Frictional receding contact problem for a graded bilayer system indented by a rigid punch

K. B. Yilmaz, I. Comez, B. Yildirim, M. A. Güler, Sami El-Borgi

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

The frictional receding contact problem for two graded layers pressed by a rigid punch is considered in this paper. The punch is subjected to both normal and tangential loads thereby resulting in frictional contact with the upper layer. It is also assumed that the contact between the layers is frictional and the lower layer is fixed. It is further assumed that the gradation in the layers follows an exponential variation through the thickness with different profiles while Poissons ratios are taken as constants. Using standard Fourier transform, the contact problem is converted to a system of two singular integral equations in which the contact pressures and the contact widths are the unknowns. The integral equations are then solved numerically using Gauss–Jacobi integration formula. The Finite Element Method was additionally employed and both exponential and power law material gradation is used to solve the investigated problem and the obtained numerical and analytical results are in good agreement. The primary intention of this paper is to investigate the effect of material gradation, friction coefficients, layers thicknesses and material property mismatch at the interface between the layers on the contact pressures and contact widths.

Original languageEnglish
Pages (from-to)127-142
Number of pages16
JournalInternational Journal of Mechanical Sciences
Volume141
DOIs
Publication statusPublished - 1 Jun 2018

Fingerprint

punches
Integral equations
Friction materials
Poisson ratio
Materials properties
Fourier transforms
Finite element method
singular integral equations
coefficient of friction
integral equations
finite element method
profiles

Keywords

  • FGM
  • Finite Element Method
  • Friction
  • Singular integral equations
  • Sliding contact

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Frictional receding contact problem for a graded bilayer system indented by a rigid punch. / Yilmaz, K. B.; Comez, I.; Yildirim, B.; Güler, M. A.; El-Borgi, Sami.

In: International Journal of Mechanical Sciences, Vol. 141, 01.06.2018, p. 127-142.

Research output: Contribution to journalArticle

@article{83d93811e82749fdbe4ee70c5b47d012,
title = "Frictional receding contact problem for a graded bilayer system indented by a rigid punch",
abstract = "The frictional receding contact problem for two graded layers pressed by a rigid punch is considered in this paper. The punch is subjected to both normal and tangential loads thereby resulting in frictional contact with the upper layer. It is also assumed that the contact between the layers is frictional and the lower layer is fixed. It is further assumed that the gradation in the layers follows an exponential variation through the thickness with different profiles while Poissons ratios are taken as constants. Using standard Fourier transform, the contact problem is converted to a system of two singular integral equations in which the contact pressures and the contact widths are the unknowns. The integral equations are then solved numerically using Gauss–Jacobi integration formula. The Finite Element Method was additionally employed and both exponential and power law material gradation is used to solve the investigated problem and the obtained numerical and analytical results are in good agreement. The primary intention of this paper is to investigate the effect of material gradation, friction coefficients, layers thicknesses and material property mismatch at the interface between the layers on the contact pressures and contact widths.",
keywords = "FGM, Finite Element Method, Friction, Singular integral equations, Sliding contact",
author = "Yilmaz, {K. B.} and I. Comez and B. Yildirim and G{\"u}ler, {M. A.} and Sami El-Borgi",
year = "2018",
month = "6",
day = "1",
doi = "10.1016/j.ijmecsci.2018.03.041",
language = "English",
volume = "141",
pages = "127--142",
journal = "International Journal of Mechanical Sciences",
issn = "0020-7403",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Frictional receding contact problem for a graded bilayer system indented by a rigid punch

AU - Yilmaz, K. B.

AU - Comez, I.

AU - Yildirim, B.

AU - Güler, M. A.

AU - El-Borgi, Sami

PY - 2018/6/1

Y1 - 2018/6/1

N2 - The frictional receding contact problem for two graded layers pressed by a rigid punch is considered in this paper. The punch is subjected to both normal and tangential loads thereby resulting in frictional contact with the upper layer. It is also assumed that the contact between the layers is frictional and the lower layer is fixed. It is further assumed that the gradation in the layers follows an exponential variation through the thickness with different profiles while Poissons ratios are taken as constants. Using standard Fourier transform, the contact problem is converted to a system of two singular integral equations in which the contact pressures and the contact widths are the unknowns. The integral equations are then solved numerically using Gauss–Jacobi integration formula. The Finite Element Method was additionally employed and both exponential and power law material gradation is used to solve the investigated problem and the obtained numerical and analytical results are in good agreement. The primary intention of this paper is to investigate the effect of material gradation, friction coefficients, layers thicknesses and material property mismatch at the interface between the layers on the contact pressures and contact widths.

AB - The frictional receding contact problem for two graded layers pressed by a rigid punch is considered in this paper. The punch is subjected to both normal and tangential loads thereby resulting in frictional contact with the upper layer. It is also assumed that the contact between the layers is frictional and the lower layer is fixed. It is further assumed that the gradation in the layers follows an exponential variation through the thickness with different profiles while Poissons ratios are taken as constants. Using standard Fourier transform, the contact problem is converted to a system of two singular integral equations in which the contact pressures and the contact widths are the unknowns. The integral equations are then solved numerically using Gauss–Jacobi integration formula. The Finite Element Method was additionally employed and both exponential and power law material gradation is used to solve the investigated problem and the obtained numerical and analytical results are in good agreement. The primary intention of this paper is to investigate the effect of material gradation, friction coefficients, layers thicknesses and material property mismatch at the interface between the layers on the contact pressures and contact widths.

KW - FGM

KW - Finite Element Method

KW - Friction

KW - Singular integral equations

KW - Sliding contact

UR - http://www.scopus.com/inward/record.url?scp=85045274624&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85045274624&partnerID=8YFLogxK

U2 - 10.1016/j.ijmecsci.2018.03.041

DO - 10.1016/j.ijmecsci.2018.03.041

M3 - Article

AN - SCOPUS:85045274624

VL - 141

SP - 127

EP - 142

JO - International Journal of Mechanical Sciences

JF - International Journal of Mechanical Sciences

SN - 0020-7403

ER -