Energy flow in the information technology stack

Introducing the coefficient of performance of the ensemble

Chandrakant D. Patel, Ratnesh K. Sharma, Cullen E. Bash, Abdlmonem Beitelmal

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Abstract

The information technology industry is in the midst of a transformation to lower the cost of operation through consolidation and better utilization of critical data center resources. Successful consolidation necessitates increasing utilization of capital intensive "always-on" data center infrastructure, and reducing the recurring cost of power. A need exists, therefore for an end to end physical model that can be used to design and manage dense data centers and determine the cost of operating a data center. The chip core to the cooling tower model must capture the power levels and thermo-fluids behavior of chips, systems, aggregation of systems in racks, rows of racks, room flow distribution, air conditioning equipment, hydronics, vapor compression systems, pumps and heat exchangers. Earlier work has outlined the foundation for creation of a "smart" data center through use of flexible cooling resources and a distributed sensing and control system that can provision the cooling resources based on the need. This paper shows a common thermodynamic platform which serves as an evaluation and basis for policy based control engine for such a "smart" data center with much broader reach - from chip core to the cooling tower. Computational Fluid Dynamics modeling is performed to determine the computer room air conditioning utilization for a given distribution of heat load and cooling resources in a production data center. Coefficient of performance (COP) of the computer room air conditioning units, based on the level of utilization, is used with COP of other cooling resources in the stack to determine the COP of the ensemble. The ensemble COP represents an overall measure of the performance of the heat removal stack in a data center.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Print)0791837904, 9780791837900
DOIs
Publication statusPublished - 2006
Externally publishedYes
Event2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Chicago, IL
Duration: 5 Nov 200610 Nov 2006

Other

Other2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006
CityChicago, IL
Period5/11/0610/11/06

Fingerprint

Information technology
Air conditioning
Cooling
Cooling towers
Consolidation
Costs
Thermal load
Heat exchangers
Computational fluid dynamics
Agglomeration
Vapors
Pumps
Thermodynamics
Engines
Control systems
Fluids
Industry

Keywords

  • Chip
  • Control
  • Data center
  • Data center management
  • Energy
  • Energy efficiency
  • Smart data center
  • Sustainability
  • System

ASJC Scopus subject areas

  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Patel, C. D., Sharma, R. K., Bash, C. E., & Beitelmal, A. (2006). Energy flow in the information technology stack: Introducing the coefficient of performance of the ensemble. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2006-14830

Energy flow in the information technology stack : Introducing the coefficient of performance of the ensemble. / Patel, Chandrakant D.; Sharma, Ratnesh K.; Bash, Cullen E.; Beitelmal, Abdlmonem.

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. American Society of Mechanical Engineers (ASME), 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patel, CD, Sharma, RK, Bash, CE & Beitelmal, A 2006, Energy flow in the information technology stack: Introducing the coefficient of performance of the ensemble. in American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. American Society of Mechanical Engineers (ASME), 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, 5/11/06. https://doi.org/10.1115/IMECE2006-14830
Patel CD, Sharma RK, Bash CE, Beitelmal A. Energy flow in the information technology stack: Introducing the coefficient of performance of the ensemble. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. American Society of Mechanical Engineers (ASME). 2006 https://doi.org/10.1115/IMECE2006-14830
Patel, Chandrakant D. ; Sharma, Ratnesh K. ; Bash, Cullen E. ; Beitelmal, Abdlmonem. / Energy flow in the information technology stack : Introducing the coefficient of performance of the ensemble. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. American Society of Mechanical Engineers (ASME), 2006.
@inproceedings{c3ff5c49231e4beba96cd469ff15aaa0,
title = "Energy flow in the information technology stack: Introducing the coefficient of performance of the ensemble",
abstract = "The information technology industry is in the midst of a transformation to lower the cost of operation through consolidation and better utilization of critical data center resources. Successful consolidation necessitates increasing utilization of capital intensive {"}always-on{"} data center infrastructure, and reducing the recurring cost of power. A need exists, therefore for an end to end physical model that can be used to design and manage dense data centers and determine the cost of operating a data center. The chip core to the cooling tower model must capture the power levels and thermo-fluids behavior of chips, systems, aggregation of systems in racks, rows of racks, room flow distribution, air conditioning equipment, hydronics, vapor compression systems, pumps and heat exchangers. Earlier work has outlined the foundation for creation of a {"}smart{"} data center through use of flexible cooling resources and a distributed sensing and control system that can provision the cooling resources based on the need. This paper shows a common thermodynamic platform which serves as an evaluation and basis for policy based control engine for such a {"}smart{"} data center with much broader reach - from chip core to the cooling tower. Computational Fluid Dynamics modeling is performed to determine the computer room air conditioning utilization for a given distribution of heat load and cooling resources in a production data center. Coefficient of performance (COP) of the computer room air conditioning units, based on the level of utilization, is used with COP of other cooling resources in the stack to determine the COP of the ensemble. The ensemble COP represents an overall measure of the performance of the heat removal stack in a data center.",
keywords = "Chip, Control, Data center, Data center management, Energy, Energy efficiency, Smart data center, Sustainability, System",
author = "Patel, {Chandrakant D.} and Sharma, {Ratnesh K.} and Bash, {Cullen E.} and Abdlmonem Beitelmal",
year = "2006",
doi = "10.1115/IMECE2006-14830",
language = "English",
isbn = "0791837904",
booktitle = "American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD",
publisher = "American Society of Mechanical Engineers (ASME)",

}

TY - GEN

T1 - Energy flow in the information technology stack

T2 - Introducing the coefficient of performance of the ensemble

AU - Patel, Chandrakant D.

AU - Sharma, Ratnesh K.

AU - Bash, Cullen E.

AU - Beitelmal, Abdlmonem

PY - 2006

Y1 - 2006

N2 - The information technology industry is in the midst of a transformation to lower the cost of operation through consolidation and better utilization of critical data center resources. Successful consolidation necessitates increasing utilization of capital intensive "always-on" data center infrastructure, and reducing the recurring cost of power. A need exists, therefore for an end to end physical model that can be used to design and manage dense data centers and determine the cost of operating a data center. The chip core to the cooling tower model must capture the power levels and thermo-fluids behavior of chips, systems, aggregation of systems in racks, rows of racks, room flow distribution, air conditioning equipment, hydronics, vapor compression systems, pumps and heat exchangers. Earlier work has outlined the foundation for creation of a "smart" data center through use of flexible cooling resources and a distributed sensing and control system that can provision the cooling resources based on the need. This paper shows a common thermodynamic platform which serves as an evaluation and basis for policy based control engine for such a "smart" data center with much broader reach - from chip core to the cooling tower. Computational Fluid Dynamics modeling is performed to determine the computer room air conditioning utilization for a given distribution of heat load and cooling resources in a production data center. Coefficient of performance (COP) of the computer room air conditioning units, based on the level of utilization, is used with COP of other cooling resources in the stack to determine the COP of the ensemble. The ensemble COP represents an overall measure of the performance of the heat removal stack in a data center.

AB - The information technology industry is in the midst of a transformation to lower the cost of operation through consolidation and better utilization of critical data center resources. Successful consolidation necessitates increasing utilization of capital intensive "always-on" data center infrastructure, and reducing the recurring cost of power. A need exists, therefore for an end to end physical model that can be used to design and manage dense data centers and determine the cost of operating a data center. The chip core to the cooling tower model must capture the power levels and thermo-fluids behavior of chips, systems, aggregation of systems in racks, rows of racks, room flow distribution, air conditioning equipment, hydronics, vapor compression systems, pumps and heat exchangers. Earlier work has outlined the foundation for creation of a "smart" data center through use of flexible cooling resources and a distributed sensing and control system that can provision the cooling resources based on the need. This paper shows a common thermodynamic platform which serves as an evaluation and basis for policy based control engine for such a "smart" data center with much broader reach - from chip core to the cooling tower. Computational Fluid Dynamics modeling is performed to determine the computer room air conditioning utilization for a given distribution of heat load and cooling resources in a production data center. Coefficient of performance (COP) of the computer room air conditioning units, based on the level of utilization, is used with COP of other cooling resources in the stack to determine the COP of the ensemble. The ensemble COP represents an overall measure of the performance of the heat removal stack in a data center.

KW - Chip

KW - Control

KW - Data center

KW - Data center management

KW - Energy

KW - Energy efficiency

KW - Smart data center

KW - Sustainability

KW - System

UR - http://www.scopus.com/inward/record.url?scp=84920631761&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84920631761&partnerID=8YFLogxK

U2 - 10.1115/IMECE2006-14830

DO - 10.1115/IMECE2006-14830

M3 - Conference contribution

SN - 0791837904

SN - 9780791837900

BT - American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

PB - American Society of Mechanical Engineers (ASME)

ER -