A new five-phase to three-phase back-to-back current source converter based wind energy conversion system

M. A. Elgenedy, Ayman Abdel-Khalik, A. Elserougi, Shehab Ahmed, A. M. Massoud

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Wind energy is one of the fastest growing renewable energy sources. The increased penetration of wind power into the utility grid brings challenges such as voltage and frequency fluctuations, generator torque ripples, and grid faults to power converter design in wind energy conversion systems (WECSs). Multiphase PM generators offers a promising solution to many challenges due to their inherited advantages over the three phase counterparts including reduced converter per leg rating and reduced torque ripples, which directly affect the lifetime of the drive train. In high power applications, direct drive PM generators are usually employed. Among different topologies of power converters, current source converter features a simple converter structure, low switching dv/dt, and reliable short circuit protection. In this paper, a new wind energy conversion system is proposed based on a direct drive five-phase PMSG connected to the grid using current source converters (CSCs). The generator side converter, operating in the rectification mode (CSR), is controlled to control the DC-link current, while the grid side converter, operating in the inversion mode (CSI), controls the active and reactive powers injected to the grid. The five-phase generator side converter is controlled using sinusoidal pulse width modulation (SPWM), while conventional space vector modulation is employed to control the three-phase grid side. A 5 MW system with typical system data is simulated via MATLAB/SIMULINK to validate the proposed topology.

Original languageEnglish
Title of host publication2013 7th IEEE GCC Conference and Exhibition, GCC 2013
Pages193-198
Number of pages6
DOIs
Publication statusPublished - 2013
Event2013 7th IEEE GCC Conference and Exhibition, GCC 2013 - Doha, Qatar
Duration: 17 Nov 201320 Nov 2013

Other

Other2013 7th IEEE GCC Conference and Exhibition, GCC 2013
CountryQatar
CityDoha
Period17/11/1320/11/13

Fingerprint

Energy conversion
Wind power
Power converters
Torque
Topology
Vector spaces
Reactive power
Short circuit currents
Pulse width modulation
MATLAB
Modulation
Electric potential

Keywords

  • current source inverter (CSI)
  • Current source rectifier (CSR)
  • mapping circuit
  • multiphase machine
  • sinusoidal pulse width modulation (SPWM)
  • space vector pulse width modulation (SVPWM)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Elgenedy, M. A., Abdel-Khalik, A., Elserougi, A., Ahmed, S., & Massoud, A. M. (2013). A new five-phase to three-phase back-to-back current source converter based wind energy conversion system. In 2013 7th IEEE GCC Conference and Exhibition, GCC 2013 (pp. 193-198). [6705774] https://doi.org/10.1109/IEEEGCC.2013.6705774

A new five-phase to three-phase back-to-back current source converter based wind energy conversion system. / Elgenedy, M. A.; Abdel-Khalik, Ayman; Elserougi, A.; Ahmed, Shehab; Massoud, A. M.

2013 7th IEEE GCC Conference and Exhibition, GCC 2013. 2013. p. 193-198 6705774.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elgenedy, MA, Abdel-Khalik, A, Elserougi, A, Ahmed, S & Massoud, AM 2013, A new five-phase to three-phase back-to-back current source converter based wind energy conversion system. in 2013 7th IEEE GCC Conference and Exhibition, GCC 2013., 6705774, pp. 193-198, 2013 7th IEEE GCC Conference and Exhibition, GCC 2013, Doha, Qatar, 17/11/13. https://doi.org/10.1109/IEEEGCC.2013.6705774
Elgenedy MA, Abdel-Khalik A, Elserougi A, Ahmed S, Massoud AM. A new five-phase to three-phase back-to-back current source converter based wind energy conversion system. In 2013 7th IEEE GCC Conference and Exhibition, GCC 2013. 2013. p. 193-198. 6705774 https://doi.org/10.1109/IEEEGCC.2013.6705774
Elgenedy, M. A. ; Abdel-Khalik, Ayman ; Elserougi, A. ; Ahmed, Shehab ; Massoud, A. M. / A new five-phase to three-phase back-to-back current source converter based wind energy conversion system. 2013 7th IEEE GCC Conference and Exhibition, GCC 2013. 2013. pp. 193-198
@inproceedings{a420c2dc672e405d835333a34ffe37d7,
title = "A new five-phase to three-phase back-to-back current source converter based wind energy conversion system",
abstract = "Wind energy is one of the fastest growing renewable energy sources. The increased penetration of wind power into the utility grid brings challenges such as voltage and frequency fluctuations, generator torque ripples, and grid faults to power converter design in wind energy conversion systems (WECSs). Multiphase PM generators offers a promising solution to many challenges due to their inherited advantages over the three phase counterparts including reduced converter per leg rating and reduced torque ripples, which directly affect the lifetime of the drive train. In high power applications, direct drive PM generators are usually employed. Among different topologies of power converters, current source converter features a simple converter structure, low switching dv/dt, and reliable short circuit protection. In this paper, a new wind energy conversion system is proposed based on a direct drive five-phase PMSG connected to the grid using current source converters (CSCs). The generator side converter, operating in the rectification mode (CSR), is controlled to control the DC-link current, while the grid side converter, operating in the inversion mode (CSI), controls the active and reactive powers injected to the grid. The five-phase generator side converter is controlled using sinusoidal pulse width modulation (SPWM), while conventional space vector modulation is employed to control the three-phase grid side. A 5 MW system with typical system data is simulated via MATLAB/SIMULINK to validate the proposed topology.",
keywords = "current source inverter (CSI), Current source rectifier (CSR), mapping circuit, multiphase machine, sinusoidal pulse width modulation (SPWM), space vector pulse width modulation (SVPWM)",
author = "Elgenedy, {M. A.} and Ayman Abdel-Khalik and A. Elserougi and Shehab Ahmed and Massoud, {A. M.}",
year = "2013",
doi = "10.1109/IEEEGCC.2013.6705774",
language = "English",
isbn = "9781479907243",
pages = "193--198",
booktitle = "2013 7th IEEE GCC Conference and Exhibition, GCC 2013",

}

TY - GEN

T1 - A new five-phase to three-phase back-to-back current source converter based wind energy conversion system

AU - Elgenedy, M. A.

AU - Abdel-Khalik, Ayman

AU - Elserougi, A.

AU - Ahmed, Shehab

AU - Massoud, A. M.

PY - 2013

Y1 - 2013

N2 - Wind energy is one of the fastest growing renewable energy sources. The increased penetration of wind power into the utility grid brings challenges such as voltage and frequency fluctuations, generator torque ripples, and grid faults to power converter design in wind energy conversion systems (WECSs). Multiphase PM generators offers a promising solution to many challenges due to their inherited advantages over the three phase counterparts including reduced converter per leg rating and reduced torque ripples, which directly affect the lifetime of the drive train. In high power applications, direct drive PM generators are usually employed. Among different topologies of power converters, current source converter features a simple converter structure, low switching dv/dt, and reliable short circuit protection. In this paper, a new wind energy conversion system is proposed based on a direct drive five-phase PMSG connected to the grid using current source converters (CSCs). The generator side converter, operating in the rectification mode (CSR), is controlled to control the DC-link current, while the grid side converter, operating in the inversion mode (CSI), controls the active and reactive powers injected to the grid. The five-phase generator side converter is controlled using sinusoidal pulse width modulation (SPWM), while conventional space vector modulation is employed to control the three-phase grid side. A 5 MW system with typical system data is simulated via MATLAB/SIMULINK to validate the proposed topology.

AB - Wind energy is one of the fastest growing renewable energy sources. The increased penetration of wind power into the utility grid brings challenges such as voltage and frequency fluctuations, generator torque ripples, and grid faults to power converter design in wind energy conversion systems (WECSs). Multiphase PM generators offers a promising solution to many challenges due to their inherited advantages over the three phase counterparts including reduced converter per leg rating and reduced torque ripples, which directly affect the lifetime of the drive train. In high power applications, direct drive PM generators are usually employed. Among different topologies of power converters, current source converter features a simple converter structure, low switching dv/dt, and reliable short circuit protection. In this paper, a new wind energy conversion system is proposed based on a direct drive five-phase PMSG connected to the grid using current source converters (CSCs). The generator side converter, operating in the rectification mode (CSR), is controlled to control the DC-link current, while the grid side converter, operating in the inversion mode (CSI), controls the active and reactive powers injected to the grid. The five-phase generator side converter is controlled using sinusoidal pulse width modulation (SPWM), while conventional space vector modulation is employed to control the three-phase grid side. A 5 MW system with typical system data is simulated via MATLAB/SIMULINK to validate the proposed topology.

KW - current source inverter (CSI)

KW - Current source rectifier (CSR)

KW - mapping circuit

KW - multiphase machine

KW - sinusoidal pulse width modulation (SPWM)

KW - space vector pulse width modulation (SVPWM)

UR - http://www.scopus.com/inward/record.url?scp=84893617940&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893617940&partnerID=8YFLogxK

U2 - 10.1109/IEEEGCC.2013.6705774

DO - 10.1109/IEEEGCC.2013.6705774

M3 - Conference contribution

AN - SCOPUS:84893617940

SN - 9781479907243

SP - 193

EP - 198

BT - 2013 7th IEEE GCC Conference and Exhibition, GCC 2013

ER -