Coupled-inductor filter: A basic filter building block

Robert Balog, Philip T. Krein

Research output: Contribution to journalArticle

34 Citations (Scopus)

Abstract

Coupled-magnetics and coupled-inductor filters provide smoothing in a power converter by steering ripple current away from the quite port. While this concept is not new, topologies claiming to be new or novel continue to be reported in the literature, suggesting that the ripple-steering phenomenon may not be well understood to be a property of the filter block itself. This paper describes a general coupled-inductor filter block and presents a brief history of its application starting with the earliest known version of the circuit, which dates back to a 1923 patent application. The coupled-inductor circuit model is reviewed, starting with the basic topology and ideal circuit elements. Real circuit elements are then considered along with the effects of equivalent series resistance and other parasitic elements. A circuit-based filtering approach is used to emphasize the filtering aspect of the coupled inductor. It will be seen that the coupled-inductor filter can exhibit a low pass with notch frequency response. This provides the ability to achieve extra attenuation at a particular frequency, such as the converter switching frequency, which can reduce the overall filtering burden without adding extra inductive components. When the filter components are treated as a functional circuit group, instead of an interconnection of inductors and capacitors, the coupled-inductor filter can be analyzed as a drop-in replacement wherever a smoothing choke would normally be used and does not depend on converter voltage waveforms. A topology transformation of the uk converter shows that zero ripple in not a special property of the topology, but can be achieved using the coupled-inductor filter block.

Original languageEnglish
Article number6145773
Pages (from-to)537-546
Number of pages10
JournalIEEE Transactions on Power Electronics
Volume28
Issue number1
DOIs
Publication statusPublished - 2013
Externally publishedYes

Fingerprint

Networks (circuits)
Topology
Electric inductors
Power converters
Switching frequency
Frequency response
Capacitors
Electric potential

Keywords

  • Coupled inductor
  • coupled-inductor filter
  • inductors
  • integrated magnetic
  • magnetic devices
  • notch filters
  • power filters
  • ripple steering

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Coupled-inductor filter : A basic filter building block. / Balog, Robert; Krein, Philip T.

In: IEEE Transactions on Power Electronics, Vol. 28, No. 1, 6145773, 2013, p. 537-546.

Research output: Contribution to journalArticle

@article{bf73e199b4564e25af53ea41bd8f707f,
title = "Coupled-inductor filter: A basic filter building block",
abstract = "Coupled-magnetics and coupled-inductor filters provide smoothing in a power converter by steering ripple current away from the quite port. While this concept is not new, topologies claiming to be new or novel continue to be reported in the literature, suggesting that the ripple-steering phenomenon may not be well understood to be a property of the filter block itself. This paper describes a general coupled-inductor filter block and presents a brief history of its application starting with the earliest known version of the circuit, which dates back to a 1923 patent application. The coupled-inductor circuit model is reviewed, starting with the basic topology and ideal circuit elements. Real circuit elements are then considered along with the effects of equivalent series resistance and other parasitic elements. A circuit-based filtering approach is used to emphasize the filtering aspect of the coupled inductor. It will be seen that the coupled-inductor filter can exhibit a low pass with notch frequency response. This provides the ability to achieve extra attenuation at a particular frequency, such as the converter switching frequency, which can reduce the overall filtering burden without adding extra inductive components. When the filter components are treated as a functional circuit group, instead of an interconnection of inductors and capacitors, the coupled-inductor filter can be analyzed as a drop-in replacement wherever a smoothing choke would normally be used and does not depend on converter voltage waveforms. A topology transformation of the uk converter shows that zero ripple in not a special property of the topology, but can be achieved using the coupled-inductor filter block.",
keywords = "Coupled inductor, coupled-inductor filter, inductors, integrated magnetic, magnetic devices, notch filters, power filters, ripple steering",
author = "Robert Balog and Krein, {Philip T.}",
year = "2013",
doi = "10.1109/TPEL.2012.2186828",
language = "English",
volume = "28",
pages = "537--546",
journal = "IEEE Transactions on Power Electronics",
issn = "0885-8993",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "1",

}

TY - JOUR

T1 - Coupled-inductor filter

T2 - A basic filter building block

AU - Balog, Robert

AU - Krein, Philip T.

PY - 2013

Y1 - 2013

N2 - Coupled-magnetics and coupled-inductor filters provide smoothing in a power converter by steering ripple current away from the quite port. While this concept is not new, topologies claiming to be new or novel continue to be reported in the literature, suggesting that the ripple-steering phenomenon may not be well understood to be a property of the filter block itself. This paper describes a general coupled-inductor filter block and presents a brief history of its application starting with the earliest known version of the circuit, which dates back to a 1923 patent application. The coupled-inductor circuit model is reviewed, starting with the basic topology and ideal circuit elements. Real circuit elements are then considered along with the effects of equivalent series resistance and other parasitic elements. A circuit-based filtering approach is used to emphasize the filtering aspect of the coupled inductor. It will be seen that the coupled-inductor filter can exhibit a low pass with notch frequency response. This provides the ability to achieve extra attenuation at a particular frequency, such as the converter switching frequency, which can reduce the overall filtering burden without adding extra inductive components. When the filter components are treated as a functional circuit group, instead of an interconnection of inductors and capacitors, the coupled-inductor filter can be analyzed as a drop-in replacement wherever a smoothing choke would normally be used and does not depend on converter voltage waveforms. A topology transformation of the uk converter shows that zero ripple in not a special property of the topology, but can be achieved using the coupled-inductor filter block.

AB - Coupled-magnetics and coupled-inductor filters provide smoothing in a power converter by steering ripple current away from the quite port. While this concept is not new, topologies claiming to be new or novel continue to be reported in the literature, suggesting that the ripple-steering phenomenon may not be well understood to be a property of the filter block itself. This paper describes a general coupled-inductor filter block and presents a brief history of its application starting with the earliest known version of the circuit, which dates back to a 1923 patent application. The coupled-inductor circuit model is reviewed, starting with the basic topology and ideal circuit elements. Real circuit elements are then considered along with the effects of equivalent series resistance and other parasitic elements. A circuit-based filtering approach is used to emphasize the filtering aspect of the coupled inductor. It will be seen that the coupled-inductor filter can exhibit a low pass with notch frequency response. This provides the ability to achieve extra attenuation at a particular frequency, such as the converter switching frequency, which can reduce the overall filtering burden without adding extra inductive components. When the filter components are treated as a functional circuit group, instead of an interconnection of inductors and capacitors, the coupled-inductor filter can be analyzed as a drop-in replacement wherever a smoothing choke would normally be used and does not depend on converter voltage waveforms. A topology transformation of the uk converter shows that zero ripple in not a special property of the topology, but can be achieved using the coupled-inductor filter block.

KW - Coupled inductor

KW - coupled-inductor filter

KW - inductors

KW - integrated magnetic

KW - magnetic devices

KW - notch filters

KW - power filters

KW - ripple steering

UR - http://www.scopus.com/inward/record.url?scp=84866495900&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84866495900&partnerID=8YFLogxK

U2 - 10.1109/TPEL.2012.2186828

DO - 10.1109/TPEL.2012.2186828

M3 - Article

AN - SCOPUS:84866495900

VL - 28

SP - 537

EP - 546

JO - IEEE Transactions on Power Electronics

JF - IEEE Transactions on Power Electronics

SN - 0885-8993

IS - 1

M1 - 6145773

ER -