Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS)

Ömer Necati Cora, Muammer Koç

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Newer sheet alloys (such as Al, Mg, and advanced high strength steels) are considered for automotive body panels and structural parts to achieve lightweight construction. However, in addition to issues with their limited formability and high springback, tribological conditions due to increased surface hardness and higher work hardening effect necessitate the use of improved alternative die materials, coatings, lubricants to minimize the wear-related issues in stamping of such lightweight materials. This study aims to investigate and compare the wear performances of seven (7) different die materials (AISI D2, Vanadis 4, Vancron 40, K340 ISODUR, Caldie, Carmo, 0050A) using a newly developed wear testing method and device. We used DP600 sheets in the tests. Our results showed that almost all of the recently developed specially-alloyed die materials demonstrated higher wear resistance performance when compared with the performance of AISI D2 die material.

Original languageEnglish
Title of host publicationProceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008
Pages185-192
Number of pages8
Volume2
DOIs
Publication statusPublished - 2009
Externally publishedYes
EventASME International Manufacturing Science and Engineering Conference, MSEC2008 - Evanston, IL, United States
Duration: 7 Oct 200810 Oct 2008

Other

OtherASME International Manufacturing Science and Engineering Conference, MSEC2008
CountryUnited States
CityEvanston, IL
Period7/10/0810/10/08

Fingerprint

Stamping
High strength steel
Wear resistance
Wear of materials
Formability
Strain hardening
Lubricants
Hardness
Coatings
Testing

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Cora, Ö. N., & Koç, M. (2009). Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS). In Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008 (Vol. 2, pp. 185-192) https://doi.org/10.1115/MSEC_ICMP2008-72027

Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS). / Cora, Ömer Necati; Koç, Muammer.

Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. Vol. 2 2009. p. 185-192.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cora, ÖN & Koç, M 2009, Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS). in Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. vol. 2, pp. 185-192, ASME International Manufacturing Science and Engineering Conference, MSEC2008, Evanston, IL, United States, 7/10/08. https://doi.org/10.1115/MSEC_ICMP2008-72027
Cora ÖN, Koç M. Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS). In Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. Vol. 2. 2009. p. 185-192 https://doi.org/10.1115/MSEC_ICMP2008-72027
Cora, Ömer Necati ; Koç, Muammer. / Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS). Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. Vol. 2 2009. pp. 185-192
@inproceedings{2d1954c64d4c4b40ab0b51f4e01e6c78,
title = "Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS)",
abstract = "Newer sheet alloys (such as Al, Mg, and advanced high strength steels) are considered for automotive body panels and structural parts to achieve lightweight construction. However, in addition to issues with their limited formability and high springback, tribological conditions due to increased surface hardness and higher work hardening effect necessitate the use of improved alternative die materials, coatings, lubricants to minimize the wear-related issues in stamping of such lightweight materials. This study aims to investigate and compare the wear performances of seven (7) different die materials (AISI D2, Vanadis 4, Vancron 40, K340 ISODUR, Caldie, Carmo, 0050A) using a newly developed wear testing method and device. We used DP600 sheets in the tests. Our results showed that almost all of the recently developed specially-alloyed die materials demonstrated higher wear resistance performance when compared with the performance of AISI D2 die material.",
author = "Cora, {{\"O}mer Necati} and Muammer Ko{\cc}",
year = "2009",
doi = "10.1115/MSEC_ICMP2008-72027",
language = "English",
isbn = "9780791848517",
volume = "2",
pages = "185--192",
booktitle = "Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008",

}

TY - GEN

T1 - Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS)

AU - Cora, Ömer Necati

AU - Koç, Muammer

PY - 2009

Y1 - 2009

N2 - Newer sheet alloys (such as Al, Mg, and advanced high strength steels) are considered for automotive body panels and structural parts to achieve lightweight construction. However, in addition to issues with their limited formability and high springback, tribological conditions due to increased surface hardness and higher work hardening effect necessitate the use of improved alternative die materials, coatings, lubricants to minimize the wear-related issues in stamping of such lightweight materials. This study aims to investigate and compare the wear performances of seven (7) different die materials (AISI D2, Vanadis 4, Vancron 40, K340 ISODUR, Caldie, Carmo, 0050A) using a newly developed wear testing method and device. We used DP600 sheets in the tests. Our results showed that almost all of the recently developed specially-alloyed die materials demonstrated higher wear resistance performance when compared with the performance of AISI D2 die material.

AB - Newer sheet alloys (such as Al, Mg, and advanced high strength steels) are considered for automotive body panels and structural parts to achieve lightweight construction. However, in addition to issues with their limited formability and high springback, tribological conditions due to increased surface hardness and higher work hardening effect necessitate the use of improved alternative die materials, coatings, lubricants to minimize the wear-related issues in stamping of such lightweight materials. This study aims to investigate and compare the wear performances of seven (7) different die materials (AISI D2, Vanadis 4, Vancron 40, K340 ISODUR, Caldie, Carmo, 0050A) using a newly developed wear testing method and device. We used DP600 sheets in the tests. Our results showed that almost all of the recently developed specially-alloyed die materials demonstrated higher wear resistance performance when compared with the performance of AISI D2 die material.

UR - http://www.scopus.com/inward/record.url?scp=77951570684&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951570684&partnerID=8YFLogxK

U2 - 10.1115/MSEC_ICMP2008-72027

DO - 10.1115/MSEC_ICMP2008-72027

M3 - Conference contribution

AN - SCOPUS:77951570684

SN - 9780791848517

VL - 2

SP - 185

EP - 192

BT - Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008

ER -