Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives

Hisham Eldeeb, Mohamed Abdelrahem, Christoph Hackl, Ayman Abdel-Khalik

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Throughout literature, a clear concern for achieving high performance stator current control of asymmetrical dual three- phase IPMSM drives as well as fault tolerant strategies were demonstrated. However, limited attention was given on how to effectively compute, simulate and compare the expected (i.e. simulated) and the practically applied electromechanical torque. This requires an accurate electromechanical model with precise electromechanical torque estimation. This paper presents a high fidelity direct-quadrature (dq) model capable of describing the generated electromechanical torque. The presented method is based on obtaining the non-linear flux linkage maps as well as describing the harmonic models, which contribute to the average and ripple torque, respectively. The flux linkage maps contribute in the tuning of the stator current controllers and electromechanical torque computation, which is compared to the computed torque from the manufacturer parameters and literature. The proposed model does not require previous knowledge concerning geometric and machine design data. The results coincide to a high extent with the experimental validations on a 2.5 kW asymmetrical dual three-phase IPMSM prototype.

Original languageEnglish
Title of host publicationProceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages126-132
Number of pages7
Volume2018-June
ISBN (Print)9781538637050
DOIs
Publication statusPublished - 10 Aug 2018
Event27th IEEE International Symposium on Industrial Electronics, ISIE 2018 - Cairns, Australia
Duration: 13 Jun 201815 Jun 2018

Other

Other27th IEEE International Symposium on Industrial Electronics, ISIE 2018
CountryAustralia
CityCairns
Period13/6/1815/6/18

Fingerprint

Torque
Stators
Fluxes
Machine design
Electric current control
Tuning
Controllers

Keywords

  • Current control
  • Dual three-phase
  • IPMSM
  • modeling

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Cite this

Eldeeb, H., Abdelrahem, M., Hackl, C., & Abdel-Khalik, A. (2018). Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives. In Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018 (Vol. 2018-June, pp. 126-132). [8433755] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISIE.2018.8433755

Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives. / Eldeeb, Hisham; Abdelrahem, Mohamed; Hackl, Christoph; Abdel-Khalik, Ayman.

Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018. Vol. 2018-June Institute of Electrical and Electronics Engineers Inc., 2018. p. 126-132 8433755.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Eldeeb, H, Abdelrahem, M, Hackl, C & Abdel-Khalik, A 2018, Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives. in Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018. vol. 2018-June, 8433755, Institute of Electrical and Electronics Engineers Inc., pp. 126-132, 27th IEEE International Symposium on Industrial Electronics, ISIE 2018, Cairns, Australia, 13/6/18. https://doi.org/10.1109/ISIE.2018.8433755
Eldeeb H, Abdelrahem M, Hackl C, Abdel-Khalik A. Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives. In Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018. Vol. 2018-June. Institute of Electrical and Electronics Engineers Inc. 2018. p. 126-132. 8433755 https://doi.org/10.1109/ISIE.2018.8433755
Eldeeb, Hisham ; Abdelrahem, Mohamed ; Hackl, Christoph ; Abdel-Khalik, Ayman. / Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives. Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018. Vol. 2018-June Institute of Electrical and Electronics Engineers Inc., 2018. pp. 126-132
@inproceedings{852952ccc2af434bb7bec179f92d4197,
title = "Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives",
abstract = "Throughout literature, a clear concern for achieving high performance stator current control of asymmetrical dual three- phase IPMSM drives as well as fault tolerant strategies were demonstrated. However, limited attention was given on how to effectively compute, simulate and compare the expected (i.e. simulated) and the practically applied electromechanical torque. This requires an accurate electromechanical model with precise electromechanical torque estimation. This paper presents a high fidelity direct-quadrature (dq) model capable of describing the generated electromechanical torque. The presented method is based on obtaining the non-linear flux linkage maps as well as describing the harmonic models, which contribute to the average and ripple torque, respectively. The flux linkage maps contribute in the tuning of the stator current controllers and electromechanical torque computation, which is compared to the computed torque from the manufacturer parameters and literature. The proposed model does not require previous knowledge concerning geometric and machine design data. The results coincide to a high extent with the experimental validations on a 2.5 kW asymmetrical dual three-phase IPMSM prototype.",
keywords = "Current control, Dual three-phase, IPMSM, modeling",
author = "Hisham Eldeeb and Mohamed Abdelrahem and Christoph Hackl and Ayman Abdel-Khalik",
year = "2018",
month = "8",
day = "10",
doi = "10.1109/ISIE.2018.8433755",
language = "English",
isbn = "9781538637050",
volume = "2018-June",
pages = "126--132",
booktitle = "Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives

AU - Eldeeb, Hisham

AU - Abdelrahem, Mohamed

AU - Hackl, Christoph

AU - Abdel-Khalik, Ayman

PY - 2018/8/10

Y1 - 2018/8/10

N2 - Throughout literature, a clear concern for achieving high performance stator current control of asymmetrical dual three- phase IPMSM drives as well as fault tolerant strategies were demonstrated. However, limited attention was given on how to effectively compute, simulate and compare the expected (i.e. simulated) and the practically applied electromechanical torque. This requires an accurate electromechanical model with precise electromechanical torque estimation. This paper presents a high fidelity direct-quadrature (dq) model capable of describing the generated electromechanical torque. The presented method is based on obtaining the non-linear flux linkage maps as well as describing the harmonic models, which contribute to the average and ripple torque, respectively. The flux linkage maps contribute in the tuning of the stator current controllers and electromechanical torque computation, which is compared to the computed torque from the manufacturer parameters and literature. The proposed model does not require previous knowledge concerning geometric and machine design data. The results coincide to a high extent with the experimental validations on a 2.5 kW asymmetrical dual three-phase IPMSM prototype.

AB - Throughout literature, a clear concern for achieving high performance stator current control of asymmetrical dual three- phase IPMSM drives as well as fault tolerant strategies were demonstrated. However, limited attention was given on how to effectively compute, simulate and compare the expected (i.e. simulated) and the practically applied electromechanical torque. This requires an accurate electromechanical model with precise electromechanical torque estimation. This paper presents a high fidelity direct-quadrature (dq) model capable of describing the generated electromechanical torque. The presented method is based on obtaining the non-linear flux linkage maps as well as describing the harmonic models, which contribute to the average and ripple torque, respectively. The flux linkage maps contribute in the tuning of the stator current controllers and electromechanical torque computation, which is compared to the computed torque from the manufacturer parameters and literature. The proposed model does not require previous knowledge concerning geometric and machine design data. The results coincide to a high extent with the experimental validations on a 2.5 kW asymmetrical dual three-phase IPMSM prototype.

KW - Current control

KW - Dual three-phase

KW - IPMSM

KW - modeling

UR - http://www.scopus.com/inward/record.url?scp=85052406904&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85052406904&partnerID=8YFLogxK

U2 - 10.1109/ISIE.2018.8433755

DO - 10.1109/ISIE.2018.8433755

M3 - Conference contribution

SN - 9781538637050

VL - 2018-June

SP - 126

EP - 132

BT - Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018

PB - Institute of Electrical and Electronics Engineers Inc.

ER -