Arrester-less DC fault current limiter based on pre-charged external capacitors for half-bridge modular multilevel converters

Ahmed A. Elserougi, Ahmed M. Massoud, Shehab Ahmed

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

The half-bridge modular multilevel converter (HB-MMC) is one of the most promising topologies for high-voltage direct current (HVDC) systems. Unlike full-bridge MMC (FB-MMC) and clamp double sub-module MMC (CDSM-MMC), HB-MMCs are defenceless against DC side faults. Different types of DC circuit breakers (DC CBs) assisted with arrester banks/damping resistors such as solid-state CB and hybrid DC CBs can be used to interrupt the DC fault current. Arrester banks are used to protect against overvoltage after interrupting the fault current and in turn to demagnetise the circuit inductors. The main disadvantage of the arresters is that they forcibly break apart when they are overloaded. In this study, an arrester-less fault current limiter is proposed for HB-MMC configuration, which provides an opposing voltage during the DC side fault. This is achieved by inserting external pre-charged capacitors in the DC current path during the fault. The selection of these external capacitors, their suitable initial voltages, and their charging stations are also presented in this study. A comparison between the proposed scheme and the CDSM-MMC has been held as well. The proposed protection scheme is assessed using a simulation study for a point-to-point nine-level HB-MMC-based HVDC system.

Original languageEnglish
Pages (from-to)93-101
Number of pages9
JournalIET Generation, Transmission and Distribution
Volume11
Issue number1
DOIs
Publication statusPublished - 5 Jan 2017

Fingerprint

Fault current limiters
Capacitors
Electric fault currents
Electric circuit breakers
Electric potential
Clamping devices
Resistors
Damping
Topology
Networks (circuits)

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Arrester-less DC fault current limiter based on pre-charged external capacitors for half-bridge modular multilevel converters. / Elserougi, Ahmed A.; Massoud, Ahmed M.; Ahmed, Shehab.

In: IET Generation, Transmission and Distribution, Vol. 11, No. 1, 05.01.2017, p. 93-101.

Research output: Contribution to journalArticle

@article{b737b8491b9b41eda119ffbebf5fb47d,
title = "Arrester-less DC fault current limiter based on pre-charged external capacitors for half-bridge modular multilevel converters",
abstract = "The half-bridge modular multilevel converter (HB-MMC) is one of the most promising topologies for high-voltage direct current (HVDC) systems. Unlike full-bridge MMC (FB-MMC) and clamp double sub-module MMC (CDSM-MMC), HB-MMCs are defenceless against DC side faults. Different types of DC circuit breakers (DC CBs) assisted with arrester banks/damping resistors such as solid-state CB and hybrid DC CBs can be used to interrupt the DC fault current. Arrester banks are used to protect against overvoltage after interrupting the fault current and in turn to demagnetise the circuit inductors. The main disadvantage of the arresters is that they forcibly break apart when they are overloaded. In this study, an arrester-less fault current limiter is proposed for HB-MMC configuration, which provides an opposing voltage during the DC side fault. This is achieved by inserting external pre-charged capacitors in the DC current path during the fault. The selection of these external capacitors, their suitable initial voltages, and their charging stations are also presented in this study. A comparison between the proposed scheme and the CDSM-MMC has been held as well. The proposed protection scheme is assessed using a simulation study for a point-to-point nine-level HB-MMC-based HVDC system.",
author = "Elserougi, {Ahmed A.} and Massoud, {Ahmed M.} and Shehab Ahmed",
year = "2017",
month = "1",
day = "5",
doi = "10.1049/iet-gtd.2016.0542",
language = "English",
volume = "11",
pages = "93--101",
journal = "IET Generation, Transmission and Distribution",
issn = "1751-8687",
publisher = "Institution of Engineering and Technology",
number = "1",

}

TY - JOUR

T1 - Arrester-less DC fault current limiter based on pre-charged external capacitors for half-bridge modular multilevel converters

AU - Elserougi, Ahmed A.

AU - Massoud, Ahmed M.

AU - Ahmed, Shehab

PY - 2017/1/5

Y1 - 2017/1/5

N2 - The half-bridge modular multilevel converter (HB-MMC) is one of the most promising topologies for high-voltage direct current (HVDC) systems. Unlike full-bridge MMC (FB-MMC) and clamp double sub-module MMC (CDSM-MMC), HB-MMCs are defenceless against DC side faults. Different types of DC circuit breakers (DC CBs) assisted with arrester banks/damping resistors such as solid-state CB and hybrid DC CBs can be used to interrupt the DC fault current. Arrester banks are used to protect against overvoltage after interrupting the fault current and in turn to demagnetise the circuit inductors. The main disadvantage of the arresters is that they forcibly break apart when they are overloaded. In this study, an arrester-less fault current limiter is proposed for HB-MMC configuration, which provides an opposing voltage during the DC side fault. This is achieved by inserting external pre-charged capacitors in the DC current path during the fault. The selection of these external capacitors, their suitable initial voltages, and their charging stations are also presented in this study. A comparison between the proposed scheme and the CDSM-MMC has been held as well. The proposed protection scheme is assessed using a simulation study for a point-to-point nine-level HB-MMC-based HVDC system.

AB - The half-bridge modular multilevel converter (HB-MMC) is one of the most promising topologies for high-voltage direct current (HVDC) systems. Unlike full-bridge MMC (FB-MMC) and clamp double sub-module MMC (CDSM-MMC), HB-MMCs are defenceless against DC side faults. Different types of DC circuit breakers (DC CBs) assisted with arrester banks/damping resistors such as solid-state CB and hybrid DC CBs can be used to interrupt the DC fault current. Arrester banks are used to protect against overvoltage after interrupting the fault current and in turn to demagnetise the circuit inductors. The main disadvantage of the arresters is that they forcibly break apart when they are overloaded. In this study, an arrester-less fault current limiter is proposed for HB-MMC configuration, which provides an opposing voltage during the DC side fault. This is achieved by inserting external pre-charged capacitors in the DC current path during the fault. The selection of these external capacitors, their suitable initial voltages, and their charging stations are also presented in this study. A comparison between the proposed scheme and the CDSM-MMC has been held as well. The proposed protection scheme is assessed using a simulation study for a point-to-point nine-level HB-MMC-based HVDC system.

UR - http://www.scopus.com/inward/record.url?scp=85009404039&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85009404039&partnerID=8YFLogxK

U2 - 10.1049/iet-gtd.2016.0542

DO - 10.1049/iet-gtd.2016.0542

M3 - Article

AN - SCOPUS:85009404039

VL - 11

SP - 93

EP - 101

JO - IET Generation, Transmission and Distribution

JF - IET Generation, Transmission and Distribution

SN - 1751-8687

IS - 1

ER -