A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines

M. S. Diab, A. Elserougi, Ayman Abdel-Khalik, A. M. Massoud, Shehab Ahmed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The interest in multiphase drives has been steadily growing during the last decade due to the promising potentials offered by multiphase machines over conventional three-phase counterpart. In this context, six-phase induction machines are preferably used in many diversified high-power applications. Generally, thanks to its improved flux distribution, the asymmetrical six-phase winding topology fed from two three-phase voltage source inverters (VSIs) is commonly employed with isolated neutral points to prevent the flow of zero sequence currents and to limit the number of current controllers to four instead of five when neutral points are connected. In this paper, an innovative design of a six-phase dc-ac inverter is proposed for such type of six-phase ac machines based on the single-ended primary-inductance converter (SEPIC) topology. The proposed topology employs only four active-legs with eight switches with the same output voltage magnitudes as in conventional VSIs and without the mandatory dead-time between switches in the same-leg. Also, it naturally delivers a pure sinusoidal waveform at the output stage. The principle of operation of the proposed inverter topology is investigated in details and assessed through a detailed simulation study of an open-loop control system.

Original languageEnglish
Title of host publicationIECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages990-995
Number of pages6
ISBN (Electronic)9781479917624
DOIs
Publication statusPublished - 25 Jan 2016
Event41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015 - Yokohama, Japan
Duration: 9 Nov 201512 Nov 2015

Other

Other41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015
CountryJapan
CityYokohama
Period9/11/1512/11/15

Fingerprint

Inductance
Switches
Topology
Electric potential
Time switches
Fluxes
Control systems
Controllers

Keywords

  • asymmetrical dual three-phase induction machines
  • induction machines
  • Multiphase
  • reduced switch-count converters
  • SEPIC
  • six-phase drives

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering

Cite this

Diab, M. S., Elserougi, A., Abdel-Khalik, A., Massoud, A. M., & Ahmed, S. (2016). A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines. In IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society (pp. 990-995). [7392228] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IECON.2015.7392228

A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines. / Diab, M. S.; Elserougi, A.; Abdel-Khalik, Ayman; Massoud, A. M.; Ahmed, Shehab.

IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 2016. p. 990-995 7392228.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diab, MS, Elserougi, A, Abdel-Khalik, A, Massoud, AM & Ahmed, S 2016, A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines. in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society., 7392228, Institute of Electrical and Electronics Engineers Inc., pp. 990-995, 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 9/11/15. https://doi.org/10.1109/IECON.2015.7392228
Diab MS, Elserougi A, Abdel-Khalik A, Massoud AM, Ahmed S. A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines. In IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc. 2016. p. 990-995. 7392228 https://doi.org/10.1109/IECON.2015.7392228
Diab, M. S. ; Elserougi, A. ; Abdel-Khalik, Ayman ; Massoud, A. M. ; Ahmed, Shehab. / A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines. IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 990-995
@inproceedings{d06e2306ea1e4606a93041a47ce43a18,
title = "A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines",
abstract = "The interest in multiphase drives has been steadily growing during the last decade due to the promising potentials offered by multiphase machines over conventional three-phase counterpart. In this context, six-phase induction machines are preferably used in many diversified high-power applications. Generally, thanks to its improved flux distribution, the asymmetrical six-phase winding topology fed from two three-phase voltage source inverters (VSIs) is commonly employed with isolated neutral points to prevent the flow of zero sequence currents and to limit the number of current controllers to four instead of five when neutral points are connected. In this paper, an innovative design of a six-phase dc-ac inverter is proposed for such type of six-phase ac machines based on the single-ended primary-inductance converter (SEPIC) topology. The proposed topology employs only four active-legs with eight switches with the same output voltage magnitudes as in conventional VSIs and without the mandatory dead-time between switches in the same-leg. Also, it naturally delivers a pure sinusoidal waveform at the output stage. The principle of operation of the proposed inverter topology is investigated in details and assessed through a detailed simulation study of an open-loop control system.",
keywords = "asymmetrical dual three-phase induction machines, induction machines, Multiphase, reduced switch-count converters, SEPIC, six-phase drives",
author = "Diab, {M. S.} and A. Elserougi and Ayman Abdel-Khalik and Massoud, {A. M.} and Shehab Ahmed",
year = "2016",
month = "1",
day = "25",
doi = "10.1109/IECON.2015.7392228",
language = "English",
pages = "990--995",
booktitle = "IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - A reduced switch-count SEPIC-based inverter for asymmetrical dual three-phase induction machines

AU - Diab, M. S.

AU - Elserougi, A.

AU - Abdel-Khalik, Ayman

AU - Massoud, A. M.

AU - Ahmed, Shehab

PY - 2016/1/25

Y1 - 2016/1/25

N2 - The interest in multiphase drives has been steadily growing during the last decade due to the promising potentials offered by multiphase machines over conventional three-phase counterpart. In this context, six-phase induction machines are preferably used in many diversified high-power applications. Generally, thanks to its improved flux distribution, the asymmetrical six-phase winding topology fed from two three-phase voltage source inverters (VSIs) is commonly employed with isolated neutral points to prevent the flow of zero sequence currents and to limit the number of current controllers to four instead of five when neutral points are connected. In this paper, an innovative design of a six-phase dc-ac inverter is proposed for such type of six-phase ac machines based on the single-ended primary-inductance converter (SEPIC) topology. The proposed topology employs only four active-legs with eight switches with the same output voltage magnitudes as in conventional VSIs and without the mandatory dead-time between switches in the same-leg. Also, it naturally delivers a pure sinusoidal waveform at the output stage. The principle of operation of the proposed inverter topology is investigated in details and assessed through a detailed simulation study of an open-loop control system.

AB - The interest in multiphase drives has been steadily growing during the last decade due to the promising potentials offered by multiphase machines over conventional three-phase counterpart. In this context, six-phase induction machines are preferably used in many diversified high-power applications. Generally, thanks to its improved flux distribution, the asymmetrical six-phase winding topology fed from two three-phase voltage source inverters (VSIs) is commonly employed with isolated neutral points to prevent the flow of zero sequence currents and to limit the number of current controllers to four instead of five when neutral points are connected. In this paper, an innovative design of a six-phase dc-ac inverter is proposed for such type of six-phase ac machines based on the single-ended primary-inductance converter (SEPIC) topology. The proposed topology employs only four active-legs with eight switches with the same output voltage magnitudes as in conventional VSIs and without the mandatory dead-time between switches in the same-leg. Also, it naturally delivers a pure sinusoidal waveform at the output stage. The principle of operation of the proposed inverter topology is investigated in details and assessed through a detailed simulation study of an open-loop control system.

KW - asymmetrical dual three-phase induction machines

KW - induction machines

KW - Multiphase

KW - reduced switch-count converters

KW - SEPIC

KW - six-phase drives

UR - http://www.scopus.com/inward/record.url?scp=84973130023&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84973130023&partnerID=8YFLogxK

U2 - 10.1109/IECON.2015.7392228

DO - 10.1109/IECON.2015.7392228

M3 - Conference contribution

SP - 990

EP - 995

BT - IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society

PB - Institute of Electrical and Electronics Engineers Inc.

ER -