Experimental and numerical investigations of bubble dynamics in porous and non-porous media

Azizur Rahaman, S. Butt, J. M. Alam, M. Shahwan, M. Hunt, S. Imtiaz

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In this study an experimental work is conducted to investigate the shape and speed of an air bubble in a pipe filled with different viscous fluids and porous media. The experimental results are also compared with the Computational Fluid Dynamics (CFD) simulation. Multiphase flows are complex due to the infinitely deformable nature of interface in gas/liquid flows. If one of the phases is gas acts as dispersed phase in the form of bubble, then the complexity will arise from the nonuniform distribution of bubbles in the pipe cross-section and axial distance. Inclusion of different viscous fluids simulating the industrial scale hydrocarbon properties brings added challenge in understating the bubble rise, coalescence and breakup dynamics. Moreover, bubble rise and change of shape of bubble in porous media will bring additional complexity in the flow dynamics. The pipe used in the experiment and CFD was 11.6 cm ID and a length of 100 cm. Three situations were tested: i) an air bubble rising in stagnant water, ii) an air bubble rising in moving water, and iii) an air bubble rising in a stagnant water but filled with porous media with porosity of 27%. Preliminary CFD results indicate that an air bubble has an average velocity of 0.2468 m/s and 0.2524 m/s in stagnant water and moving water, respectively, which is very close to experimental results.

Original languageEnglish
Title of host publicationPetroleum Technology
PublisherAmerican Society of Mechanical Engineers (ASME)
Volume10
ISBN (Electronic)9780791856581
DOIs
Publication statusPublished - 2015
Externally publishedYes
EventASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2015 - St. John's, Canada
Duration: 31 May 20155 Jun 2015

Other

OtherASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2015
CountryCanada
CitySt. John's
Period31/5/155/6/15

Fingerprint

Porous materials
Air
Computational fluid dynamics
Pipe
Water
Fluids
Multiphase flow
Coalescence
Gases
Porosity
Hydrocarbons
Computer simulation
Liquids
Experiments

Keywords

  • Bubble Rise
  • CFD
  • Experimental
  • Porous Media
  • Surface Tension
  • Two phase flow
  • Viscosity

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Ocean Engineering
  • Mechanical Engineering

Cite this

Rahaman, A., Butt, S., Alam, J. M., Shahwan, M., Hunt, M., & Imtiaz, S. (2015). Experimental and numerical investigations of bubble dynamics in porous and non-porous media. In Petroleum Technology (Vol. 10). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/OMAE201542257

Experimental and numerical investigations of bubble dynamics in porous and non-porous media. / Rahaman, Azizur; Butt, S.; Alam, J. M.; Shahwan, M.; Hunt, M.; Imtiaz, S.

Petroleum Technology. Vol. 10 American Society of Mechanical Engineers (ASME), 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rahaman, A, Butt, S, Alam, JM, Shahwan, M, Hunt, M & Imtiaz, S 2015, Experimental and numerical investigations of bubble dynamics in porous and non-porous media. in Petroleum Technology. vol. 10, American Society of Mechanical Engineers (ASME), ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2015, St. John's, Canada, 31/5/15. https://doi.org/10.1115/OMAE201542257
Rahaman A, Butt S, Alam JM, Shahwan M, Hunt M, Imtiaz S. Experimental and numerical investigations of bubble dynamics in porous and non-porous media. In Petroleum Technology. Vol. 10. American Society of Mechanical Engineers (ASME). 2015 https://doi.org/10.1115/OMAE201542257
Rahaman, Azizur ; Butt, S. ; Alam, J. M. ; Shahwan, M. ; Hunt, M. ; Imtiaz, S. / Experimental and numerical investigations of bubble dynamics in porous and non-porous media. Petroleum Technology. Vol. 10 American Society of Mechanical Engineers (ASME), 2015.
@inproceedings{25e1e31d9f1742fc8d20f96796118b48,
title = "Experimental and numerical investigations of bubble dynamics in porous and non-porous media",
abstract = "In this study an experimental work is conducted to investigate the shape and speed of an air bubble in a pipe filled with different viscous fluids and porous media. The experimental results are also compared with the Computational Fluid Dynamics (CFD) simulation. Multiphase flows are complex due to the infinitely deformable nature of interface in gas/liquid flows. If one of the phases is gas acts as dispersed phase in the form of bubble, then the complexity will arise from the nonuniform distribution of bubbles in the pipe cross-section and axial distance. Inclusion of different viscous fluids simulating the industrial scale hydrocarbon properties brings added challenge in understating the bubble rise, coalescence and breakup dynamics. Moreover, bubble rise and change of shape of bubble in porous media will bring additional complexity in the flow dynamics. The pipe used in the experiment and CFD was 11.6 cm ID and a length of 100 cm. Three situations were tested: i) an air bubble rising in stagnant water, ii) an air bubble rising in moving water, and iii) an air bubble rising in a stagnant water but filled with porous media with porosity of 27{\%}. Preliminary CFD results indicate that an air bubble has an average velocity of 0.2468 m/s and 0.2524 m/s in stagnant water and moving water, respectively, which is very close to experimental results.",
keywords = "Bubble Rise, CFD, Experimental, Porous Media, Surface Tension, Two phase flow, Viscosity",
author = "Azizur Rahaman and S. Butt and Alam, {J. M.} and M. Shahwan and M. Hunt and S. Imtiaz",
year = "2015",
doi = "10.1115/OMAE201542257",
language = "English",
volume = "10",
booktitle = "Petroleum Technology",
publisher = "American Society of Mechanical Engineers (ASME)",

}

TY - GEN

T1 - Experimental and numerical investigations of bubble dynamics in porous and non-porous media

AU - Rahaman, Azizur

AU - Butt, S.

AU - Alam, J. M.

AU - Shahwan, M.

AU - Hunt, M.

AU - Imtiaz, S.

PY - 2015

Y1 - 2015

N2 - In this study an experimental work is conducted to investigate the shape and speed of an air bubble in a pipe filled with different viscous fluids and porous media. The experimental results are also compared with the Computational Fluid Dynamics (CFD) simulation. Multiphase flows are complex due to the infinitely deformable nature of interface in gas/liquid flows. If one of the phases is gas acts as dispersed phase in the form of bubble, then the complexity will arise from the nonuniform distribution of bubbles in the pipe cross-section and axial distance. Inclusion of different viscous fluids simulating the industrial scale hydrocarbon properties brings added challenge in understating the bubble rise, coalescence and breakup dynamics. Moreover, bubble rise and change of shape of bubble in porous media will bring additional complexity in the flow dynamics. The pipe used in the experiment and CFD was 11.6 cm ID and a length of 100 cm. Three situations were tested: i) an air bubble rising in stagnant water, ii) an air bubble rising in moving water, and iii) an air bubble rising in a stagnant water but filled with porous media with porosity of 27%. Preliminary CFD results indicate that an air bubble has an average velocity of 0.2468 m/s and 0.2524 m/s in stagnant water and moving water, respectively, which is very close to experimental results.

AB - In this study an experimental work is conducted to investigate the shape and speed of an air bubble in a pipe filled with different viscous fluids and porous media. The experimental results are also compared with the Computational Fluid Dynamics (CFD) simulation. Multiphase flows are complex due to the infinitely deformable nature of interface in gas/liquid flows. If one of the phases is gas acts as dispersed phase in the form of bubble, then the complexity will arise from the nonuniform distribution of bubbles in the pipe cross-section and axial distance. Inclusion of different viscous fluids simulating the industrial scale hydrocarbon properties brings added challenge in understating the bubble rise, coalescence and breakup dynamics. Moreover, bubble rise and change of shape of bubble in porous media will bring additional complexity in the flow dynamics. The pipe used in the experiment and CFD was 11.6 cm ID and a length of 100 cm. Three situations were tested: i) an air bubble rising in stagnant water, ii) an air bubble rising in moving water, and iii) an air bubble rising in a stagnant water but filled with porous media with porosity of 27%. Preliminary CFD results indicate that an air bubble has an average velocity of 0.2468 m/s and 0.2524 m/s in stagnant water and moving water, respectively, which is very close to experimental results.

KW - Bubble Rise

KW - CFD

KW - Experimental

KW - Porous Media

KW - Surface Tension

KW - Two phase flow

KW - Viscosity

UR - http://www.scopus.com/inward/record.url?scp=84947785602&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84947785602&partnerID=8YFLogxK

U2 - 10.1115/OMAE201542257

DO - 10.1115/OMAE201542257

M3 - Conference contribution

VL - 10

BT - Petroleum Technology

PB - American Society of Mechanical Engineers (ASME)

ER -