A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter

H. M. El-Deeb, A. Elserougi, Ayman Abdel-Khalik, Shehab Ahmed, A. M. Massoud

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Due to the large variety of renewable power sources, power electronics play an important role in energy conversion. Different power converter topologies are used to interface distributed power generation systems (DPGS) with the utility network. Introduction of power electronics for DPGS provide several advantages such as energy optimal operation by employing a control algorithm to extract the maximum available power. In addition, load control, reduced noise, controllable active and reactive power and improved power quality. Using a LCL filter to ensure that high quality power is delivered comes at the expense of degraded stability unless mitigation procedures are followed. In this paper, a stationary frame current control for inverter-based distributed generation (IBDG) with sensorless active damped LCL filter is proposed. The Kalman filter sensorless-based technique not only mitigates the stability problem regarding the resonance of the LCL filter, but it improves the overall stability margins. The concluded assumptions were simulated through Matlab/Simulink and verified experimentally with a laboratory prototype.

Original languageEnglish
Title of host publicationProceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1981-1986
Number of pages6
ISBN (Print)9781479923991
DOIs
Publication statusPublished - 2014
Event2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014 - Istanbul, Turkey
Duration: 1 Jun 20144 Jun 2014

Other

Other2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014
CountryTurkey
CityIstanbul
Period1/6/144/6/14

Fingerprint

Distributed power generation
Electric current control
Kalman filters
Power quality
Power electronics
Power converters
Reactive power
Energy conversion
Topology

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Cite this

El-Deeb, H. M., Elserougi, A., Abdel-Khalik, A., Ahmed, S., & Massoud, A. M. (2014). A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter. In Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014 (pp. 1981-1986). [6864920] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISIE.2014.6864920

A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter. / El-Deeb, H. M.; Elserougi, A.; Abdel-Khalik, Ayman; Ahmed, Shehab; Massoud, A. M.

Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. p. 1981-1986 6864920.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

El-Deeb, HM, Elserougi, A, Abdel-Khalik, A, Ahmed, S & Massoud, AM 2014, A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter. in Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014., 6864920, Institute of Electrical and Electronics Engineers Inc., pp. 1981-1986, 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014, Istanbul, Turkey, 1/6/14. https://doi.org/10.1109/ISIE.2014.6864920
El-Deeb HM, Elserougi A, Abdel-Khalik A, Ahmed S, Massoud AM. A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter. In Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 1981-1986. 6864920 https://doi.org/10.1109/ISIE.2014.6864920
El-Deeb, H. M. ; Elserougi, A. ; Abdel-Khalik, Ayman ; Ahmed, Shehab ; Massoud, A. M. / A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter. Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 1981-1986
@inproceedings{165fd882ca1c4059a1da327c354b8013,
title = "A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter",
abstract = "Due to the large variety of renewable power sources, power electronics play an important role in energy conversion. Different power converter topologies are used to interface distributed power generation systems (DPGS) with the utility network. Introduction of power electronics for DPGS provide several advantages such as energy optimal operation by employing a control algorithm to extract the maximum available power. In addition, load control, reduced noise, controllable active and reactive power and improved power quality. Using a LCL filter to ensure that high quality power is delivered comes at the expense of degraded stability unless mitigation procedures are followed. In this paper, a stationary frame current control for inverter-based distributed generation (IBDG) with sensorless active damped LCL filter is proposed. The Kalman filter sensorless-based technique not only mitigates the stability problem regarding the resonance of the LCL filter, but it improves the overall stability margins. The concluded assumptions were simulated through Matlab/Simulink and verified experimentally with a laboratory prototype.",
author = "El-Deeb, {H. M.} and A. Elserougi and Ayman Abdel-Khalik and Shehab Ahmed and Massoud, {A. M.}",
year = "2014",
doi = "10.1109/ISIE.2014.6864920",
language = "English",
isbn = "9781479923991",
pages = "1981--1986",
booktitle = "Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter

AU - El-Deeb, H. M.

AU - Elserougi, A.

AU - Abdel-Khalik, Ayman

AU - Ahmed, Shehab

AU - Massoud, A. M.

PY - 2014

Y1 - 2014

N2 - Due to the large variety of renewable power sources, power electronics play an important role in energy conversion. Different power converter topologies are used to interface distributed power generation systems (DPGS) with the utility network. Introduction of power electronics for DPGS provide several advantages such as energy optimal operation by employing a control algorithm to extract the maximum available power. In addition, load control, reduced noise, controllable active and reactive power and improved power quality. Using a LCL filter to ensure that high quality power is delivered comes at the expense of degraded stability unless mitigation procedures are followed. In this paper, a stationary frame current control for inverter-based distributed generation (IBDG) with sensorless active damped LCL filter is proposed. The Kalman filter sensorless-based technique not only mitigates the stability problem regarding the resonance of the LCL filter, but it improves the overall stability margins. The concluded assumptions were simulated through Matlab/Simulink and verified experimentally with a laboratory prototype.

AB - Due to the large variety of renewable power sources, power electronics play an important role in energy conversion. Different power converter topologies are used to interface distributed power generation systems (DPGS) with the utility network. Introduction of power electronics for DPGS provide several advantages such as energy optimal operation by employing a control algorithm to extract the maximum available power. In addition, load control, reduced noise, controllable active and reactive power and improved power quality. Using a LCL filter to ensure that high quality power is delivered comes at the expense of degraded stability unless mitigation procedures are followed. In this paper, a stationary frame current control for inverter-based distributed generation (IBDG) with sensorless active damped LCL filter is proposed. The Kalman filter sensorless-based technique not only mitigates the stability problem regarding the resonance of the LCL filter, but it improves the overall stability margins. The concluded assumptions were simulated through Matlab/Simulink and verified experimentally with a laboratory prototype.

UR - http://www.scopus.com/inward/record.url?scp=84907379517&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84907379517&partnerID=8YFLogxK

U2 - 10.1109/ISIE.2014.6864920

DO - 10.1109/ISIE.2014.6864920

M3 - Conference contribution

AN - SCOPUS:84907379517

SN - 9781479923991

SP - 1981

EP - 1986

BT - Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014

PB - Institute of Electrical and Electronics Engineers Inc.

ER -