Microstructural properties of warm mix asphalt before and after laboratory-simulated long-term ageing

Ilaria Menapace, Eyad Masad, Amit Bhasin, Dallas Little

Research output: Contribution to journalArticle

37 Citations (Scopus)

Abstract

This paper presents microstructural analysis of two original and their respective warm mix asphalt (WMA) binders, obtained with the addition of Advera® and Sasobit®. The binders were analysed before and after long-term ageing with the aid of atomic force microscopy (AFM). The AFM images highlighted the effect of ageing using rolling thin film oven (RTFO) followed by pressure ageing vessel (PAV) on the binders’ microstructure. Ageing of original binders generally increased the size of the “bee” structures. The ageing effect on the microstructure morphology of WMA binders was found to be negligible. However, ageing could affect the mechanical properties without morphology variations. The high variability inside each sample analysed makes the analysis complex. Sasobit® changed the original binders’ microstructure considerably, while Advera® did not affect it. For the original and Advera® binders, 24 hours after sample preparation, the dispersed phase expanded, and this effect was generally more pronounced for unaged than for aged binders. This could indicate a lower mobility of the species forming microstructures in aged samples. The reduced mobility of these species during heat treatment also affects the microstructure of the samples. A hypothesis on the development of “bee” structures starting from dendritic structures was proposed.

Original languageEnglish
Pages (from-to)2-20
Number of pages19
JournalRoad Materials and Pavement Design
Volume16
DOIs
Publication statusPublished - 25 May 2015

Fingerprint

Asphalt
Binders
Aging of materials
Microstructure
Atomic force microscopy
Ovens
Heat treatment
Thin films
Mechanical properties

Keywords

  • Advera<sup>®</sup>
  • ageing
  • asphalt
  • atomic force microscopy
  • Sasobit<sup>®</sup>
  • warm mix asphalt

ASJC Scopus subject areas

  • Civil and Structural Engineering

Cite this

Microstructural properties of warm mix asphalt before and after laboratory-simulated long-term ageing. / Menapace, Ilaria; Masad, Eyad; Bhasin, Amit; Little, Dallas.

In: Road Materials and Pavement Design, Vol. 16, 25.05.2015, p. 2-20.

Research output: Contribution to journalArticle

@article{6e049192cdda4abbb28ae8800a03960e,
title = "Microstructural properties of warm mix asphalt before and after laboratory-simulated long-term ageing",
abstract = "This paper presents microstructural analysis of two original and their respective warm mix asphalt (WMA) binders, obtained with the addition of Advera{\circledR} and Sasobit{\circledR}. The binders were analysed before and after long-term ageing with the aid of atomic force microscopy (AFM). The AFM images highlighted the effect of ageing using rolling thin film oven (RTFO) followed by pressure ageing vessel (PAV) on the binders’ microstructure. Ageing of original binders generally increased the size of the “bee” structures. The ageing effect on the microstructure morphology of WMA binders was found to be negligible. However, ageing could affect the mechanical properties without morphology variations. The high variability inside each sample analysed makes the analysis complex. Sasobit{\circledR} changed the original binders’ microstructure considerably, while Advera{\circledR} did not affect it. For the original and Advera{\circledR} binders, 24 hours after sample preparation, the dispersed phase expanded, and this effect was generally more pronounced for unaged than for aged binders. This could indicate a lower mobility of the species forming microstructures in aged samples. The reduced mobility of these species during heat treatment also affects the microstructure of the samples. A hypothesis on the development of “bee” structures starting from dendritic structures was proposed.",
keywords = "Advera<sup>{\circledR}</sup>, ageing, asphalt, atomic force microscopy, Sasobit<sup>{\circledR}</sup>, warm mix asphalt",
author = "Ilaria Menapace and Eyad Masad and Amit Bhasin and Dallas Little",
year = "2015",
month = "5",
day = "25",
doi = "10.1080/14680629.2015.1029692",
language = "English",
volume = "16",
pages = "2--20",
journal = "Road Materials and Pavement Design",
issn = "1468-0629",
publisher = "Taylor and Francis Ltd.",

}

TY - JOUR

T1 - Microstructural properties of warm mix asphalt before and after laboratory-simulated long-term ageing

AU - Menapace, Ilaria

AU - Masad, Eyad

AU - Bhasin, Amit

AU - Little, Dallas

PY - 2015/5/25

Y1 - 2015/5/25

N2 - This paper presents microstructural analysis of two original and their respective warm mix asphalt (WMA) binders, obtained with the addition of Advera® and Sasobit®. The binders were analysed before and after long-term ageing with the aid of atomic force microscopy (AFM). The AFM images highlighted the effect of ageing using rolling thin film oven (RTFO) followed by pressure ageing vessel (PAV) on the binders’ microstructure. Ageing of original binders generally increased the size of the “bee” structures. The ageing effect on the microstructure morphology of WMA binders was found to be negligible. However, ageing could affect the mechanical properties without morphology variations. The high variability inside each sample analysed makes the analysis complex. Sasobit® changed the original binders’ microstructure considerably, while Advera® did not affect it. For the original and Advera® binders, 24 hours after sample preparation, the dispersed phase expanded, and this effect was generally more pronounced for unaged than for aged binders. This could indicate a lower mobility of the species forming microstructures in aged samples. The reduced mobility of these species during heat treatment also affects the microstructure of the samples. A hypothesis on the development of “bee” structures starting from dendritic structures was proposed.

AB - This paper presents microstructural analysis of two original and their respective warm mix asphalt (WMA) binders, obtained with the addition of Advera® and Sasobit®. The binders were analysed before and after long-term ageing with the aid of atomic force microscopy (AFM). The AFM images highlighted the effect of ageing using rolling thin film oven (RTFO) followed by pressure ageing vessel (PAV) on the binders’ microstructure. Ageing of original binders generally increased the size of the “bee” structures. The ageing effect on the microstructure morphology of WMA binders was found to be negligible. However, ageing could affect the mechanical properties without morphology variations. The high variability inside each sample analysed makes the analysis complex. Sasobit® changed the original binders’ microstructure considerably, while Advera® did not affect it. For the original and Advera® binders, 24 hours after sample preparation, the dispersed phase expanded, and this effect was generally more pronounced for unaged than for aged binders. This could indicate a lower mobility of the species forming microstructures in aged samples. The reduced mobility of these species during heat treatment also affects the microstructure of the samples. A hypothesis on the development of “bee” structures starting from dendritic structures was proposed.

KW - Advera<sup>®</sup>

KW - ageing

KW - asphalt

KW - atomic force microscopy

KW - Sasobit<sup>®</sup>

KW - warm mix asphalt

UR - http://www.scopus.com/inward/record.url?scp=84929957705&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84929957705&partnerID=8YFLogxK

U2 - 10.1080/14680629.2015.1029692

DO - 10.1080/14680629.2015.1029692

M3 - Article

AN - SCOPUS:84929957705

VL - 16

SP - 2

EP - 20

JO - Road Materials and Pavement Design

JF - Road Materials and Pavement Design

SN - 1468-0629

ER -