General Multi-Porosity simulation for fractured reservoir modeling

Bicheng Yan, Masoud Alfi, Cheng An, Yang Cao, Yuhe Wang, John E. Killough

Research output: Contribution to journalArticle

28 Citations (Scopus)

Abstract

In the area of fractured reservoir modeling, conventional Dual Porosity Models is challenged to flexibly simulate more than two porosity systems and it is also difficult to capture the transient fluid transfer between matrix and fracture. This work aims to solve those problems in fractured reservoir simulation. The newly introduced Multi-Porosity Model honors any number of porosity types with different properties, such as permeability, porosity and wettability thus achieving significant improvements over conventional Dual-Porosity Models. Arbitrary connections for intra-porosity flow and inter-porosity flow are incorporated into the design to allow for the convenient transformation between Multi-Porosity and Multi-Permeability formulations. The addition of a flexible subdivision in each porosity system has allowed us to characterize the transient flow for inter-porosity flow. Due to the low permeability in the matrix, transient flow between matrix and fracture dominates, and thus matrix spatial subdivision is necessary to accurately capture the dynamics. The formulation is designed to allow the proposed scheme to be generalized. To quantify the improvements available with the new formulation, several typical Multi-Porosity Models are compared with Fine-Grid Single-Porosity Models. Consistent results have been obtained with those similar cases from literature, and the robustness and efficiency of the model is validated. Besides, the extra matrix subdivision is proven to accurately capture the transient fluid transfer between matrix and fracture.

Original languageEnglish
Pages (from-to)777-791
Number of pages15
JournalJournal of Natural Gas Science and Engineering
Volume33
DOIs
Publication statusPublished - 1 Jul 2016

Fingerprint

Porosity
Fluids
Wetting

Keywords

  • Arbitrary connection
  • Fractured reservoirs
  • Multi-Porosity Model
  • Porosity subdivision
  • Transient flow

ASJC Scopus subject areas

  • Energy Engineering and Power Technology

Cite this

General Multi-Porosity simulation for fractured reservoir modeling. / Yan, Bicheng; Alfi, Masoud; An, Cheng; Cao, Yang; Wang, Yuhe; Killough, John E.

In: Journal of Natural Gas Science and Engineering, Vol. 33, 01.07.2016, p. 777-791.

Research output: Contribution to journalArticle

Yan, Bicheng ; Alfi, Masoud ; An, Cheng ; Cao, Yang ; Wang, Yuhe ; Killough, John E. / General Multi-Porosity simulation for fractured reservoir modeling. In: Journal of Natural Gas Science and Engineering. 2016 ; Vol. 33. pp. 777-791.
@article{385f761e8fbd473c91dab72b5fa3f917,
title = "General Multi-Porosity simulation for fractured reservoir modeling",
abstract = "In the area of fractured reservoir modeling, conventional Dual Porosity Models is challenged to flexibly simulate more than two porosity systems and it is also difficult to capture the transient fluid transfer between matrix and fracture. This work aims to solve those problems in fractured reservoir simulation. The newly introduced Multi-Porosity Model honors any number of porosity types with different properties, such as permeability, porosity and wettability thus achieving significant improvements over conventional Dual-Porosity Models. Arbitrary connections for intra-porosity flow and inter-porosity flow are incorporated into the design to allow for the convenient transformation between Multi-Porosity and Multi-Permeability formulations. The addition of a flexible subdivision in each porosity system has allowed us to characterize the transient flow for inter-porosity flow. Due to the low permeability in the matrix, transient flow between matrix and fracture dominates, and thus matrix spatial subdivision is necessary to accurately capture the dynamics. The formulation is designed to allow the proposed scheme to be generalized. To quantify the improvements available with the new formulation, several typical Multi-Porosity Models are compared with Fine-Grid Single-Porosity Models. Consistent results have been obtained with those similar cases from literature, and the robustness and efficiency of the model is validated. Besides, the extra matrix subdivision is proven to accurately capture the transient fluid transfer between matrix and fracture.",
keywords = "Arbitrary connection, Fractured reservoirs, Multi-Porosity Model, Porosity subdivision, Transient flow",
author = "Bicheng Yan and Masoud Alfi and Cheng An and Yang Cao and Yuhe Wang and Killough, {John E.}",
year = "2016",
month = "7",
day = "1",
doi = "10.1016/j.jngse.2016.06.016",
language = "English",
volume = "33",
pages = "777--791",
journal = "Journal of Natural Gas Science and Engineering",
issn = "1875-5100",
publisher = "Elsevier",

}

TY - JOUR

T1 - General Multi-Porosity simulation for fractured reservoir modeling

AU - Yan, Bicheng

AU - Alfi, Masoud

AU - An, Cheng

AU - Cao, Yang

AU - Wang, Yuhe

AU - Killough, John E.

PY - 2016/7/1

Y1 - 2016/7/1

N2 - In the area of fractured reservoir modeling, conventional Dual Porosity Models is challenged to flexibly simulate more than two porosity systems and it is also difficult to capture the transient fluid transfer between matrix and fracture. This work aims to solve those problems in fractured reservoir simulation. The newly introduced Multi-Porosity Model honors any number of porosity types with different properties, such as permeability, porosity and wettability thus achieving significant improvements over conventional Dual-Porosity Models. Arbitrary connections for intra-porosity flow and inter-porosity flow are incorporated into the design to allow for the convenient transformation between Multi-Porosity and Multi-Permeability formulations. The addition of a flexible subdivision in each porosity system has allowed us to characterize the transient flow for inter-porosity flow. Due to the low permeability in the matrix, transient flow between matrix and fracture dominates, and thus matrix spatial subdivision is necessary to accurately capture the dynamics. The formulation is designed to allow the proposed scheme to be generalized. To quantify the improvements available with the new formulation, several typical Multi-Porosity Models are compared with Fine-Grid Single-Porosity Models. Consistent results have been obtained with those similar cases from literature, and the robustness and efficiency of the model is validated. Besides, the extra matrix subdivision is proven to accurately capture the transient fluid transfer between matrix and fracture.

AB - In the area of fractured reservoir modeling, conventional Dual Porosity Models is challenged to flexibly simulate more than two porosity systems and it is also difficult to capture the transient fluid transfer between matrix and fracture. This work aims to solve those problems in fractured reservoir simulation. The newly introduced Multi-Porosity Model honors any number of porosity types with different properties, such as permeability, porosity and wettability thus achieving significant improvements over conventional Dual-Porosity Models. Arbitrary connections for intra-porosity flow and inter-porosity flow are incorporated into the design to allow for the convenient transformation between Multi-Porosity and Multi-Permeability formulations. The addition of a flexible subdivision in each porosity system has allowed us to characterize the transient flow for inter-porosity flow. Due to the low permeability in the matrix, transient flow between matrix and fracture dominates, and thus matrix spatial subdivision is necessary to accurately capture the dynamics. The formulation is designed to allow the proposed scheme to be generalized. To quantify the improvements available with the new formulation, several typical Multi-Porosity Models are compared with Fine-Grid Single-Porosity Models. Consistent results have been obtained with those similar cases from literature, and the robustness and efficiency of the model is validated. Besides, the extra matrix subdivision is proven to accurately capture the transient fluid transfer between matrix and fracture.

KW - Arbitrary connection

KW - Fractured reservoirs

KW - Multi-Porosity Model

KW - Porosity subdivision

KW - Transient flow

UR - http://www.scopus.com/inward/record.url?scp=84974559398&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84974559398&partnerID=8YFLogxK

U2 - 10.1016/j.jngse.2016.06.016

DO - 10.1016/j.jngse.2016.06.016

M3 - Article

AN - SCOPUS:84974559398

VL - 33

SP - 777

EP - 791

JO - Journal of Natural Gas Science and Engineering

JF - Journal of Natural Gas Science and Engineering

SN - 1875-5100

ER -