Design and implementation of DSP-based three-phase PFC

Sertac Bayhan, Sevki Demirbas, Ilhan Garip

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this study, DSP based three phase PFC system for switching devices such as switching mode power supplies has been designed and implemented. The experimental set uses MATLAB/SIMULINK compatible eZdsp F2812 target equipped with a TI TMS320F2812 DSP. The DSP produces the driving signals by realizing control algorithm, current control and PWM modulation methods. MATLAB/SIMULINK software has been used to modeling of control algorithm, current control and PWM modulation techniques. Therefore more flexible control system has been carried out while reducing software writing time. Experimental results show that, input current of PFC system is in phase with utility voltage and its total harmonic distortion (THD) is in the range described at international standards.

Original languageEnglish
Title of host publication2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011
DOIs
Publication statusPublished - 2011
Externally publishedYes
Event2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011 - Sarajevo, Bosnia and Herzegovina
Duration: 27 Oct 201129 Oct 2011

Other

Other2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011
CountryBosnia and Herzegovina
CitySarajevo
Period27/10/1129/10/11

Fingerprint

Electric current control
Pulse width modulation
MATLAB
Modulation
Harmonic distortion
Control systems
Electric potential

Keywords

  • digital signal processor (DSP)
  • Power factor correction (PFC)
  • PWM rectifier

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Information Systems
  • Control and Systems Engineering

Cite this

Bayhan, S., Demirbas, S., & Garip, I. (2011). Design and implementation of DSP-based three-phase PFC. In 2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011 [6102121] https://doi.org/10.1109/ICAT.2011.6102121

Design and implementation of DSP-based three-phase PFC. / Bayhan, Sertac; Demirbas, Sevki; Garip, Ilhan.

2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011. 2011. 6102121.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bayhan, S, Demirbas, S & Garip, I 2011, Design and implementation of DSP-based three-phase PFC. in 2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011., 6102121, 2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011, Sarajevo, Bosnia and Herzegovina, 27/10/11. https://doi.org/10.1109/ICAT.2011.6102121
Bayhan S, Demirbas S, Garip I. Design and implementation of DSP-based three-phase PFC. In 2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011. 2011. 6102121 https://doi.org/10.1109/ICAT.2011.6102121
Bayhan, Sertac ; Demirbas, Sevki ; Garip, Ilhan. / Design and implementation of DSP-based three-phase PFC. 2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011. 2011.
@inproceedings{384902e3ff1b471ba425638cf6515a64,
title = "Design and implementation of DSP-based three-phase PFC",
abstract = "In this study, DSP based three phase PFC system for switching devices such as switching mode power supplies has been designed and implemented. The experimental set uses MATLAB/SIMULINK compatible eZdsp F2812 target equipped with a TI TMS320F2812 DSP. The DSP produces the driving signals by realizing control algorithm, current control and PWM modulation methods. MATLAB/SIMULINK software has been used to modeling of control algorithm, current control and PWM modulation techniques. Therefore more flexible control system has been carried out while reducing software writing time. Experimental results show that, input current of PFC system is in phase with utility voltage and its total harmonic distortion (THD) is in the range described at international standards.",
keywords = "digital signal processor (DSP), Power factor correction (PFC), PWM rectifier",
author = "Sertac Bayhan and Sevki Demirbas and Ilhan Garip",
year = "2011",
doi = "10.1109/ICAT.2011.6102121",
language = "English",
isbn = "9781457707469",
booktitle = "2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011",

}

TY - GEN

T1 - Design and implementation of DSP-based three-phase PFC

AU - Bayhan, Sertac

AU - Demirbas, Sevki

AU - Garip, Ilhan

PY - 2011

Y1 - 2011

N2 - In this study, DSP based three phase PFC system for switching devices such as switching mode power supplies has been designed and implemented. The experimental set uses MATLAB/SIMULINK compatible eZdsp F2812 target equipped with a TI TMS320F2812 DSP. The DSP produces the driving signals by realizing control algorithm, current control and PWM modulation methods. MATLAB/SIMULINK software has been used to modeling of control algorithm, current control and PWM modulation techniques. Therefore more flexible control system has been carried out while reducing software writing time. Experimental results show that, input current of PFC system is in phase with utility voltage and its total harmonic distortion (THD) is in the range described at international standards.

AB - In this study, DSP based three phase PFC system for switching devices such as switching mode power supplies has been designed and implemented. The experimental set uses MATLAB/SIMULINK compatible eZdsp F2812 target equipped with a TI TMS320F2812 DSP. The DSP produces the driving signals by realizing control algorithm, current control and PWM modulation methods. MATLAB/SIMULINK software has been used to modeling of control algorithm, current control and PWM modulation techniques. Therefore more flexible control system has been carried out while reducing software writing time. Experimental results show that, input current of PFC system is in phase with utility voltage and its total harmonic distortion (THD) is in the range described at international standards.

KW - digital signal processor (DSP)

KW - Power factor correction (PFC)

KW - PWM rectifier

UR - http://www.scopus.com/inward/record.url?scp=84855841556&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84855841556&partnerID=8YFLogxK

U2 - 10.1109/ICAT.2011.6102121

DO - 10.1109/ICAT.2011.6102121

M3 - Conference contribution

AN - SCOPUS:84855841556

SN - 9781457707469

BT - 2011 23rd International Symposium on Information, Communication and Automation Technologies, ICAT 2011

ER -