A Modular Multilevel Voltage-Boosting Marx Pulse-Waveform Generator for Electroporation Applications

Mohamed A. Elgenedy, Ahmed M. Massoud, Shehab Ahmed, Barry W. Williams, Jim R. McDonald

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In order to overcome the limitations of the existing classical and solid-state Marx pulse generators, this paper proposes a new modular multilevel voltage-boosting Marx pulse generator (BMPG). The proposed BMPG has hardware features that allow modularity, redundancy, and scalability as well as operational features that alleviate the need of series-connected switches and allows generation of a wide range of pulse waveforms. In the BMPG, a controllable, low-voltage input boost converter supplies, via directing/blocking (D/B) diodes, two arms of a series modular multilevel converter half-bridge sub-modules (HB-SMs). At start up, all the arm's SM capacitors are resonantly charged in parallel from 0 V, simultaneously via directing diodes, to a voltage in excess of the source voltage. After the first pulse delivery, the energy of the SM capacitors decreases due to the generated pulse. Then, for continuous operation without fully discharging the SM capacitors or having a large voltage droop as in the available Marx generators, the SM capacitors are continuously recharged in parallel, to the desired boosted voltage level. Because all SMs are parallelly connected, the boost converter duty ratio is controlled by a single voltage measurement at the output terminals of the boost converter. Due to the proposed SMs structure and the utilization of D/B diodes, each SM capacitor is effectively controlled individually without requiring a voltage sensor across each SM capacitor. Generation of the commonly used pulse waveforms in electroporation applications is possible, while assuring balanced capacitors, hence SM voltages. The proposed BMPG has several topological variations such as utilizing a buck-boost converter at the input stage and replacing the HB-SM with full-bridge SMs. The proposed BMPG topology is assessed by simulation and scaled-down proof-of-concept experimentation to explore its viability for electroporation applications.

Original languageEnglish
Article number8643407
Pages (from-to)10575-10589
Number of pages15
JournalIEEE Transactions on Power Electronics
Volume34
Issue number11
DOIs
Publication statusPublished - 1 Nov 2019

Fingerprint

Pulse generators
Capacitors
Electric potential
Diodes
Voltage measurement
Redundancy
Scalability
Switches
Topology
Hardware
Sensors

Keywords

  • Boost
  • buck-boost
  • electroporation
  • high voltage (HV)
  • Marx generator
  • modular multilevel converter (MMC)
  • pulse generator (PG)
  • pulsed electric field
  • voltage boosting

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

A Modular Multilevel Voltage-Boosting Marx Pulse-Waveform Generator for Electroporation Applications. / Elgenedy, Mohamed A.; Massoud, Ahmed M.; Ahmed, Shehab; Williams, Barry W.; McDonald, Jim R.

In: IEEE Transactions on Power Electronics, Vol. 34, No. 11, 8643407, 01.11.2019, p. 10575-10589.

Research output: Contribution to journalArticle

Elgenedy, Mohamed A. ; Massoud, Ahmed M. ; Ahmed, Shehab ; Williams, Barry W. ; McDonald, Jim R. / A Modular Multilevel Voltage-Boosting Marx Pulse-Waveform Generator for Electroporation Applications. In: IEEE Transactions on Power Electronics. 2019 ; Vol. 34, No. 11. pp. 10575-10589.
@article{dacacdd3e1204a049590cf51fb2e36ad,
title = "A Modular Multilevel Voltage-Boosting Marx Pulse-Waveform Generator for Electroporation Applications",
abstract = "In order to overcome the limitations of the existing classical and solid-state Marx pulse generators, this paper proposes a new modular multilevel voltage-boosting Marx pulse generator (BMPG). The proposed BMPG has hardware features that allow modularity, redundancy, and scalability as well as operational features that alleviate the need of series-connected switches and allows generation of a wide range of pulse waveforms. In the BMPG, a controllable, low-voltage input boost converter supplies, via directing/blocking (D/B) diodes, two arms of a series modular multilevel converter half-bridge sub-modules (HB-SMs). At start up, all the arm's SM capacitors are resonantly charged in parallel from 0 V, simultaneously via directing diodes, to a voltage in excess of the source voltage. After the first pulse delivery, the energy of the SM capacitors decreases due to the generated pulse. Then, for continuous operation without fully discharging the SM capacitors or having a large voltage droop as in the available Marx generators, the SM capacitors are continuously recharged in parallel, to the desired boosted voltage level. Because all SMs are parallelly connected, the boost converter duty ratio is controlled by a single voltage measurement at the output terminals of the boost converter. Due to the proposed SMs structure and the utilization of D/B diodes, each SM capacitor is effectively controlled individually without requiring a voltage sensor across each SM capacitor. Generation of the commonly used pulse waveforms in electroporation applications is possible, while assuring balanced capacitors, hence SM voltages. The proposed BMPG has several topological variations such as utilizing a buck-boost converter at the input stage and replacing the HB-SM with full-bridge SMs. The proposed BMPG topology is assessed by simulation and scaled-down proof-of-concept experimentation to explore its viability for electroporation applications.",
keywords = "Boost, buck-boost, electroporation, high voltage (HV), Marx generator, modular multilevel converter (MMC), pulse generator (PG), pulsed electric field, voltage boosting",
author = "Elgenedy, {Mohamed A.} and Massoud, {Ahmed M.} and Shehab Ahmed and Williams, {Barry W.} and McDonald, {Jim R.}",
year = "2019",
month = "11",
day = "1",
doi = "10.1109/TPEL.2019.2899974",
language = "English",
volume = "34",
pages = "10575--10589",
journal = "IEEE Transactions on Power Electronics",
issn = "0885-8993",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "11",

}

TY - JOUR

T1 - A Modular Multilevel Voltage-Boosting Marx Pulse-Waveform Generator for Electroporation Applications

AU - Elgenedy, Mohamed A.

AU - Massoud, Ahmed M.

AU - Ahmed, Shehab

AU - Williams, Barry W.

AU - McDonald, Jim R.

PY - 2019/11/1

Y1 - 2019/11/1

N2 - In order to overcome the limitations of the existing classical and solid-state Marx pulse generators, this paper proposes a new modular multilevel voltage-boosting Marx pulse generator (BMPG). The proposed BMPG has hardware features that allow modularity, redundancy, and scalability as well as operational features that alleviate the need of series-connected switches and allows generation of a wide range of pulse waveforms. In the BMPG, a controllable, low-voltage input boost converter supplies, via directing/blocking (D/B) diodes, two arms of a series modular multilevel converter half-bridge sub-modules (HB-SMs). At start up, all the arm's SM capacitors are resonantly charged in parallel from 0 V, simultaneously via directing diodes, to a voltage in excess of the source voltage. After the first pulse delivery, the energy of the SM capacitors decreases due to the generated pulse. Then, for continuous operation without fully discharging the SM capacitors or having a large voltage droop as in the available Marx generators, the SM capacitors are continuously recharged in parallel, to the desired boosted voltage level. Because all SMs are parallelly connected, the boost converter duty ratio is controlled by a single voltage measurement at the output terminals of the boost converter. Due to the proposed SMs structure and the utilization of D/B diodes, each SM capacitor is effectively controlled individually without requiring a voltage sensor across each SM capacitor. Generation of the commonly used pulse waveforms in electroporation applications is possible, while assuring balanced capacitors, hence SM voltages. The proposed BMPG has several topological variations such as utilizing a buck-boost converter at the input stage and replacing the HB-SM with full-bridge SMs. The proposed BMPG topology is assessed by simulation and scaled-down proof-of-concept experimentation to explore its viability for electroporation applications.

AB - In order to overcome the limitations of the existing classical and solid-state Marx pulse generators, this paper proposes a new modular multilevel voltage-boosting Marx pulse generator (BMPG). The proposed BMPG has hardware features that allow modularity, redundancy, and scalability as well as operational features that alleviate the need of series-connected switches and allows generation of a wide range of pulse waveforms. In the BMPG, a controllable, low-voltage input boost converter supplies, via directing/blocking (D/B) diodes, two arms of a series modular multilevel converter half-bridge sub-modules (HB-SMs). At start up, all the arm's SM capacitors are resonantly charged in parallel from 0 V, simultaneously via directing diodes, to a voltage in excess of the source voltage. After the first pulse delivery, the energy of the SM capacitors decreases due to the generated pulse. Then, for continuous operation without fully discharging the SM capacitors or having a large voltage droop as in the available Marx generators, the SM capacitors are continuously recharged in parallel, to the desired boosted voltage level. Because all SMs are parallelly connected, the boost converter duty ratio is controlled by a single voltage measurement at the output terminals of the boost converter. Due to the proposed SMs structure and the utilization of D/B diodes, each SM capacitor is effectively controlled individually without requiring a voltage sensor across each SM capacitor. Generation of the commonly used pulse waveforms in electroporation applications is possible, while assuring balanced capacitors, hence SM voltages. The proposed BMPG has several topological variations such as utilizing a buck-boost converter at the input stage and replacing the HB-SM with full-bridge SMs. The proposed BMPG topology is assessed by simulation and scaled-down proof-of-concept experimentation to explore its viability for electroporation applications.

KW - Boost

KW - buck-boost

KW - electroporation

KW - high voltage (HV)

KW - Marx generator

KW - modular multilevel converter (MMC)

KW - pulse generator (PG)

KW - pulsed electric field

KW - voltage boosting

UR - http://www.scopus.com/inward/record.url?scp=85072076298&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85072076298&partnerID=8YFLogxK

U2 - 10.1109/TPEL.2019.2899974

DO - 10.1109/TPEL.2019.2899974

M3 - Article

AN - SCOPUS:85072076298

VL - 34

SP - 10575

EP - 10589

JO - IEEE Transactions on Power Electronics

JF - IEEE Transactions on Power Electronics

SN - 0885-8993

IS - 11

M1 - 8643407

ER -