Design, synthesis and nucleate boiling performance assessment of hybrid micro-nano porous surfaces for thermal management of concentrated photovoltaics (CPV)

Shoukat Alim Khan, Nurettin Sezer, Salman Ismail, Muammer Koç

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This study investigates the synergistic performance of hybrid micro-nano porous surfaces (HMNP) for Nucleate pool boiling (NBHT) and its application to thermal management of concentrated photovoltaics (CPV). A new set of HMNP surfaces was prepared by two-step method of hot powder compaction of micro-particles followed by nanoparticles coating. Three different surfaces, i.e., plain (P), microporous (MP), and hybrid micro-nano porous (HMNP) were examined for NBHT performance with de-ionized (DI) water as working fluid. In HMNP surfaces three different concentration of nanoparticles 0.0001%, 0.001%, and 0.01% were used for coating. MP showed enhanced HTC and CHF performance, which was further improved by HMNP coating with the highest performance at 0.01% concentration. Compared to P surface, the maximum increase for CHF of MP and HMNP was 1.79 and 2.5 times while the maximum increase in HTC was 1.8 and 2.33 for MP and HMNP surfaces, respectively. For the lowest applied heat flux of 110 kW/m2, the maximum decrease in wall superheat for MP, and HMNP coating was 2.5 °C and 3.7 °C, respectively as compared to the P surface. The increase in CHF and HTC was observed to increase with an increase in the concentration of coated nanoparticles in HMNP surface. Bubble dynamics were observed by the high-speed camera and Scanning Electron Microscope (SEM) analysis, and contact angle analysis were performed for P, MP and HMNP surfaces. In the end, an analytical study is performed to analyze the effect of P, MP and HMNP surface as a resulted enhancement of CPV cell performance.

Original languageEnglish
Pages (from-to)1056-1066
Number of pages11
JournalEnergy Conversion and Management
Volume195
DOIs
Publication statusPublished - 1 Sep 2019

Fingerprint

Nucleate boiling
Temperature control
Coatings
Nanoparticles

Keywords

  • Concentrated photovoltaics
  • Critical heat flux
  • Hybrid micro-nano coatings
  • Micro-nano scale surfaces
  • Nucleate pool boiling
  • Thermal management

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Nuclear Energy and Engineering
  • Fuel Technology
  • Energy Engineering and Power Technology

Cite this

Design, synthesis and nucleate boiling performance assessment of hybrid micro-nano porous surfaces for thermal management of concentrated photovoltaics (CPV). / Khan, Shoukat Alim; Sezer, Nurettin; Ismail, Salman; Koç, Muammer.

In: Energy Conversion and Management, Vol. 195, 01.09.2019, p. 1056-1066.

Research output: Contribution to journalArticle

@article{c0005e923b14446b94440bf6a4e107d1,
title = "Design, synthesis and nucleate boiling performance assessment of hybrid micro-nano porous surfaces for thermal management of concentrated photovoltaics (CPV)",
abstract = "This study investigates the synergistic performance of hybrid micro-nano porous surfaces (HMNP) for Nucleate pool boiling (NBHT) and its application to thermal management of concentrated photovoltaics (CPV). A new set of HMNP surfaces was prepared by two-step method of hot powder compaction of micro-particles followed by nanoparticles coating. Three different surfaces, i.e., plain (P), microporous (MP), and hybrid micro-nano porous (HMNP) were examined for NBHT performance with de-ionized (DI) water as working fluid. In HMNP surfaces three different concentration of nanoparticles 0.0001{\%}, 0.001{\%}, and 0.01{\%} were used for coating. MP showed enhanced HTC and CHF performance, which was further improved by HMNP coating with the highest performance at 0.01{\%} concentration. Compared to P surface, the maximum increase for CHF of MP and HMNP was 1.79 and 2.5 times while the maximum increase in HTC was 1.8 and 2.33 for MP and HMNP surfaces, respectively. For the lowest applied heat flux of 110 kW/m2, the maximum decrease in wall superheat for MP, and HMNP coating was 2.5 °C and 3.7 °C, respectively as compared to the P surface. The increase in CHF and HTC was observed to increase with an increase in the concentration of coated nanoparticles in HMNP surface. Bubble dynamics were observed by the high-speed camera and Scanning Electron Microscope (SEM) analysis, and contact angle analysis were performed for P, MP and HMNP surfaces. In the end, an analytical study is performed to analyze the effect of P, MP and HMNP surface as a resulted enhancement of CPV cell performance.",
keywords = "Concentrated photovoltaics, Critical heat flux, Hybrid micro-nano coatings, Micro-nano scale surfaces, Nucleate pool boiling, Thermal management",
author = "Khan, {Shoukat Alim} and Nurettin Sezer and Salman Ismail and Muammer Ko{\cc}",
year = "2019",
month = "9",
day = "1",
doi = "10.1016/j.enconman.2019.05.068",
language = "English",
volume = "195",
pages = "1056--1066",
journal = "Energy Conversion and Management",
issn = "0196-8904",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Design, synthesis and nucleate boiling performance assessment of hybrid micro-nano porous surfaces for thermal management of concentrated photovoltaics (CPV)

AU - Khan, Shoukat Alim

AU - Sezer, Nurettin

AU - Ismail, Salman

AU - Koç, Muammer

PY - 2019/9/1

Y1 - 2019/9/1

N2 - This study investigates the synergistic performance of hybrid micro-nano porous surfaces (HMNP) for Nucleate pool boiling (NBHT) and its application to thermal management of concentrated photovoltaics (CPV). A new set of HMNP surfaces was prepared by two-step method of hot powder compaction of micro-particles followed by nanoparticles coating. Three different surfaces, i.e., plain (P), microporous (MP), and hybrid micro-nano porous (HMNP) were examined for NBHT performance with de-ionized (DI) water as working fluid. In HMNP surfaces three different concentration of nanoparticles 0.0001%, 0.001%, and 0.01% were used for coating. MP showed enhanced HTC and CHF performance, which was further improved by HMNP coating with the highest performance at 0.01% concentration. Compared to P surface, the maximum increase for CHF of MP and HMNP was 1.79 and 2.5 times while the maximum increase in HTC was 1.8 and 2.33 for MP and HMNP surfaces, respectively. For the lowest applied heat flux of 110 kW/m2, the maximum decrease in wall superheat for MP, and HMNP coating was 2.5 °C and 3.7 °C, respectively as compared to the P surface. The increase in CHF and HTC was observed to increase with an increase in the concentration of coated nanoparticles in HMNP surface. Bubble dynamics were observed by the high-speed camera and Scanning Electron Microscope (SEM) analysis, and contact angle analysis were performed for P, MP and HMNP surfaces. In the end, an analytical study is performed to analyze the effect of P, MP and HMNP surface as a resulted enhancement of CPV cell performance.

AB - This study investigates the synergistic performance of hybrid micro-nano porous surfaces (HMNP) for Nucleate pool boiling (NBHT) and its application to thermal management of concentrated photovoltaics (CPV). A new set of HMNP surfaces was prepared by two-step method of hot powder compaction of micro-particles followed by nanoparticles coating. Three different surfaces, i.e., plain (P), microporous (MP), and hybrid micro-nano porous (HMNP) were examined for NBHT performance with de-ionized (DI) water as working fluid. In HMNP surfaces three different concentration of nanoparticles 0.0001%, 0.001%, and 0.01% were used for coating. MP showed enhanced HTC and CHF performance, which was further improved by HMNP coating with the highest performance at 0.01% concentration. Compared to P surface, the maximum increase for CHF of MP and HMNP was 1.79 and 2.5 times while the maximum increase in HTC was 1.8 and 2.33 for MP and HMNP surfaces, respectively. For the lowest applied heat flux of 110 kW/m2, the maximum decrease in wall superheat for MP, and HMNP coating was 2.5 °C and 3.7 °C, respectively as compared to the P surface. The increase in CHF and HTC was observed to increase with an increase in the concentration of coated nanoparticles in HMNP surface. Bubble dynamics were observed by the high-speed camera and Scanning Electron Microscope (SEM) analysis, and contact angle analysis were performed for P, MP and HMNP surfaces. In the end, an analytical study is performed to analyze the effect of P, MP and HMNP surface as a resulted enhancement of CPV cell performance.

KW - Concentrated photovoltaics

KW - Critical heat flux

KW - Hybrid micro-nano coatings

KW - Micro-nano scale surfaces

KW - Nucleate pool boiling

KW - Thermal management

UR - http://www.scopus.com/inward/record.url?scp=85066314275&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85066314275&partnerID=8YFLogxK

U2 - 10.1016/j.enconman.2019.05.068

DO - 10.1016/j.enconman.2019.05.068

M3 - Article

AN - SCOPUS:85066314275

VL - 195

SP - 1056

EP - 1066

JO - Energy Conversion and Management

JF - Energy Conversion and Management

SN - 0196-8904

ER -