A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications

Pandav Kiran Maroti, Rashid Al-Ammari, Atif Iqbal, Lazhar Ben-Brahim, Sanjeevikumar Padmanaban, Haitham Abu-Rub

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.

Original languageEnglish
Title of host publicationProceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages2503-2508
Number of pages6
ISBN (Electronic)9781728136660
DOIs
Publication statusPublished - 1 Jun 2019
Event28th IEEE International Symposium on Industrial Electronics, ISIE 2019 - Vancouver, Canada
Duration: 12 Jun 201914 Jun 2019

Publication series

NameIEEE International Symposium on Industrial Electronics
Volume2019-June

Conference

Conference28th IEEE International Symposium on Industrial Electronics, ISIE 2019
CountryCanada
CityVancouver
Period12/6/1914/6/19

Fingerprint

Electric potential
Switching frequency
Fuel cells
Switches

Keywords

  • High Gain DC-DC Converter
  • Modified SEPIC Converter
  • Renewable Energy Application
  • Voltage Lift Switched Inductor

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Cite this

Maroti, P. K., Al-Ammari, R., Iqbal, A., Ben-Brahim, L., Padmanaban, S., & Abu-Rub, H. (2019). A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. In Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019 (pp. 2503-2508). [8781163] (IEEE International Symposium on Industrial Electronics; Vol. 2019-June). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISIE.2019.8781163

A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. / Maroti, Pandav Kiran; Al-Ammari, Rashid; Iqbal, Atif; Ben-Brahim, Lazhar; Padmanaban, Sanjeevikumar; Abu-Rub, Haitham.

Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019. Institute of Electrical and Electronics Engineers Inc., 2019. p. 2503-2508 8781163 (IEEE International Symposium on Industrial Electronics; Vol. 2019-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Maroti, PK, Al-Ammari, R, Iqbal, A, Ben-Brahim, L, Padmanaban, S & Abu-Rub, H 2019, A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. in Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019., 8781163, IEEE International Symposium on Industrial Electronics, vol. 2019-June, Institute of Electrical and Electronics Engineers Inc., pp. 2503-2508, 28th IEEE International Symposium on Industrial Electronics, ISIE 2019, Vancouver, Canada, 12/6/19. https://doi.org/10.1109/ISIE.2019.8781163
Maroti PK, Al-Ammari R, Iqbal A, Ben-Brahim L, Padmanaban S, Abu-Rub H. A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. In Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019. Institute of Electrical and Electronics Engineers Inc. 2019. p. 2503-2508. 8781163. (IEEE International Symposium on Industrial Electronics). https://doi.org/10.1109/ISIE.2019.8781163
Maroti, Pandav Kiran ; Al-Ammari, Rashid ; Iqbal, Atif ; Ben-Brahim, Lazhar ; Padmanaban, Sanjeevikumar ; Abu-Rub, Haitham. / A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 2503-2508 (IEEE International Symposium on Industrial Electronics).
@inproceedings{7ca98581979342d0b54ad77800da2bb9,
title = "A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications",
abstract = "A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.",
keywords = "High Gain DC-DC Converter, Modified SEPIC Converter, Renewable Energy Application, Voltage Lift Switched Inductor",
author = "Maroti, {Pandav Kiran} and Rashid Al-Ammari and Atif Iqbal and Lazhar Ben-Brahim and Sanjeevikumar Padmanaban and Haitham Abu-Rub",
year = "2019",
month = "6",
day = "1",
doi = "10.1109/ISIE.2019.8781163",
language = "English",
series = "IEEE International Symposium on Industrial Electronics",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "2503--2508",
booktitle = "Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019",

}

TY - GEN

T1 - A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications

AU - Maroti, Pandav Kiran

AU - Al-Ammari, Rashid

AU - Iqbal, Atif

AU - Ben-Brahim, Lazhar

AU - Padmanaban, Sanjeevikumar

AU - Abu-Rub, Haitham

PY - 2019/6/1

Y1 - 2019/6/1

N2 - A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.

AB - A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.

KW - High Gain DC-DC Converter

KW - Modified SEPIC Converter

KW - Renewable Energy Application

KW - Voltage Lift Switched Inductor

UR - http://www.scopus.com/inward/record.url?scp=85070618297&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070618297&partnerID=8YFLogxK

U2 - 10.1109/ISIE.2019.8781163

DO - 10.1109/ISIE.2019.8781163

M3 - Conference contribution

T3 - IEEE International Symposium on Industrial Electronics

SP - 2503

EP - 2508

BT - Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019

PB - Institute of Electrical and Electronics Engineers Inc.

ER -