empirical equation between daily CI change and the daily average PM10, WS, RH was developed using Microsoft Excel{\circledR}. However, the model was not extensively evaluated due to the small data set available then. In this study, a larger data set was used to fit the linear model for daily CI change and daily average values of PM10, WS, and RH. In addition, a semi-physical model was developed to take into account the non-linear mechanics of turbulent deposition, resuspension of deposited dust, and the effect of relative humidity on resuspension. The regression and solver functions of Microsoft Excel{\circledR} was employed to fit the data. The R-squared values of the linear model and the semiphysical model are 0.0949 and 0.1774, respectively. The semiphysical model predicts the daily ΔCI slight more accurately than the linear model. However, for prediction of cumulative ΔCI over longer periods of time, the two models perform roughly the same. Overall, both models are able to predict the two-month ΔCI with an uncertainty of less than 16{\%}. The results from this study suggest that it is possible to use mathematical models to calculate PV power output degradation in the Doha, Qatar area. This may be a significant step towards development of models that can be used for economic analysis of PV solar projects and plant maintenance.",
author = "Bing Guo and Wasim Javed and Saadat Khan and Benjamin Figgis and Talha Mirza",
year = "2016",
doi = "10.1115/ES2016-59390",
language = "English",
volume = "1",
booktitle = "Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies",
publisher = "American Society of Mechanical Engineers",

}

TY - GEN

T1 - Models for prediction of soiling-caused photovoltaic power output degradation based on environmental variables in Doha, Qatar

AU - Guo, Bing

AU - Javed, Wasim

AU - Khan, Saadat

AU - Figgis, Benjamin

AU - Mirza, Talha

PY - 2016

Y1 - 2016

N2 - In a previous study, using field measurement data from the Qatar Foundation Solar Test Facility, the daily change in Cleanness Index (CI), a measure of PV performance ratio, corrected for temperature and normalized to a clean PV module, was correlated to environmental variables including airborne particulate matter concentration (PM10), wind speed (WS), and relative humidity (RH). A linear empirical equation between daily CI change and the daily average PM10, WS, RH was developed using Microsoft Excel®. However, the model was not extensively evaluated due to the small data set available then. In this study, a larger data set was used to fit the linear model for daily CI change and daily average values of PM10, WS, and RH. In addition, a semi-physical model was developed to take into account the non-linear mechanics of turbulent deposition, resuspension of deposited dust, and the effect of relative humidity on resuspension. The regression and solver functions of Microsoft Excel® was employed to fit the data. The R-squared values of the linear model and the semiphysical model are 0.0949 and 0.1774, respectively. The semiphysical model predicts the daily ΔCI slight more accurately than the linear model. However, for prediction of cumulative ΔCI over longer periods of time, the two models perform roughly the same. Overall, both models are able to predict the two-month ΔCI with an uncertainty of less than 16%. The results from this study suggest that it is possible to use mathematical models to calculate PV power output degradation in the Doha, Qatar area. This may be a significant step towards development of models that can be used for economic analysis of PV solar projects and plant maintenance.

AB - In a previous study, using field measurement data from the Qatar Foundation Solar Test Facility, the daily change in Cleanness Index (CI), a measure of PV performance ratio, corrected for temperature and normalized to a clean PV module, was correlated to environmental variables including airborne particulate matter concentration (PM10), wind speed (WS), and relative humidity (RH). A linear empirical equation between daily CI change and the daily average PM10, WS, RH was developed using Microsoft Excel®. However, the model was not extensively evaluated due to the small data set available then. In this study, a larger data set was used to fit the linear model for daily CI change and daily average values of PM10, WS, and RH. In addition, a semi-physical model was developed to take into account the non-linear mechanics of turbulent deposition, resuspension of deposited dust, and the effect of relative humidity on resuspension. The regression and solver functions of Microsoft Excel® was employed to fit the data. The R-squared values of the linear model and the semiphysical model are 0.0949 and 0.1774, respectively. The semiphysical model predicts the daily ΔCI slight more accurately than the linear model. However, for prediction of cumulative ΔCI over longer periods of time, the two models perform roughly the same. Overall, both models are able to predict the two-month ΔCI with an uncertainty of less than 16%. The results from this study suggest that it is possible to use mathematical models to calculate PV power output degradation in the Doha, Qatar area. This may be a significant step towards development of models that can be used for economic analysis of PV solar projects and plant maintenance.

UR - http://www.scopus.com/inward/record.url?scp=85002158001&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85002158001&partnerID=8YFLogxK

U2 - 10.1115/ES2016-59390

DO - 10.1115/ES2016-59390

M3 - Conference contribution

AN - SCOPUS:85002158001

VL - 1

BT - Biofuels, Hydrogen, Syngas, and Alternate Fuels; CHP and Hybrid Power and Energy Systems; Concentrating Solar Power; Energy Storage; Environmental, Economic, and Policy Considerations of Advanced Energy Systems; Geothermal, Ocean, and Emerging Energy Technologies; Photovoltaics; Posters; Solar Chemistry; Sustainable Building Energy Systems; Sustainable Infrastructure and Transportation; Thermodynamic Analysis of Energy Systems; Wind Energy Systems and Technologies

PB - American Society of Mechanical Engineers

ER -