Gas pressure profile prediction from variable strain rate deformation paths in AA5083 bulge forming

F. S. Jarrar, L. G. Hector, Marwan Khraisheh, K. Deshpande

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

Two approaches to gas pressure profile prediction for bulge forming of AA5083 sheet under Quick Plastic Forming (QPF) conditions at 450 °C were investigated. The first was based on an algorithm internal to ABAQUS™ wherein the gas pressure results from maintaining a constant effective target strain rate at the dome pole. In the second, the nonlinear long wavelength stability analysis was combined with a single creep mechanism material model that accounts for hardening/softening. A series of stability curves, which denote combinations of strain and strain rate for unmitigated thinning and, ultimately, rupture of an AA5083 bar, were computed. These are based on a parameter that characterizes an assumed geometric non-uniformity, η. The associated uniaxial strains and strain rates were expressed in terms of von Mises effective strains and strains rates, and pressure profiles were computed. An ancillary approach to variable strain rate path prediction based on a thinning factor was used to suggest a suitable value of η in the stability analysis for a reasonable thinning level at the end of forming. Key advantages and disadvantages of both approaches to pressure profile prediction are examined relative to bulge forming time and thinning at a 50-mm dome displacement.

Original languageEnglish
Pages (from-to)2263-2273
Number of pages11
JournalJournal of Materials Engineering and Performance
Volume21
Issue number11
DOIs
Publication statusPublished - 1 Nov 2012
Externally publishedYes

Fingerprint

Strain rate
Gases
Domes
Plastics forming
ABAQUS
Hardening
Poles
Creep
Wavelength

Keywords

  • Deformation stability
  • Finite element simulation
  • Quick plastic forming
  • Superplastic forming

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Gas pressure profile prediction from variable strain rate deformation paths in AA5083 bulge forming. / Jarrar, F. S.; Hector, L. G.; Khraisheh, Marwan; Deshpande, K.

In: Journal of Materials Engineering and Performance, Vol. 21, No. 11, 01.11.2012, p. 2263-2273.

Research output: Contribution to journalArticle

@article{a990dfa7413b41a79bb888c451ebdcb7,
title = "Gas pressure profile prediction from variable strain rate deformation paths in AA5083 bulge forming",
abstract = "Two approaches to gas pressure profile prediction for bulge forming of AA5083 sheet under Quick Plastic Forming (QPF) conditions at 450 °C were investigated. The first was based on an algorithm internal to ABAQUS™ wherein the gas pressure results from maintaining a constant effective target strain rate at the dome pole. In the second, the nonlinear long wavelength stability analysis was combined with a single creep mechanism material model that accounts for hardening/softening. A series of stability curves, which denote combinations of strain and strain rate for unmitigated thinning and, ultimately, rupture of an AA5083 bar, were computed. These are based on a parameter that characterizes an assumed geometric non-uniformity, η. The associated uniaxial strains and strain rates were expressed in terms of von Mises effective strains and strains rates, and pressure profiles were computed. An ancillary approach to variable strain rate path prediction based on a thinning factor was used to suggest a suitable value of η in the stability analysis for a reasonable thinning level at the end of forming. Key advantages and disadvantages of both approaches to pressure profile prediction are examined relative to bulge forming time and thinning at a 50-mm dome displacement.",
keywords = "Deformation stability, Finite element simulation, Quick plastic forming, Superplastic forming",
author = "Jarrar, {F. S.} and Hector, {L. G.} and Marwan Khraisheh and K. Deshpande",
year = "2012",
month = "11",
day = "1",
doi = "10.1007/s11665-012-0196-1",
language = "English",
volume = "21",
pages = "2263--2273",
journal = "Journal of Materials Engineering and Performance",
issn = "1059-9495",
publisher = "Springer New York",
number = "11",

}

TY - JOUR

T1 - Gas pressure profile prediction from variable strain rate deformation paths in AA5083 bulge forming

AU - Jarrar, F. S.

AU - Hector, L. G.

AU - Khraisheh, Marwan

AU - Deshpande, K.

PY - 2012/11/1

Y1 - 2012/11/1

N2 - Two approaches to gas pressure profile prediction for bulge forming of AA5083 sheet under Quick Plastic Forming (QPF) conditions at 450 °C were investigated. The first was based on an algorithm internal to ABAQUS™ wherein the gas pressure results from maintaining a constant effective target strain rate at the dome pole. In the second, the nonlinear long wavelength stability analysis was combined with a single creep mechanism material model that accounts for hardening/softening. A series of stability curves, which denote combinations of strain and strain rate for unmitigated thinning and, ultimately, rupture of an AA5083 bar, were computed. These are based on a parameter that characterizes an assumed geometric non-uniformity, η. The associated uniaxial strains and strain rates were expressed in terms of von Mises effective strains and strains rates, and pressure profiles were computed. An ancillary approach to variable strain rate path prediction based on a thinning factor was used to suggest a suitable value of η in the stability analysis for a reasonable thinning level at the end of forming. Key advantages and disadvantages of both approaches to pressure profile prediction are examined relative to bulge forming time and thinning at a 50-mm dome displacement.

AB - Two approaches to gas pressure profile prediction for bulge forming of AA5083 sheet under Quick Plastic Forming (QPF) conditions at 450 °C were investigated. The first was based on an algorithm internal to ABAQUS™ wherein the gas pressure results from maintaining a constant effective target strain rate at the dome pole. In the second, the nonlinear long wavelength stability analysis was combined with a single creep mechanism material model that accounts for hardening/softening. A series of stability curves, which denote combinations of strain and strain rate for unmitigated thinning and, ultimately, rupture of an AA5083 bar, were computed. These are based on a parameter that characterizes an assumed geometric non-uniformity, η. The associated uniaxial strains and strain rates were expressed in terms of von Mises effective strains and strains rates, and pressure profiles were computed. An ancillary approach to variable strain rate path prediction based on a thinning factor was used to suggest a suitable value of η in the stability analysis for a reasonable thinning level at the end of forming. Key advantages and disadvantages of both approaches to pressure profile prediction are examined relative to bulge forming time and thinning at a 50-mm dome displacement.

KW - Deformation stability

KW - Finite element simulation

KW - Quick plastic forming

KW - Superplastic forming

UR - http://www.scopus.com/inward/record.url?scp=84869880664&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84869880664&partnerID=8YFLogxK

U2 - 10.1007/s11665-012-0196-1

DO - 10.1007/s11665-012-0196-1

M3 - Article

AN - SCOPUS:84869880664

VL - 21

SP - 2263

EP - 2273

JO - Journal of Materials Engineering and Performance

JF - Journal of Materials Engineering and Performance

SN - 1059-9495

IS - 11

ER -