A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus

M. Z A Anabtawi, N. Hilal, A. Al-Muftah, M. Khalaf, M. C. Leaper, M. A. Hastaoglu

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.

Original languageEnglish
Pages (from-to)35-48
Number of pages14
JournalAdvanced Powder Technology
Volume16
Issue number1
DOIs
Publication statusPublished - 2005
Externally publishedYes

Fingerprint

Drag
Fluids
Fluidization
Mathematical models

Keywords

  • Darcy's flow
  • Drag force
  • Force balance model
  • Spouted bed
  • Velocity distribution

ASJC Scopus subject areas

  • Chemical Engineering(all)

Cite this

Anabtawi, M. Z. A., Hilal, N., Al-Muftah, A., Khalaf, M., Leaper, M. C., & Hastaoglu, M. A. (2005). A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. Advanced Powder Technology, 16(1), 35-48. https://doi.org/10.1163/1568552053166700

A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. / Anabtawi, M. Z A; Hilal, N.; Al-Muftah, A.; Khalaf, M.; Leaper, M. C.; Hastaoglu, M. A.

In: Advanced Powder Technology, Vol. 16, No. 1, 2005, p. 35-48.

Research output: Contribution to journalArticle

Anabtawi, MZA, Hilal, N, Al-Muftah, A, Khalaf, M, Leaper, MC & Hastaoglu, MA 2005, 'A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus', Advanced Powder Technology, vol. 16, no. 1, pp. 35-48. https://doi.org/10.1163/1568552053166700
Anabtawi, M. Z A ; Hilal, N. ; Al-Muftah, A. ; Khalaf, M. ; Leaper, M. C. ; Hastaoglu, M. A. / A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. In: Advanced Powder Technology. 2005 ; Vol. 16, No. 1. pp. 35-48.
@article{afa578a0fe1f4b4cb61c3cd54da82522,
title = "A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus",
abstract = "A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.",
keywords = "Darcy's flow, Drag force, Force balance model, Spouted bed, Velocity distribution",
author = "Anabtawi, {M. Z A} and N. Hilal and A. Al-Muftah and M. Khalaf and Leaper, {M. C.} and Hastaoglu, {M. A.}",
year = "2005",
doi = "10.1163/1568552053166700",
language = "English",
volume = "16",
pages = "35--48",
journal = "Advanced Powder Technology",
issn = "0921-8831",
publisher = "Elsevier BV",
number = "1",

}

TY - JOUR

T1 - A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus

AU - Anabtawi, M. Z A

AU - Hilal, N.

AU - Al-Muftah, A.

AU - Khalaf, M.

AU - Leaper, M. C.

AU - Hastaoglu, M. A.

PY - 2005

Y1 - 2005

N2 - A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.

AB - A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.

KW - Darcy's flow

KW - Drag force

KW - Force balance model

KW - Spouted bed

KW - Velocity distribution

UR - http://www.scopus.com/inward/record.url?scp=15744369262&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=15744369262&partnerID=8YFLogxK

U2 - 10.1163/1568552053166700

DO - 10.1163/1568552053166700

M3 - Article

VL - 16

SP - 35

EP - 48

JO - Advanced Powder Technology

JF - Advanced Powder Technology

SN - 0921-8831

IS - 1

ER -