A new model to describe formation damage during particle movement and deposition in porous media

J. Moghadasi, A. Sharif, A. M. Kalantari-Dahaghi, E. Motaie

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Several investigators have studied formation damage due to invasion of solid suspensions and some modeling approaches have also been reported in the literature, most notably the application of effective medium theory and percolation theory in two and three-dimensional capillary networks. This paper presents a new model, which is based on mass balance transfer function of particles flowing through the porous media. The linear forms of the model are described as well as the radial forms. Although the differential equations derived are similar to the general form of diffusion-convection equations, the marked difference is the suitability of the model, for being applied for variation of parameters, such as particle concentration in the fluid, injection rate, density of solid particles, against the depth and time of invasion. This transfer function is solved by MATLAB program (Version 5.3.2) and SIMULINK software. The results of the simulation run agree reasonably well with the experimental damage data obtained in laboratory.

Original languageEnglish
Title of host publicationSociety of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas
Pages578-587
Number of pages10
Volume1
Publication statusPublished - 1 Dec 2006
Externally publishedYes
EventSociety of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas - Vienna, Austria
Duration: 12 Jun 200615 Jun 2006

Other

OtherSociety of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas
CountryAustria
CityVienna
Period12/6/0615/6/06

Fingerprint

Porous materials
Transfer functions
MATLAB
Differential equations
Fluids
Convection

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Moghadasi, J., Sharif, A., Kalantari-Dahaghi, A. M., & Motaie, E. (2006). A new model to describe formation damage during particle movement and deposition in porous media. In Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas (Vol. 1, pp. 578-587)

A new model to describe formation damage during particle movement and deposition in porous media. / Moghadasi, J.; Sharif, A.; Kalantari-Dahaghi, A. M.; Motaie, E.

Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas. Vol. 1 2006. p. 578-587.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Moghadasi, J, Sharif, A, Kalantari-Dahaghi, AM & Motaie, E 2006, A new model to describe formation damage during particle movement and deposition in porous media. in Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas. vol. 1, pp. 578-587, Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas, Vienna, Austria, 12/6/06.
Moghadasi J, Sharif A, Kalantari-Dahaghi AM, Motaie E. A new model to describe formation damage during particle movement and deposition in porous media. In Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas. Vol. 1. 2006. p. 578-587
Moghadasi, J. ; Sharif, A. ; Kalantari-Dahaghi, A. M. ; Motaie, E. / A new model to describe formation damage during particle movement and deposition in porous media. Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas. Vol. 1 2006. pp. 578-587
@inproceedings{7c267d74359b489e89fe64c81071d6f6,
title = "A new model to describe formation damage during particle movement and deposition in porous media",
abstract = "Several investigators have studied formation damage due to invasion of solid suspensions and some modeling approaches have also been reported in the literature, most notably the application of effective medium theory and percolation theory in two and three-dimensional capillary networks. This paper presents a new model, which is based on mass balance transfer function of particles flowing through the porous media. The linear forms of the model are described as well as the radial forms. Although the differential equations derived are similar to the general form of diffusion-convection equations, the marked difference is the suitability of the model, for being applied for variation of parameters, such as particle concentration in the fluid, injection rate, density of solid particles, against the depth and time of invasion. This transfer function is solved by MATLAB program (Version 5.3.2) and SIMULINK software. The results of the simulation run agree reasonably well with the experimental damage data obtained in laboratory.",
author = "J. Moghadasi and A. Sharif and Kalantari-Dahaghi, {A. M.} and E. Motaie",
year = "2006",
month = "12",
day = "1",
language = "English",
volume = "1",
pages = "578--587",
booktitle = "Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas",

}

TY - GEN

T1 - A new model to describe formation damage during particle movement and deposition in porous media

AU - Moghadasi, J.

AU - Sharif, A.

AU - Kalantari-Dahaghi, A. M.

AU - Motaie, E.

PY - 2006/12/1

Y1 - 2006/12/1

N2 - Several investigators have studied formation damage due to invasion of solid suspensions and some modeling approaches have also been reported in the literature, most notably the application of effective medium theory and percolation theory in two and three-dimensional capillary networks. This paper presents a new model, which is based on mass balance transfer function of particles flowing through the porous media. The linear forms of the model are described as well as the radial forms. Although the differential equations derived are similar to the general form of diffusion-convection equations, the marked difference is the suitability of the model, for being applied for variation of parameters, such as particle concentration in the fluid, injection rate, density of solid particles, against the depth and time of invasion. This transfer function is solved by MATLAB program (Version 5.3.2) and SIMULINK software. The results of the simulation run agree reasonably well with the experimental damage data obtained in laboratory.

AB - Several investigators have studied formation damage due to invasion of solid suspensions and some modeling approaches have also been reported in the literature, most notably the application of effective medium theory and percolation theory in two and three-dimensional capillary networks. This paper presents a new model, which is based on mass balance transfer function of particles flowing through the porous media. The linear forms of the model are described as well as the radial forms. Although the differential equations derived are similar to the general form of diffusion-convection equations, the marked difference is the suitability of the model, for being applied for variation of parameters, such as particle concentration in the fluid, injection rate, density of solid particles, against the depth and time of invasion. This transfer function is solved by MATLAB program (Version 5.3.2) and SIMULINK software. The results of the simulation run agree reasonably well with the experimental damage data obtained in laboratory.

UR - http://www.scopus.com/inward/record.url?scp=33947209995&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33947209995&partnerID=8YFLogxK

M3 - Conference contribution

VL - 1

SP - 578

EP - 587

BT - Society of Petroleum Engineers, 68th European Association of Geoscientists and Engineers Conference and Exhibition, incorporating SPE EUROPEC 2006, EAGE 2006: Opportunities in Mature Areas

ER -