A multipurpose feed system for fluids and solid particles

R. Sadr, J. C. Klewicki

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

A system is described that is capable of feeding solid particles and liquids into a main stream conveying flow without the use of moving parts. This system provides the ability to make fine adjustments to the feed flow rate without the need to make any change in the hardware or operating conditions including the conveying flow rate. The system was tested by feeding spherical glass beads with a nominal diameter of 240 μm into a water jet. The particle flow rate was varied over the range of 1-9 g s-1. Experimental uncertainties are quantified. It is shown that a single calibration function for the feed system is valid over a significant range of flow rates.

Original languageEnglish
Pages (from-to)N33-N35
JournalMeasurement Science and Technology
Volume14
Issue number6
DOIs
Publication statusPublished - Jun 2003

    Fingerprint

Keywords

  • Feeding system
  • Injection
  • Particle-laden flow

ASJC Scopus subject areas

  • Instrumentation
  • Engineering (miscellaneous)
  • Applied Mathematics

Cite this