Lipase-immobilized biocatalytic membranes for enzymatic esterification

Comparison of various approaches to membrane preparation

Nidal Hilal, Viktor Kochkodan, Rinat Nigmatullin, Vladislav Goncharuk, Laila Al-Khatib

Research output: Contribution to journalArticle

58 Citations (Scopus)

Abstract

In this paper, lipase-immobilized membranes were prepared by both non-covalent and covalent immobilization methods using (i) lipase adsorption on membranes, (ii) inclusion of enzyme in membrane structure by filtration and (iii) covalent attachment of lipase to membrane. The catalytic properties of these membranes have been studied in reaction of butyloleate synthesis through esterification of oleic acid with n-butanol in isooctane. Ultrafiltration membranes made of regenerated cellulose (C030F) and polyethersulphone (PM30) were used for lipase immobilization. It was found that the lipase inclusion in the wide porous supporting layer of membrane was the most efficient method in preparing highly effective biocatalytic membranes. The degree of oleic acid conversion using these membranes was about 70-72% with a reaction time of 8 h. It was shown that the distribution profile of the lipase in the membrane was important for the effective enzyme utilization. The profile imaging atomic force microscopy (AFM) technique was used to visualize surfaces of lipase-immobilized biocatalytic membranes. AFM has also been used to directly quantify interactions between lipase-coated tip and membrane surfaces. It was concluded that the direct measurements of the interaction force between the enzyme-coated tip and the membrane surface would be a useful and practical approach for the choice of membranes as porous polymeric support for lipase immobilization through adsorption.

Original languageEnglish
Pages (from-to)198-207
Number of pages10
JournalJournal of Membrane Science
Volume268
Issue number2
DOIs
Publication statusPublished - 15 Jan 2006
Externally publishedYes

Fingerprint

Esterification
Lipases
Lipase
membranes
Membranes
preparation
immobilization
Immobilization
enzymes
oleic acid
Enzymes
Oleic acid
Atomic Force Microscopy
Oleic Acid
Adsorption
Atomic force microscopy
atomic force microscopy
inclusions
membrane structures
Membrane structures

Keywords

  • Adhesion interaction
  • AFM
  • AFM enzyme-coated tip
  • Biocatalytic membranes
  • Butyloleate
  • Esterification
  • Immobilized lipases
  • Membrane bioreactors

ASJC Scopus subject areas

  • Filtration and Separation
  • Polymers and Plastics

Cite this

Lipase-immobilized biocatalytic membranes for enzymatic esterification : Comparison of various approaches to membrane preparation. / Hilal, Nidal; Kochkodan, Viktor; Nigmatullin, Rinat; Goncharuk, Vladislav; Al-Khatib, Laila.

In: Journal of Membrane Science, Vol. 268, No. 2, 15.01.2006, p. 198-207.

Research output: Contribution to journalArticle

Hilal, Nidal ; Kochkodan, Viktor ; Nigmatullin, Rinat ; Goncharuk, Vladislav ; Al-Khatib, Laila. / Lipase-immobilized biocatalytic membranes for enzymatic esterification : Comparison of various approaches to membrane preparation. In: Journal of Membrane Science. 2006 ; Vol. 268, No. 2. pp. 198-207.
@article{9b26004e045d48cd9c4f4959fc8f3285,
title = "Lipase-immobilized biocatalytic membranes for enzymatic esterification: Comparison of various approaches to membrane preparation",
abstract = "In this paper, lipase-immobilized membranes were prepared by both non-covalent and covalent immobilization methods using (i) lipase adsorption on membranes, (ii) inclusion of enzyme in membrane structure by filtration and (iii) covalent attachment of lipase to membrane. The catalytic properties of these membranes have been studied in reaction of butyloleate synthesis through esterification of oleic acid with n-butanol in isooctane. Ultrafiltration membranes made of regenerated cellulose (C030F) and polyethersulphone (PM30) were used for lipase immobilization. It was found that the lipase inclusion in the wide porous supporting layer of membrane was the most efficient method in preparing highly effective biocatalytic membranes. The degree of oleic acid conversion using these membranes was about 70-72{\%} with a reaction time of 8 h. It was shown that the distribution profile of the lipase in the membrane was important for the effective enzyme utilization. The profile imaging atomic force microscopy (AFM) technique was used to visualize surfaces of lipase-immobilized biocatalytic membranes. AFM has also been used to directly quantify interactions between lipase-coated tip and membrane surfaces. It was concluded that the direct measurements of the interaction force between the enzyme-coated tip and the membrane surface would be a useful and practical approach for the choice of membranes as porous polymeric support for lipase immobilization through adsorption.",
keywords = "Adhesion interaction, AFM, AFM enzyme-coated tip, Biocatalytic membranes, Butyloleate, Esterification, Immobilized lipases, Membrane bioreactors",
author = "Nidal Hilal and Viktor Kochkodan and Rinat Nigmatullin and Vladislav Goncharuk and Laila Al-Khatib",
year = "2006",
month = "1",
day = "15",
doi = "10.1016/j.memsci.2005.06.039",
language = "English",
volume = "268",
pages = "198--207",
journal = "Journal of Membrane Science",
issn = "0376-7388",
publisher = "Elsevier",
number = "2",

}

TY - JOUR

T1 - Lipase-immobilized biocatalytic membranes for enzymatic esterification

T2 - Comparison of various approaches to membrane preparation

AU - Hilal, Nidal

AU - Kochkodan, Viktor

AU - Nigmatullin, Rinat

AU - Goncharuk, Vladislav

AU - Al-Khatib, Laila

PY - 2006/1/15

Y1 - 2006/1/15

N2 - In this paper, lipase-immobilized membranes were prepared by both non-covalent and covalent immobilization methods using (i) lipase adsorption on membranes, (ii) inclusion of enzyme in membrane structure by filtration and (iii) covalent attachment of lipase to membrane. The catalytic properties of these membranes have been studied in reaction of butyloleate synthesis through esterification of oleic acid with n-butanol in isooctane. Ultrafiltration membranes made of regenerated cellulose (C030F) and polyethersulphone (PM30) were used for lipase immobilization. It was found that the lipase inclusion in the wide porous supporting layer of membrane was the most efficient method in preparing highly effective biocatalytic membranes. The degree of oleic acid conversion using these membranes was about 70-72% with a reaction time of 8 h. It was shown that the distribution profile of the lipase in the membrane was important for the effective enzyme utilization. The profile imaging atomic force microscopy (AFM) technique was used to visualize surfaces of lipase-immobilized biocatalytic membranes. AFM has also been used to directly quantify interactions between lipase-coated tip and membrane surfaces. It was concluded that the direct measurements of the interaction force between the enzyme-coated tip and the membrane surface would be a useful and practical approach for the choice of membranes as porous polymeric support for lipase immobilization through adsorption.

AB - In this paper, lipase-immobilized membranes were prepared by both non-covalent and covalent immobilization methods using (i) lipase adsorption on membranes, (ii) inclusion of enzyme in membrane structure by filtration and (iii) covalent attachment of lipase to membrane. The catalytic properties of these membranes have been studied in reaction of butyloleate synthesis through esterification of oleic acid with n-butanol in isooctane. Ultrafiltration membranes made of regenerated cellulose (C030F) and polyethersulphone (PM30) were used for lipase immobilization. It was found that the lipase inclusion in the wide porous supporting layer of membrane was the most efficient method in preparing highly effective biocatalytic membranes. The degree of oleic acid conversion using these membranes was about 70-72% with a reaction time of 8 h. It was shown that the distribution profile of the lipase in the membrane was important for the effective enzyme utilization. The profile imaging atomic force microscopy (AFM) technique was used to visualize surfaces of lipase-immobilized biocatalytic membranes. AFM has also been used to directly quantify interactions between lipase-coated tip and membrane surfaces. It was concluded that the direct measurements of the interaction force between the enzyme-coated tip and the membrane surface would be a useful and practical approach for the choice of membranes as porous polymeric support for lipase immobilization through adsorption.

KW - Adhesion interaction

KW - AFM

KW - AFM enzyme-coated tip

KW - Biocatalytic membranes

KW - Butyloleate

KW - Esterification

KW - Immobilized lipases

KW - Membrane bioreactors

UR - http://www.scopus.com/inward/record.url?scp=29244467950&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=29244467950&partnerID=8YFLogxK

U2 - 10.1016/j.memsci.2005.06.039

DO - 10.1016/j.memsci.2005.06.039

M3 - Article

VL - 268

SP - 198

EP - 207

JO - Journal of Membrane Science

JF - Journal of Membrane Science

SN - 0376-7388

IS - 2

ER -