Advanced current regulated PWM inverter with simplified load model

Jaroslaw Guzinski, Z. Krzeminski, Haitham Abu-Rub

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

In the article, a new stator current controller for voltage source inverter is presented. The proposed controller is based on back-emf calculation and applied to induction motors. The controller sensitivity to load parameters is discussed. The proposed controller is based on the model of inverter load with inductance and back-emf. Load resistance is neglected assuming that switching period is small enough that the average voltage drop across the resistance may be included in the back-emf. Constant switching frequency is used in the proposed system. The controller is realized in simulation and experimentally using fixed-point digital signal processor (DSP) and programmable field programmable gate arrays (FPGA).

Original languageEnglish
Pages (from-to)1031-1042
Number of pages12
JournalElectric Power Components and Systems
Volume32
Issue number10
DOIs
Publication statusPublished - Oct 2004
Externally publishedYes

Fingerprint

Pulse width modulation
Controllers
Electric potential
Digital signal processors
Switching frequency
Inductance
Induction motors
Stators
Field programmable gate arrays (FPGA)

Keywords

  • Current controller
  • DSP
  • FPGA
  • Pulse width modulation
  • Voltage inverter

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Advanced current regulated PWM inverter with simplified load model. / Guzinski, Jaroslaw; Krzeminski, Z.; Abu-Rub, Haitham.

In: Electric Power Components and Systems, Vol. 32, No. 10, 10.2004, p. 1031-1042.

Research output: Contribution to journalArticle

Guzinski, Jaroslaw ; Krzeminski, Z. ; Abu-Rub, Haitham. / Advanced current regulated PWM inverter with simplified load model. In: Electric Power Components and Systems. 2004 ; Vol. 32, No. 10. pp. 1031-1042.
@article{65d95bbf569d40058a322c584a72dd1e,
title = "Advanced current regulated PWM inverter with simplified load model",
abstract = "In the article, a new stator current controller for voltage source inverter is presented. The proposed controller is based on back-emf calculation and applied to induction motors. The controller sensitivity to load parameters is discussed. The proposed controller is based on the model of inverter load with inductance and back-emf. Load resistance is neglected assuming that switching period is small enough that the average voltage drop across the resistance may be included in the back-emf. Constant switching frequency is used in the proposed system. The controller is realized in simulation and experimentally using fixed-point digital signal processor (DSP) and programmable field programmable gate arrays (FPGA).",
keywords = "Current controller, DSP, FPGA, Pulse width modulation, Voltage inverter",
author = "Jaroslaw Guzinski and Z. Krzeminski and Haitham Abu-Rub",
year = "2004",
month = "10",
doi = "10.1080/15325000490257818",
language = "English",
volume = "32",
pages = "1031--1042",
journal = "Electric Power Components and Systems",
issn = "1532-5008",
publisher = "Taylor and Francis Ltd.",
number = "10",

}

TY - JOUR

T1 - Advanced current regulated PWM inverter with simplified load model

AU - Guzinski, Jaroslaw

AU - Krzeminski, Z.

AU - Abu-Rub, Haitham

PY - 2004/10

Y1 - 2004/10

N2 - In the article, a new stator current controller for voltage source inverter is presented. The proposed controller is based on back-emf calculation and applied to induction motors. The controller sensitivity to load parameters is discussed. The proposed controller is based on the model of inverter load with inductance and back-emf. Load resistance is neglected assuming that switching period is small enough that the average voltage drop across the resistance may be included in the back-emf. Constant switching frequency is used in the proposed system. The controller is realized in simulation and experimentally using fixed-point digital signal processor (DSP) and programmable field programmable gate arrays (FPGA).

AB - In the article, a new stator current controller for voltage source inverter is presented. The proposed controller is based on back-emf calculation and applied to induction motors. The controller sensitivity to load parameters is discussed. The proposed controller is based on the model of inverter load with inductance and back-emf. Load resistance is neglected assuming that switching period is small enough that the average voltage drop across the resistance may be included in the back-emf. Constant switching frequency is used in the proposed system. The controller is realized in simulation and experimentally using fixed-point digital signal processor (DSP) and programmable field programmable gate arrays (FPGA).

KW - Current controller

KW - DSP

KW - FPGA

KW - Pulse width modulation

KW - Voltage inverter

UR - http://www.scopus.com/inward/record.url?scp=4644266133&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4644266133&partnerID=8YFLogxK

U2 - 10.1080/15325000490257818

DO - 10.1080/15325000490257818

M3 - Article

AN - SCOPUS:4644266133

VL - 32

SP - 1031

EP - 1042

JO - Electric Power Components and Systems

JF - Electric Power Components and Systems

SN - 1532-5008

IS - 10

ER -