Microfiltration of micro-sized suspensions of boron-selective resin with PVDF membranes

Nawaf Bin Darwish, Viktor Kochkodan, Nidal Hilal

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

In this paper microfiltration (MF) separation of fractionized ion exchange Amberlite IRA743 resin from aqueous solutions using polyvinylidene fluoride membranes with the pore sizes of 0.1, 0.22 and 0.45μm was studies. The effect of membrane pore size, transmembrane pressure, pH and concentration of the resin suspensions, presence of NaCl, MgCl2 and Na2SO4 salts on permeate flux has been evaluated. It was shown that the dominant membrane fouling mechanism during MF of the resin suspensions is formation of a cake layer from deposited resin on the membrane surface. The flux declines with increasing operating pressure and suspension concentration, while it increases with the presence of inorganic salts and feed pH. Changes in zeta potential of resin particles and the membranes as well as agglomeration and electroviscous effects should be considered while analyzing these findings. It was shown that the resin particles after boron sorption can be efficiently regenerated and reused in combined adsorption-microfiltration (AMF) process of boron removal from water, however a sharp drop in membrane flux during MF separation of the resin suspension should be further addressed to develop the efficient AMF procedure.

Original languageEnglish
JournalDesalination
DOIs
Publication statusAccepted/In press - 7 Oct 2015

Fingerprint

Boron
Microfiltration
boron
resin
Suspensions
Resins
membrane
Membranes
Fluxes
Pore size
Salts
adsorption
Adsorption
inorganic salt
Membrane fouling
Magnesium Chloride
Zeta potential
polyvinylidene fluoride
microfiltration
agglomeration

Keywords

  • Amberlite IRA743 resin
  • Boron removal
  • Microfiltration
  • PVDF membranes

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Mechanical Engineering
  • Chemistry(all)
  • Materials Science(all)
  • Water Science and Technology

Cite this

Microfiltration of micro-sized suspensions of boron-selective resin with PVDF membranes. / Darwish, Nawaf Bin; Kochkodan, Viktor; Hilal, Nidal.

In: Desalination, 07.10.2015.

Research output: Contribution to journalArticle

@article{ba15e47c2ee34e3eafd7b107bbf19482,
title = "Microfiltration of micro-sized suspensions of boron-selective resin with PVDF membranes",
abstract = "In this paper microfiltration (MF) separation of fractionized ion exchange Amberlite IRA743 resin from aqueous solutions using polyvinylidene fluoride membranes with the pore sizes of 0.1, 0.22 and 0.45μm was studies. The effect of membrane pore size, transmembrane pressure, pH and concentration of the resin suspensions, presence of NaCl, MgCl2 and Na2SO4 salts on permeate flux has been evaluated. It was shown that the dominant membrane fouling mechanism during MF of the resin suspensions is formation of a cake layer from deposited resin on the membrane surface. The flux declines with increasing operating pressure and suspension concentration, while it increases with the presence of inorganic salts and feed pH. Changes in zeta potential of resin particles and the membranes as well as agglomeration and electroviscous effects should be considered while analyzing these findings. It was shown that the resin particles after boron sorption can be efficiently regenerated and reused in combined adsorption-microfiltration (AMF) process of boron removal from water, however a sharp drop in membrane flux during MF separation of the resin suspension should be further addressed to develop the efficient AMF procedure.",
keywords = "Amberlite IRA743 resin, Boron removal, Microfiltration, PVDF membranes",
author = "Darwish, {Nawaf Bin} and Viktor Kochkodan and Nidal Hilal",
year = "2015",
month = "10",
day = "7",
doi = "10.1016/j.desal.2016.04.018",
language = "English",
journal = "Desalination",
issn = "0011-9164",
publisher = "Elsevier",

}

TY - JOUR

T1 - Microfiltration of micro-sized suspensions of boron-selective resin with PVDF membranes

AU - Darwish, Nawaf Bin

AU - Kochkodan, Viktor

AU - Hilal, Nidal

PY - 2015/10/7

Y1 - 2015/10/7

N2 - In this paper microfiltration (MF) separation of fractionized ion exchange Amberlite IRA743 resin from aqueous solutions using polyvinylidene fluoride membranes with the pore sizes of 0.1, 0.22 and 0.45μm was studies. The effect of membrane pore size, transmembrane pressure, pH and concentration of the resin suspensions, presence of NaCl, MgCl2 and Na2SO4 salts on permeate flux has been evaluated. It was shown that the dominant membrane fouling mechanism during MF of the resin suspensions is formation of a cake layer from deposited resin on the membrane surface. The flux declines with increasing operating pressure and suspension concentration, while it increases with the presence of inorganic salts and feed pH. Changes in zeta potential of resin particles and the membranes as well as agglomeration and electroviscous effects should be considered while analyzing these findings. It was shown that the resin particles after boron sorption can be efficiently regenerated and reused in combined adsorption-microfiltration (AMF) process of boron removal from water, however a sharp drop in membrane flux during MF separation of the resin suspension should be further addressed to develop the efficient AMF procedure.

AB - In this paper microfiltration (MF) separation of fractionized ion exchange Amberlite IRA743 resin from aqueous solutions using polyvinylidene fluoride membranes with the pore sizes of 0.1, 0.22 and 0.45μm was studies. The effect of membrane pore size, transmembrane pressure, pH and concentration of the resin suspensions, presence of NaCl, MgCl2 and Na2SO4 salts on permeate flux has been evaluated. It was shown that the dominant membrane fouling mechanism during MF of the resin suspensions is formation of a cake layer from deposited resin on the membrane surface. The flux declines with increasing operating pressure and suspension concentration, while it increases with the presence of inorganic salts and feed pH. Changes in zeta potential of resin particles and the membranes as well as agglomeration and electroviscous effects should be considered while analyzing these findings. It was shown that the resin particles after boron sorption can be efficiently regenerated and reused in combined adsorption-microfiltration (AMF) process of boron removal from water, however a sharp drop in membrane flux during MF separation of the resin suspension should be further addressed to develop the efficient AMF procedure.

KW - Amberlite IRA743 resin

KW - Boron removal

KW - Microfiltration

KW - PVDF membranes

UR - http://www.scopus.com/inward/record.url?scp=84964649186&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964649186&partnerID=8YFLogxK

U2 - 10.1016/j.desal.2016.04.018

DO - 10.1016/j.desal.2016.04.018

M3 - Article

JO - Desalination

JF - Desalination

SN - 0011-9164

ER -