A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters

Ahmed Elserougi, Ahmed M. Massoud, Ayman Abdel-Khalik, Shehab Ahmed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap uses series-input, parallel-output multi-module 2-level voltage source converters (VSCs) as an alternative to the conventional single DC-to-AC voltage source converter (VSC) followed by a step down transformer. In the conventional system, semiconductor devices should be connected in series, in order to meet the high-voltage requirements in the HVDC systems. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. The proposed technique is not limited by this constraint, as series connection of semiconductor switches can be avoided by employing a large number of VSC modules. The controller of the proposed system should keep equal DC input voltages, and equal output current sharing. Detailed illustration for the proposed controller is presented in this work. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed controller.

Original languageEnglish
Title of host publication2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781479984220
DOIs
Publication statusPublished - 12 Mar 2015
Event2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015 - Muscat, Oman
Duration: 1 Feb 20154 Feb 2015

Other

Other2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015
CountryOman
CityMuscat
Period1/2/154/2/15

Fingerprint

Electric potential
Controllers
Semiconductor switches
Semiconductor devices
Electric lines
Switches

Keywords

  • Current sharing
  • HVDC
  • Multi-module
  • Tap
  • Voltage sharing
  • VSC

ASJC Scopus subject areas

  • Energy(all)
  • Engineering(all)
  • Computer Science(all)

Cite this

Elserougi, A., Massoud, A. M., Abdel-Khalik, A., & Ahmed, S. (2015). A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters. In 2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015 [7060060] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IEEEGCC.2015.7060060

A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters. / Elserougi, Ahmed; Massoud, Ahmed M.; Abdel-Khalik, Ayman; Ahmed, Shehab.

2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015. Institute of Electrical and Electronics Engineers Inc., 2015. 7060060.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elserougi, A, Massoud, AM, Abdel-Khalik, A & Ahmed, S 2015, A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters. in 2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015., 7060060, Institute of Electrical and Electronics Engineers Inc., 2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015, Muscat, Oman, 1/2/15. https://doi.org/10.1109/IEEEGCC.2015.7060060
Elserougi A, Massoud AM, Abdel-Khalik A, Ahmed S. A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters. In 2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015. Institute of Electrical and Electronics Engineers Inc. 2015. 7060060 https://doi.org/10.1109/IEEEGCC.2015.7060060
Elserougi, Ahmed ; Massoud, Ahmed M. ; Abdel-Khalik, Ayman ; Ahmed, Shehab. / A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters. 2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015. Institute of Electrical and Electronics Engineers Inc., 2015.
@inproceedings{dd2f26ee3ab148828051096f1556a960,
title = "A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters",
abstract = "Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap uses series-input, parallel-output multi-module 2-level voltage source converters (VSCs) as an alternative to the conventional single DC-to-AC voltage source converter (VSC) followed by a step down transformer. In the conventional system, semiconductor devices should be connected in series, in order to meet the high-voltage requirements in the HVDC systems. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. The proposed technique is not limited by this constraint, as series connection of semiconductor switches can be avoided by employing a large number of VSC modules. The controller of the proposed system should keep equal DC input voltages, and equal output current sharing. Detailed illustration for the proposed controller is presented in this work. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed controller.",
keywords = "Current sharing, HVDC, Multi-module, Tap, Voltage sharing, VSC",
author = "Ahmed Elserougi and Massoud, {Ahmed M.} and Ayman Abdel-Khalik and Shehab Ahmed",
year = "2015",
month = "3",
day = "12",
doi = "10.1109/IEEEGCC.2015.7060060",
language = "English",
booktitle = "2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters

AU - Elserougi, Ahmed

AU - Massoud, Ahmed M.

AU - Abdel-Khalik, Ayman

AU - Ahmed, Shehab

PY - 2015/3/12

Y1 - 2015/3/12

N2 - Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap uses series-input, parallel-output multi-module 2-level voltage source converters (VSCs) as an alternative to the conventional single DC-to-AC voltage source converter (VSC) followed by a step down transformer. In the conventional system, semiconductor devices should be connected in series, in order to meet the high-voltage requirements in the HVDC systems. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. The proposed technique is not limited by this constraint, as series connection of semiconductor switches can be avoided by employing a large number of VSC modules. The controller of the proposed system should keep equal DC input voltages, and equal output current sharing. Detailed illustration for the proposed controller is presented in this work. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed controller.

AB - Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap uses series-input, parallel-output multi-module 2-level voltage source converters (VSCs) as an alternative to the conventional single DC-to-AC voltage source converter (VSC) followed by a step down transformer. In the conventional system, semiconductor devices should be connected in series, in order to meet the high-voltage requirements in the HVDC systems. Hence, careful design to ensure dynamic voltage sharing between switches is necessary. The proposed technique is not limited by this constraint, as series connection of semiconductor switches can be avoided by employing a large number of VSC modules. The controller of the proposed system should keep equal DC input voltages, and equal output current sharing. Detailed illustration for the proposed controller is presented in this work. A Simulation study is carried out to show the effectiveness of the proposed architecture and to validate the proposed controller.

KW - Current sharing

KW - HVDC

KW - Multi-module

KW - Tap

KW - Voltage sharing

KW - VSC

UR - http://www.scopus.com/inward/record.url?scp=84929121183&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84929121183&partnerID=8YFLogxK

U2 - 10.1109/IEEEGCC.2015.7060060

DO - 10.1109/IEEEGCC.2015.7060060

M3 - Conference contribution

AN - SCOPUS:84929121183

BT - 2015 IEEE 8th GCC Conference and Exhibition, GCCCE 2015

PB - Institute of Electrical and Electronics Engineers Inc.

ER -