A design example of an 8-pole radial AMB for flywheel energy storage

Mohamed I. Daoud, Ayman Abdel-Khalik, A. Massoud, Shehab Ahmed, Nabil H. Abbasy

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

High speed flywheel energy storage systems normally use magnetic bearings to reduce friction loss. Bearing load consists of radial forces with or without axial forces according to drive configuration and requirements. The magnetic bearing system may be passive magnetic bearing (PMB), active magnetic bearing (AMB) or superconducting magnetic bearing (SMB) according to the required application. In this paper, a design example for an 8-pole radial AMB used for flywheel energy storage is presented. The design details along with finite element simulations are given to verify the design requirements. Finite element analysis is also used to obtain the bearing parameters. Based on calculated system parameters, a Matlab model is built to simulate the magnetic bearing in different cases.

Original languageEnglish
Title of host publicationProceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012
Pages1153-1159
Number of pages7
DOIs
Publication statusPublished - 2012
Event2012 20th International Conference on Electrical Machines, ICEM 2012 - Marseille, France
Duration: 2 Sep 20125 Sep 2012

Other

Other2012 20th International Conference on Electrical Machines, ICEM 2012
CountryFrance
CityMarseille
Period2/9/125/9/12

Fingerprint

Magnetic bearings
Flywheels
Energy storage
Poles
Bearings (structural)
Friction
Finite element method

Keywords

  • active magnetic bearing
  • Bearing-less
  • hybrid bearing
  • passive magnetic bearing
  • radial bearing
  • superconducting magnetic bearing

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Mechanical Engineering

Cite this

Daoud, M. I., Abdel-Khalik, A., Massoud, A., Ahmed, S., & Abbasy, N. H. (2012). A design example of an 8-pole radial AMB for flywheel energy storage. In Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp. 1153-1159). [6350021] https://doi.org/10.1109/ICElMach.2012.6350021

A design example of an 8-pole radial AMB for flywheel energy storage. / Daoud, Mohamed I.; Abdel-Khalik, Ayman; Massoud, A.; Ahmed, Shehab; Abbasy, Nabil H.

Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. 2012. p. 1153-1159 6350021.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Daoud, MI, Abdel-Khalik, A, Massoud, A, Ahmed, S & Abbasy, NH 2012, A design example of an 8-pole radial AMB for flywheel energy storage. in Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012., 6350021, pp. 1153-1159, 2012 20th International Conference on Electrical Machines, ICEM 2012, Marseille, France, 2/9/12. https://doi.org/10.1109/ICElMach.2012.6350021
Daoud MI, Abdel-Khalik A, Massoud A, Ahmed S, Abbasy NH. A design example of an 8-pole radial AMB for flywheel energy storage. In Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. 2012. p. 1153-1159. 6350021 https://doi.org/10.1109/ICElMach.2012.6350021
Daoud, Mohamed I. ; Abdel-Khalik, Ayman ; Massoud, A. ; Ahmed, Shehab ; Abbasy, Nabil H. / A design example of an 8-pole radial AMB for flywheel energy storage. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. 2012. pp. 1153-1159
@inproceedings{3085fe58ee0e49a6b90c2ca02f4a68ef,
title = "A design example of an 8-pole radial AMB for flywheel energy storage",
abstract = "High speed flywheel energy storage systems normally use magnetic bearings to reduce friction loss. Bearing load consists of radial forces with or without axial forces according to drive configuration and requirements. The magnetic bearing system may be passive magnetic bearing (PMB), active magnetic bearing (AMB) or superconducting magnetic bearing (SMB) according to the required application. In this paper, a design example for an 8-pole radial AMB used for flywheel energy storage is presented. The design details along with finite element simulations are given to verify the design requirements. Finite element analysis is also used to obtain the bearing parameters. Based on calculated system parameters, a Matlab model is built to simulate the magnetic bearing in different cases.",
keywords = "active magnetic bearing, Bearing-less, hybrid bearing, passive magnetic bearing, radial bearing, superconducting magnetic bearing",
author = "Daoud, {Mohamed I.} and Ayman Abdel-Khalik and A. Massoud and Shehab Ahmed and Abbasy, {Nabil H.}",
year = "2012",
doi = "10.1109/ICElMach.2012.6350021",
language = "English",
isbn = "9781467301428",
pages = "1153--1159",
booktitle = "Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012",

}

TY - GEN

T1 - A design example of an 8-pole radial AMB for flywheel energy storage

AU - Daoud, Mohamed I.

AU - Abdel-Khalik, Ayman

AU - Massoud, A.

AU - Ahmed, Shehab

AU - Abbasy, Nabil H.

PY - 2012

Y1 - 2012

N2 - High speed flywheel energy storage systems normally use magnetic bearings to reduce friction loss. Bearing load consists of radial forces with or without axial forces according to drive configuration and requirements. The magnetic bearing system may be passive magnetic bearing (PMB), active magnetic bearing (AMB) or superconducting magnetic bearing (SMB) according to the required application. In this paper, a design example for an 8-pole radial AMB used for flywheel energy storage is presented. The design details along with finite element simulations are given to verify the design requirements. Finite element analysis is also used to obtain the bearing parameters. Based on calculated system parameters, a Matlab model is built to simulate the magnetic bearing in different cases.

AB - High speed flywheel energy storage systems normally use magnetic bearings to reduce friction loss. Bearing load consists of radial forces with or without axial forces according to drive configuration and requirements. The magnetic bearing system may be passive magnetic bearing (PMB), active magnetic bearing (AMB) or superconducting magnetic bearing (SMB) according to the required application. In this paper, a design example for an 8-pole radial AMB used for flywheel energy storage is presented. The design details along with finite element simulations are given to verify the design requirements. Finite element analysis is also used to obtain the bearing parameters. Based on calculated system parameters, a Matlab model is built to simulate the magnetic bearing in different cases.

KW - active magnetic bearing

KW - Bearing-less

KW - hybrid bearing

KW - passive magnetic bearing

KW - radial bearing

KW - superconducting magnetic bearing

UR - http://www.scopus.com/inward/record.url?scp=84870798107&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870798107&partnerID=8YFLogxK

U2 - 10.1109/ICElMach.2012.6350021

DO - 10.1109/ICElMach.2012.6350021

M3 - Conference contribution

SN - 9781467301428

SP - 1153

EP - 1159

BT - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012

ER -