Activation studies with a promoted precipitated iron Fischer-Tropsch catalyst

Dragomir Bukur, Xiaosu Lang, Joseph A. Rossin, William H. Zimmerman, Michael P. Rosynek, Eshan B. Yeh, Chiuping Li

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

The effect of reductant type (CO, H2, or H2/CO = 0.68), activation temperature (250, 280, and 310 °C), duration (8 and 24 h), and pressure (0.1 and 1.48 MPa) on the activity and selectivity of a promoted precipitated iron catalyst (100Fe/3Cu/0.2K) was studied in a fixed bed reactor. It was found that activation parameters have a strong effect on the catalyst behaviour during Fischer-Tropsch (FT) synthesis at 250°C, 1.48 MPa, 2 nL/g of catalyst/h, and H2/CO = 1. Activations in CO led to catalysts that had higher initial activity and better selectivity (less methane and other light hydrocarbons) than H2 activated catalysts. However, the activity of CO-reduced catalysts declined with time on stream, whereas the activity of H2-reduced catalysts remained constant or increased during 120 h of testing.

Original languageEnglish
Pages (from-to)1130-1140
Number of pages11
JournalIndustrial and Engineering Chemistry Research
Volumev
Issue numbern
Publication statusPublished - 1 Jan 1992

    Fingerprint

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering

Cite this

Bukur, D., Lang, X., Rossin, J. A., Zimmerman, W. H., Rosynek, M. P., Yeh, E. B., & Li, C. (1992). Activation studies with a promoted precipitated iron Fischer-Tropsch catalyst. Industrial and Engineering Chemistry Research, v(n), 1130-1140.