HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing

Ahmed Elserougi, Ahmed Massoud, Ayman Abdel-Khalik, Shehab Ahmed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Conventionally, tapping-off a small amount of power from an HVDC transmission line to a three-phase local network can be achieved using a DC-to-AC voltage source converter (VSC) followed by a step down transformer. In order to obtain the high-voltage ratings required in the HVDC systems, semiconductor devices should be connected in series. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. In this paper, DC-AC multi-module VSCs (series-input parallel-output) along with an input-voltage balancing technique are employed as an alternative solution. The advantages of the proposed architecture against conventional system are also highlighted. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed voltage balancing technique.

Original languageEnglish
Title of host publication7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014
PublisherInstitution of Engineering and Technology
Volume2014
Edition628 CP
ISBN (Print)9781849198158
DOIs
Publication statusPublished - 2014
Externally publishedYes
Event7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014 - Manchester, United Kingdom
Duration: 8 Apr 201410 Apr 2014

Other

Other7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014
CountryUnited Kingdom
CityManchester
Period8/4/1410/4/14

Fingerprint

Electric potential
Semiconductor devices
Electric lines
Switches

Keywords

  • HVDC
  • Multi-module VSC
  • Tap
  • Voltage balancing

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Elserougi, A., Massoud, A., Abdel-Khalik, A., & Ahmed, S. (2014). HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing. In 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014 (628 CP ed., Vol. 2014). Institution of Engineering and Technology. https://doi.org/10.1049/cp.2014.0377

HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing. / Elserougi, Ahmed; Massoud, Ahmed; Abdel-Khalik, Ayman; Ahmed, Shehab.

7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014. Vol. 2014 628 CP. ed. Institution of Engineering and Technology, 2014.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elserougi, A, Massoud, A, Abdel-Khalik, A & Ahmed, S 2014, HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing. in 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014. 628 CP edn, vol. 2014, Institution of Engineering and Technology, 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014, Manchester, United Kingdom, 8/4/14. https://doi.org/10.1049/cp.2014.0377
Elserougi A, Massoud A, Abdel-Khalik A, Ahmed S. HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing. In 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014. 628 CP ed. Vol. 2014. Institution of Engineering and Technology. 2014 https://doi.org/10.1049/cp.2014.0377
Elserougi, Ahmed ; Massoud, Ahmed ; Abdel-Khalik, Ayman ; Ahmed, Shehab. / HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing. 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014. Vol. 2014 628 CP. ed. Institution of Engineering and Technology, 2014.
@inproceedings{d985a91d161c40ac998f907ea361bfb4,
title = "HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing",
abstract = "Conventionally, tapping-off a small amount of power from an HVDC transmission line to a three-phase local network can be achieved using a DC-to-AC voltage source converter (VSC) followed by a step down transformer. In order to obtain the high-voltage ratings required in the HVDC systems, semiconductor devices should be connected in series. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. In this paper, DC-AC multi-module VSCs (series-input parallel-output) along with an input-voltage balancing technique are employed as an alternative solution. The advantages of the proposed architecture against conventional system are also highlighted. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed voltage balancing technique.",
keywords = "HVDC, Multi-module VSC, Tap, Voltage balancing",
author = "Ahmed Elserougi and Ahmed Massoud and Ayman Abdel-Khalik and Shehab Ahmed",
year = "2014",
doi = "10.1049/cp.2014.0377",
language = "English",
isbn = "9781849198158",
volume = "2014",
booktitle = "7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014",
publisher = "Institution of Engineering and Technology",
address = "United Kingdom",
edition = "628 CP",

}

TY - GEN

T1 - HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing

AU - Elserougi, Ahmed

AU - Massoud, Ahmed

AU - Abdel-Khalik, Ayman

AU - Ahmed, Shehab

PY - 2014

Y1 - 2014

N2 - Conventionally, tapping-off a small amount of power from an HVDC transmission line to a three-phase local network can be achieved using a DC-to-AC voltage source converter (VSC) followed by a step down transformer. In order to obtain the high-voltage ratings required in the HVDC systems, semiconductor devices should be connected in series. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. In this paper, DC-AC multi-module VSCs (series-input parallel-output) along with an input-voltage balancing technique are employed as an alternative solution. The advantages of the proposed architecture against conventional system are also highlighted. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed voltage balancing technique.

AB - Conventionally, tapping-off a small amount of power from an HVDC transmission line to a three-phase local network can be achieved using a DC-to-AC voltage source converter (VSC) followed by a step down transformer. In order to obtain the high-voltage ratings required in the HVDC systems, semiconductor devices should be connected in series. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. In this paper, DC-AC multi-module VSCs (series-input parallel-output) along with an input-voltage balancing technique are employed as an alternative solution. The advantages of the proposed architecture against conventional system are also highlighted. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed voltage balancing technique.

KW - HVDC

KW - Multi-module VSC

KW - Tap

KW - Voltage balancing

UR - http://www.scopus.com/inward/record.url?scp=84901841047&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901841047&partnerID=8YFLogxK

U2 - 10.1049/cp.2014.0377

DO - 10.1049/cp.2014.0377

M3 - Conference contribution

SN - 9781849198158

VL - 2014

BT - 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014

PB - Institution of Engineering and Technology

ER -