Blind channel identification and equalization with modulation-induced cyclostationarity

Erchin Serpedin, Georgios B. Giannakis

Research output: Contribution to journalArticle

104 Citations (Scopus)

Abstract

Recent results have pointed out the importance of inducing cyclostationarity at the transmitter for blind identification and equalization of communication channels. This paper addresses blind channel identification and equalization relying on the modulation induced cyclostationarity, without introducing redundancy at the transmitter. It is shown that single-input singleoutput channels can be identified uniquely from output secondorder cyclic statistics, irrespective of the location of channel zeros, color of additive stationary noise, or channel order overestimation errors, provided that the period of modulation-induced cyclostationarity is greater than half the channel length. Linear, closed-form, nonlinear correlation matching, and subspace-based approaches are developed for channel estimation and are tested using simulations. Necessary and sufficient blind channel identifiability conditions are presented. A Wiener cyclic equalizer is also proposed.

Original languageEnglish
Pages (from-to)1930-1944
Number of pages15
JournalIEEE Transactions on Signal Processing
Volume46
Issue number7
DOIs
Publication statusPublished - 1998
Externally publishedYes

Fingerprint

Transmitters
Modulation
Additive noise
Equalizers
Channel estimation
Redundancy
Statistics
Color

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Signal Processing

Cite this

Blind channel identification and equalization with modulation-induced cyclostationarity. / Serpedin, Erchin; Giannakis, Georgios B.

In: IEEE Transactions on Signal Processing, Vol. 46, No. 7, 1998, p. 1930-1944.

Research output: Contribution to journalArticle

@article{9de751a2741e4575b72843286111d689,
title = "Blind channel identification and equalization with modulation-induced cyclostationarity",
abstract = "Recent results have pointed out the importance of inducing cyclostationarity at the transmitter for blind identification and equalization of communication channels. This paper addresses blind channel identification and equalization relying on the modulation induced cyclostationarity, without introducing redundancy at the transmitter. It is shown that single-input singleoutput channels can be identified uniquely from output secondorder cyclic statistics, irrespective of the location of channel zeros, color of additive stationary noise, or channel order overestimation errors, provided that the period of modulation-induced cyclostationarity is greater than half the channel length. Linear, closed-form, nonlinear correlation matching, and subspace-based approaches are developed for channel estimation and are tested using simulations. Necessary and sufficient blind channel identifiability conditions are presented. A Wiener cyclic equalizer is also proposed.",
author = "Erchin Serpedin and Giannakis, {Georgios B.}",
year = "1998",
doi = "10.1109/78.700965",
language = "English",
volume = "46",
pages = "1930--1944",
journal = "IEEE Transactions on Signal Processing",
issn = "1053-587X",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "7",

}

TY - JOUR

T1 - Blind channel identification and equalization with modulation-induced cyclostationarity

AU - Serpedin, Erchin

AU - Giannakis, Georgios B.

PY - 1998

Y1 - 1998

N2 - Recent results have pointed out the importance of inducing cyclostationarity at the transmitter for blind identification and equalization of communication channels. This paper addresses blind channel identification and equalization relying on the modulation induced cyclostationarity, without introducing redundancy at the transmitter. It is shown that single-input singleoutput channels can be identified uniquely from output secondorder cyclic statistics, irrespective of the location of channel zeros, color of additive stationary noise, or channel order overestimation errors, provided that the period of modulation-induced cyclostationarity is greater than half the channel length. Linear, closed-form, nonlinear correlation matching, and subspace-based approaches are developed for channel estimation and are tested using simulations. Necessary and sufficient blind channel identifiability conditions are presented. A Wiener cyclic equalizer is also proposed.

AB - Recent results have pointed out the importance of inducing cyclostationarity at the transmitter for blind identification and equalization of communication channels. This paper addresses blind channel identification and equalization relying on the modulation induced cyclostationarity, without introducing redundancy at the transmitter. It is shown that single-input singleoutput channels can be identified uniquely from output secondorder cyclic statistics, irrespective of the location of channel zeros, color of additive stationary noise, or channel order overestimation errors, provided that the period of modulation-induced cyclostationarity is greater than half the channel length. Linear, closed-form, nonlinear correlation matching, and subspace-based approaches are developed for channel estimation and are tested using simulations. Necessary and sufficient blind channel identifiability conditions are presented. A Wiener cyclic equalizer is also proposed.

UR - http://www.scopus.com/inward/record.url?scp=0032124115&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032124115&partnerID=8YFLogxK

U2 - 10.1109/78.700965

DO - 10.1109/78.700965

M3 - Article

AN - SCOPUS:0032124115

VL - 46

SP - 1930

EP - 1944

JO - IEEE Transactions on Signal Processing

JF - IEEE Transactions on Signal Processing

SN - 1053-587X

IS - 7

ER -