Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions

Muhammad Jujuly, Premkumar Thodi, Azizur Rahaman, Faisal Khan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

The purpose of this study is to investigate subsea pipeline leaks and their impact on the surroundings. A numerical approach using a computational fluid dynamics (CFD) package is used. The subsea condition is extremely harsh due to the remoteness and inaccessibility. Marine pipeline can be damaged directly by contact with drifting sea ice. Trenched pipeline is at risk as well, as it may be damaged by corrosion, or the pipeline could be plastically deformed by the resulting seabed shake down event. Furthermore, due to the remoteness and harsh climate of the under the ocean, it is difficult to conduct normal maintenance procedures. Leakage of pipelines in arctic subsea environment can have severe consequences. Leak detection and location identification in a timely manner is crucial because of the economic impact of a hydrocarbon spill to its stakeholders can be huge. Pipeline leakage could have an adverse impact on life, the environment, the economy and corporate reputation. It is imperative to take additional precautions while operating in the subsea regions, so rapid leak detection and location identification is crucially important. In this paper, a numerical modeling of a subsea pipeline leakage is performed using a 3-D turbulent flow model in computational fluid dynamics (CFD). Four different types of fluids are tested in this study, with specified operating conditions. It is difficult to conduct small-scale experiments on subsea pipeline with leakage, mainly because; the pipeline may need to release hydrocarbons to the environment. Further, since the industrial full-scale pipeline is large in diameter, fluid thermodynamics cannot be captured accurately in a small-scale, laboratory environment. Thus, a numerical simulation can provide a better understanding of pipeline internal flow and the consequences of pipeline leaks in different scales, reducing the cost and number of experiments. Commercially available ANSYS (FLUENT) computational fluid dynamics software is used to serve this purpose. ANSYS workbench provides integrated design, meshing technology, and large degree of freedom for pre- and post-processing for the fluid flow simulation in pipeline. The CFD simulation results in this study showed that the flow rate of the fluid escaping from the leak increases with pipeline operating pressure. The static pressure and pressure gradient along the axial length of the pipeline have observed a sharp signature variation near the leak orifice. This signature has been captured using pressure gradient curves. The temperature profiles near leak orifice indicate that the temperature is observed to increase slightly in the case of incompressible fluids; however, temperature drops rapidly for the compressible fluids. Transient simulation is performed to obtain the acoustic signature of the pipe near leak orifice. The power spectral density (PSD) signal is strong near the leak orifice and it dissipates as the distance and orientation from the leak orifice increase. The high-pressure fluid flow generates more noise than the low-pressure fluid flow. In order to model the turbulence large eddy simulation (LES) used and Ffowcs-Williams and Hawking (FW-H) model in FLUENT was activated to generate acoustic data. Time step of the simulation was selected At = 0.0005 s and the number of simulation 20000 to get higher frequency noise signal.

Original languageEnglish
Title of host publicationArctic Technology Conference 2016
PublisherOffshore Technology Conference
ISBN (Print)9781510835801
Publication statusPublished - 1 Jan 2016
EventArctic Technology Conference 2016 - St. John's, Canada
Duration: 24 Oct 201626 Oct 2016

Other

OtherArctic Technology Conference 2016
CountryCanada
CitySt. John's
Period24/10/1626/10/16

Fingerprint

computational fluid dynamics
Computational fluid dynamics
Pipelines
modeling
Orifices
Leakage (fluid)
leakage
Fluids
Flow of fluids
fluid
Leak detection
simulation
fluid flow
Hydrocarbons
Pressure gradient
pressure gradient
Acoustics
hydrocarbon
Sea ice
Flow simulation

ASJC Scopus subject areas

  • Geotechnical Engineering and Engineering Geology
  • Geochemistry and Petrology

Cite this

Jujuly, M., Thodi, P., Rahaman, A., & Khan, F. (2016). Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions. In Arctic Technology Conference 2016 Offshore Technology Conference.

Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions. / Jujuly, Muhammad; Thodi, Premkumar; Rahaman, Azizur; Khan, Faisal.

Arctic Technology Conference 2016. Offshore Technology Conference, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jujuly, M, Thodi, P, Rahaman, A & Khan, F 2016, Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions. in Arctic Technology Conference 2016. Offshore Technology Conference, Arctic Technology Conference 2016, St. John's, Canada, 24/10/16.
Jujuly M, Thodi P, Rahaman A, Khan F. Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions. In Arctic Technology Conference 2016. Offshore Technology Conference. 2016
Jujuly, Muhammad ; Thodi, Premkumar ; Rahaman, Azizur ; Khan, Faisal. / Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions. Arctic Technology Conference 2016. Offshore Technology Conference, 2016.
@inproceedings{5e156571f923450bbc734ed79426ed49,
title = "Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions",
abstract = "The purpose of this study is to investigate subsea pipeline leaks and their impact on the surroundings. A numerical approach using a computational fluid dynamics (CFD) package is used. The subsea condition is extremely harsh due to the remoteness and inaccessibility. Marine pipeline can be damaged directly by contact with drifting sea ice. Trenched pipeline is at risk as well, as it may be damaged by corrosion, or the pipeline could be plastically deformed by the resulting seabed shake down event. Furthermore, due to the remoteness and harsh climate of the under the ocean, it is difficult to conduct normal maintenance procedures. Leakage of pipelines in arctic subsea environment can have severe consequences. Leak detection and location identification in a timely manner is crucial because of the economic impact of a hydrocarbon spill to its stakeholders can be huge. Pipeline leakage could have an adverse impact on life, the environment, the economy and corporate reputation. It is imperative to take additional precautions while operating in the subsea regions, so rapid leak detection and location identification is crucially important. In this paper, a numerical modeling of a subsea pipeline leakage is performed using a 3-D turbulent flow model in computational fluid dynamics (CFD). Four different types of fluids are tested in this study, with specified operating conditions. It is difficult to conduct small-scale experiments on subsea pipeline with leakage, mainly because; the pipeline may need to release hydrocarbons to the environment. Further, since the industrial full-scale pipeline is large in diameter, fluid thermodynamics cannot be captured accurately in a small-scale, laboratory environment. Thus, a numerical simulation can provide a better understanding of pipeline internal flow and the consequences of pipeline leaks in different scales, reducing the cost and number of experiments. Commercially available ANSYS (FLUENT) computational fluid dynamics software is used to serve this purpose. ANSYS workbench provides integrated design, meshing technology, and large degree of freedom for pre- and post-processing for the fluid flow simulation in pipeline. The CFD simulation results in this study showed that the flow rate of the fluid escaping from the leak increases with pipeline operating pressure. The static pressure and pressure gradient along the axial length of the pipeline have observed a sharp signature variation near the leak orifice. This signature has been captured using pressure gradient curves. The temperature profiles near leak orifice indicate that the temperature is observed to increase slightly in the case of incompressible fluids; however, temperature drops rapidly for the compressible fluids. Transient simulation is performed to obtain the acoustic signature of the pipe near leak orifice. The power spectral density (PSD) signal is strong near the leak orifice and it dissipates as the distance and orientation from the leak orifice increase. The high-pressure fluid flow generates more noise than the low-pressure fluid flow. In order to model the turbulence large eddy simulation (LES) used and Ffowcs-Williams and Hawking (FW-H) model in FLUENT was activated to generate acoustic data. Time step of the simulation was selected At = 0.0005 s and the number of simulation 20000 to get higher frequency noise signal.",
author = "Muhammad Jujuly and Premkumar Thodi and Azizur Rahaman and Faisal Khan",
year = "2016",
month = "1",
day = "1",
language = "English",
isbn = "9781510835801",
booktitle = "Arctic Technology Conference 2016",
publisher = "Offshore Technology Conference",

}

TY - GEN

T1 - Computational fluid dynamics modeling of subsea pipeline leaks in arctic conditions

AU - Jujuly, Muhammad

AU - Thodi, Premkumar

AU - Rahaman, Azizur

AU - Khan, Faisal

PY - 2016/1/1

Y1 - 2016/1/1

N2 - The purpose of this study is to investigate subsea pipeline leaks and their impact on the surroundings. A numerical approach using a computational fluid dynamics (CFD) package is used. The subsea condition is extremely harsh due to the remoteness and inaccessibility. Marine pipeline can be damaged directly by contact with drifting sea ice. Trenched pipeline is at risk as well, as it may be damaged by corrosion, or the pipeline could be plastically deformed by the resulting seabed shake down event. Furthermore, due to the remoteness and harsh climate of the under the ocean, it is difficult to conduct normal maintenance procedures. Leakage of pipelines in arctic subsea environment can have severe consequences. Leak detection and location identification in a timely manner is crucial because of the economic impact of a hydrocarbon spill to its stakeholders can be huge. Pipeline leakage could have an adverse impact on life, the environment, the economy and corporate reputation. It is imperative to take additional precautions while operating in the subsea regions, so rapid leak detection and location identification is crucially important. In this paper, a numerical modeling of a subsea pipeline leakage is performed using a 3-D turbulent flow model in computational fluid dynamics (CFD). Four different types of fluids are tested in this study, with specified operating conditions. It is difficult to conduct small-scale experiments on subsea pipeline with leakage, mainly because; the pipeline may need to release hydrocarbons to the environment. Further, since the industrial full-scale pipeline is large in diameter, fluid thermodynamics cannot be captured accurately in a small-scale, laboratory environment. Thus, a numerical simulation can provide a better understanding of pipeline internal flow and the consequences of pipeline leaks in different scales, reducing the cost and number of experiments. Commercially available ANSYS (FLUENT) computational fluid dynamics software is used to serve this purpose. ANSYS workbench provides integrated design, meshing technology, and large degree of freedom for pre- and post-processing for the fluid flow simulation in pipeline. The CFD simulation results in this study showed that the flow rate of the fluid escaping from the leak increases with pipeline operating pressure. The static pressure and pressure gradient along the axial length of the pipeline have observed a sharp signature variation near the leak orifice. This signature has been captured using pressure gradient curves. The temperature profiles near leak orifice indicate that the temperature is observed to increase slightly in the case of incompressible fluids; however, temperature drops rapidly for the compressible fluids. Transient simulation is performed to obtain the acoustic signature of the pipe near leak orifice. The power spectral density (PSD) signal is strong near the leak orifice and it dissipates as the distance and orientation from the leak orifice increase. The high-pressure fluid flow generates more noise than the low-pressure fluid flow. In order to model the turbulence large eddy simulation (LES) used and Ffowcs-Williams and Hawking (FW-H) model in FLUENT was activated to generate acoustic data. Time step of the simulation was selected At = 0.0005 s and the number of simulation 20000 to get higher frequency noise signal.

AB - The purpose of this study is to investigate subsea pipeline leaks and their impact on the surroundings. A numerical approach using a computational fluid dynamics (CFD) package is used. The subsea condition is extremely harsh due to the remoteness and inaccessibility. Marine pipeline can be damaged directly by contact with drifting sea ice. Trenched pipeline is at risk as well, as it may be damaged by corrosion, or the pipeline could be plastically deformed by the resulting seabed shake down event. Furthermore, due to the remoteness and harsh climate of the under the ocean, it is difficult to conduct normal maintenance procedures. Leakage of pipelines in arctic subsea environment can have severe consequences. Leak detection and location identification in a timely manner is crucial because of the economic impact of a hydrocarbon spill to its stakeholders can be huge. Pipeline leakage could have an adverse impact on life, the environment, the economy and corporate reputation. It is imperative to take additional precautions while operating in the subsea regions, so rapid leak detection and location identification is crucially important. In this paper, a numerical modeling of a subsea pipeline leakage is performed using a 3-D turbulent flow model in computational fluid dynamics (CFD). Four different types of fluids are tested in this study, with specified operating conditions. It is difficult to conduct small-scale experiments on subsea pipeline with leakage, mainly because; the pipeline may need to release hydrocarbons to the environment. Further, since the industrial full-scale pipeline is large in diameter, fluid thermodynamics cannot be captured accurately in a small-scale, laboratory environment. Thus, a numerical simulation can provide a better understanding of pipeline internal flow and the consequences of pipeline leaks in different scales, reducing the cost and number of experiments. Commercially available ANSYS (FLUENT) computational fluid dynamics software is used to serve this purpose. ANSYS workbench provides integrated design, meshing technology, and large degree of freedom for pre- and post-processing for the fluid flow simulation in pipeline. The CFD simulation results in this study showed that the flow rate of the fluid escaping from the leak increases with pipeline operating pressure. The static pressure and pressure gradient along the axial length of the pipeline have observed a sharp signature variation near the leak orifice. This signature has been captured using pressure gradient curves. The temperature profiles near leak orifice indicate that the temperature is observed to increase slightly in the case of incompressible fluids; however, temperature drops rapidly for the compressible fluids. Transient simulation is performed to obtain the acoustic signature of the pipe near leak orifice. The power spectral density (PSD) signal is strong near the leak orifice and it dissipates as the distance and orientation from the leak orifice increase. The high-pressure fluid flow generates more noise than the low-pressure fluid flow. In order to model the turbulence large eddy simulation (LES) used and Ffowcs-Williams and Hawking (FW-H) model in FLUENT was activated to generate acoustic data. Time step of the simulation was selected At = 0.0005 s and the number of simulation 20000 to get higher frequency noise signal.

UR - http://www.scopus.com/inward/record.url?scp=85050894029&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050894029&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9781510835801

BT - Arctic Technology Conference 2016

PB - Offshore Technology Conference

ER -