Application of speed and load torque observers in high speed train

Jaroslaw Guzinski, Marc Diguet, Zbigniew Krzeminski, Arkadiusz Lewicki, Haitham Abu-Rub

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This paper presents a solution for observer based diagnostic system in high speed train with induction motor. The concept of the diagnostic system is dedicated to the mechanical part of the drive. The system is monitoring both motor speed sensor and torque transmission system. In case of speed sensor fault the control system could be switched into sensorless mode. Monitoring of torque transmission system allows to limit the motor torque in case of serious problem and gives an information to maintenance center for testing the suspected gear. The proposed system was verified by simulation and in test bench for 1.2 MW rail induction motor.

Original languageEnglish
Title of host publication2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008
Pages1382-1389
Number of pages8
DOIs
Publication statusPublished - 2008
Event2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008 - Poznan, Poland
Duration: 1 Sep 20083 Sep 2008

Other

Other2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008
CountryPoland
CityPoznan
Period1/9/083/9/08

Fingerprint

Loads (forces)
Torque
Induction motors
Torque motors
Monitoring
Sensors
Rails
Gears
Control systems
Testing

Keywords

  • Diagnostics
  • Induction motor
  • Mechatronics
  • Rail vehicle
  • Sensorless control

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Guzinski, J., Diguet, M., Krzeminski, Z., Lewicki, A., & Abu-Rub, H. (2008). Application of speed and load torque observers in high speed train. In 2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008 (pp. 1382-1389). [4635461] https://doi.org/10.1109/EPEPEMC.2008.4635461

Application of speed and load torque observers in high speed train. / Guzinski, Jaroslaw; Diguet, Marc; Krzeminski, Zbigniew; Lewicki, Arkadiusz; Abu-Rub, Haitham.

2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008. 2008. p. 1382-1389 4635461.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Guzinski, J, Diguet, M, Krzeminski, Z, Lewicki, A & Abu-Rub, H 2008, Application of speed and load torque observers in high speed train. in 2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008., 4635461, pp. 1382-1389, 2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008, Poznan, Poland, 1/9/08. https://doi.org/10.1109/EPEPEMC.2008.4635461
Guzinski J, Diguet M, Krzeminski Z, Lewicki A, Abu-Rub H. Application of speed and load torque observers in high speed train. In 2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008. 2008. p. 1382-1389. 4635461 https://doi.org/10.1109/EPEPEMC.2008.4635461
Guzinski, Jaroslaw ; Diguet, Marc ; Krzeminski, Zbigniew ; Lewicki, Arkadiusz ; Abu-Rub, Haitham. / Application of speed and load torque observers in high speed train. 2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008. 2008. pp. 1382-1389
@inproceedings{e5ff81f5e91146b7822958475c4e7dff,
title = "Application of speed and load torque observers in high speed train",
abstract = "This paper presents a solution for observer based diagnostic system in high speed train with induction motor. The concept of the diagnostic system is dedicated to the mechanical part of the drive. The system is monitoring both motor speed sensor and torque transmission system. In case of speed sensor fault the control system could be switched into sensorless mode. Monitoring of torque transmission system allows to limit the motor torque in case of serious problem and gives an information to maintenance center for testing the suspected gear. The proposed system was verified by simulation and in test bench for 1.2 MW rail induction motor.",
keywords = "Diagnostics, Induction motor, Mechatronics, Rail vehicle, Sensorless control",
author = "Jaroslaw Guzinski and Marc Diguet and Zbigniew Krzeminski and Arkadiusz Lewicki and Haitham Abu-Rub",
year = "2008",
doi = "10.1109/EPEPEMC.2008.4635461",
language = "English",
isbn = "9781424417421",
pages = "1382--1389",
booktitle = "2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008",

}

TY - GEN

T1 - Application of speed and load torque observers in high speed train

AU - Guzinski, Jaroslaw

AU - Diguet, Marc

AU - Krzeminski, Zbigniew

AU - Lewicki, Arkadiusz

AU - Abu-Rub, Haitham

PY - 2008

Y1 - 2008

N2 - This paper presents a solution for observer based diagnostic system in high speed train with induction motor. The concept of the diagnostic system is dedicated to the mechanical part of the drive. The system is monitoring both motor speed sensor and torque transmission system. In case of speed sensor fault the control system could be switched into sensorless mode. Monitoring of torque transmission system allows to limit the motor torque in case of serious problem and gives an information to maintenance center for testing the suspected gear. The proposed system was verified by simulation and in test bench for 1.2 MW rail induction motor.

AB - This paper presents a solution for observer based diagnostic system in high speed train with induction motor. The concept of the diagnostic system is dedicated to the mechanical part of the drive. The system is monitoring both motor speed sensor and torque transmission system. In case of speed sensor fault the control system could be switched into sensorless mode. Monitoring of torque transmission system allows to limit the motor torque in case of serious problem and gives an information to maintenance center for testing the suspected gear. The proposed system was verified by simulation and in test bench for 1.2 MW rail induction motor.

KW - Diagnostics

KW - Induction motor

KW - Mechatronics

KW - Rail vehicle

KW - Sensorless control

UR - http://www.scopus.com/inward/record.url?scp=56449121736&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=56449121736&partnerID=8YFLogxK

U2 - 10.1109/EPEPEMC.2008.4635461

DO - 10.1109/EPEPEMC.2008.4635461

M3 - Conference contribution

AN - SCOPUS:56449121736

SN - 9781424417421

SP - 1382

EP - 1389

BT - 2008 13th International Power Electronics and Motion Control Conference, EPE-PEMC 2008

ER -