A conceptual NF/RO arrangement design in the pressure vessel for seawater desalination

Ali Altaee, Adel Sharif

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Abstract: The main objective of this study is to understand the operation mechanisms of reverse osmosis (RO) membrane and optimization of the operating mechanisms of the RO system in order to reduce the membrane fouling and/or energy requirements. Typically, the high-pressure RO membrane vessel is loaded with membrane elements having the same flux and salt rejection rate. It has been conceived that when different types of RO elements are loaded into the pressure vessel in a special arrangement according to their permeability and salt rejection rate, this arrangement has the potential for reducing the energy consumption of the RO plant. Here, a conceptual design is introduced to describe this new idea. The effects of feed salinity and temperature were investigated in this paper using the reverse osmosis system analysis filmtec membrane design software. A two pass membrane treatment process was designed for desalting seawater at different salinities varied from 35,000 ppm to 43,000 ppm. The results showed a net energy saving from 2.5 to 3% (depends on the feed salinity) could be achieved. The effect of the feed temperature was also investigated, and the new design was found to be more energy efficient. Membrane scaling was also investigated in this study, and it was found that the new membrane arrangement design was less efficient than old design at feed salinity 35,000 ppm and vice versa at feed salinity 45,000 ppm. This was attributed to the use of high membranes permeabilities in the new design.

Original languageEnglish
Pages (from-to)624-636
Number of pages13
JournalDesalination and Water Treatment
Volume54
Issue number3
DOIs
Publication statusPublished - 17 Apr 2015
Externally publishedYes

Fingerprint

Reverse osmosis
Desalination
Pressure vessels
Seawater
desalination
vessel
membrane
seawater
Membranes
Osmosis membranes
salinity
Salts
Salt removal
Membrane fouling
Software design
Conceptual design
permeability
salt
reverse osmosis
Energy conservation

Keywords

  • Energy consumption
  • Pressure vessel design
  • Reverse Osmosis
  • Water and salt permeability

ASJC Scopus subject areas

  • Pollution
  • Water Science and Technology
  • Ocean Engineering

Cite this

A conceptual NF/RO arrangement design in the pressure vessel for seawater desalination. / Altaee, Ali; Sharif, Adel.

In: Desalination and Water Treatment, Vol. 54, No. 3, 17.04.2015, p. 624-636.

Research output: Contribution to journalArticle

@article{077e058726604cf5a8868622063e884b,
title = "A conceptual NF/RO arrangement design in the pressure vessel for seawater desalination",
abstract = "Abstract: The main objective of this study is to understand the operation mechanisms of reverse osmosis (RO) membrane and optimization of the operating mechanisms of the RO system in order to reduce the membrane fouling and/or energy requirements. Typically, the high-pressure RO membrane vessel is loaded with membrane elements having the same flux and salt rejection rate. It has been conceived that when different types of RO elements are loaded into the pressure vessel in a special arrangement according to their permeability and salt rejection rate, this arrangement has the potential for reducing the energy consumption of the RO plant. Here, a conceptual design is introduced to describe this new idea. The effects of feed salinity and temperature were investigated in this paper using the reverse osmosis system analysis filmtec membrane design software. A two pass membrane treatment process was designed for desalting seawater at different salinities varied from 35,000 ppm to 43,000 ppm. The results showed a net energy saving from 2.5 to 3{\%} (depends on the feed salinity) could be achieved. The effect of the feed temperature was also investigated, and the new design was found to be more energy efficient. Membrane scaling was also investigated in this study, and it was found that the new membrane arrangement design was less efficient than old design at feed salinity 35,000 ppm and vice versa at feed salinity 45,000 ppm. This was attributed to the use of high membranes permeabilities in the new design.",
keywords = "Energy consumption, Pressure vessel design, Reverse Osmosis, Water and salt permeability",
author = "Ali Altaee and Adel Sharif",
year = "2015",
month = "4",
day = "17",
doi = "10.1080/19443994.2014.890547",
language = "English",
volume = "54",
pages = "624--636",
journal = "Desalination and Water Treatment",
issn = "1944-3994",
publisher = "Taylor and Francis Ltd.",
number = "3",

}

TY - JOUR

T1 - A conceptual NF/RO arrangement design in the pressure vessel for seawater desalination

AU - Altaee, Ali

AU - Sharif, Adel

PY - 2015/4/17

Y1 - 2015/4/17

N2 - Abstract: The main objective of this study is to understand the operation mechanisms of reverse osmosis (RO) membrane and optimization of the operating mechanisms of the RO system in order to reduce the membrane fouling and/or energy requirements. Typically, the high-pressure RO membrane vessel is loaded with membrane elements having the same flux and salt rejection rate. It has been conceived that when different types of RO elements are loaded into the pressure vessel in a special arrangement according to their permeability and salt rejection rate, this arrangement has the potential for reducing the energy consumption of the RO plant. Here, a conceptual design is introduced to describe this new idea. The effects of feed salinity and temperature were investigated in this paper using the reverse osmosis system analysis filmtec membrane design software. A two pass membrane treatment process was designed for desalting seawater at different salinities varied from 35,000 ppm to 43,000 ppm. The results showed a net energy saving from 2.5 to 3% (depends on the feed salinity) could be achieved. The effect of the feed temperature was also investigated, and the new design was found to be more energy efficient. Membrane scaling was also investigated in this study, and it was found that the new membrane arrangement design was less efficient than old design at feed salinity 35,000 ppm and vice versa at feed salinity 45,000 ppm. This was attributed to the use of high membranes permeabilities in the new design.

AB - Abstract: The main objective of this study is to understand the operation mechanisms of reverse osmosis (RO) membrane and optimization of the operating mechanisms of the RO system in order to reduce the membrane fouling and/or energy requirements. Typically, the high-pressure RO membrane vessel is loaded with membrane elements having the same flux and salt rejection rate. It has been conceived that when different types of RO elements are loaded into the pressure vessel in a special arrangement according to their permeability and salt rejection rate, this arrangement has the potential for reducing the energy consumption of the RO plant. Here, a conceptual design is introduced to describe this new idea. The effects of feed salinity and temperature were investigated in this paper using the reverse osmosis system analysis filmtec membrane design software. A two pass membrane treatment process was designed for desalting seawater at different salinities varied from 35,000 ppm to 43,000 ppm. The results showed a net energy saving from 2.5 to 3% (depends on the feed salinity) could be achieved. The effect of the feed temperature was also investigated, and the new design was found to be more energy efficient. Membrane scaling was also investigated in this study, and it was found that the new membrane arrangement design was less efficient than old design at feed salinity 35,000 ppm and vice versa at feed salinity 45,000 ppm. This was attributed to the use of high membranes permeabilities in the new design.

KW - Energy consumption

KW - Pressure vessel design

KW - Reverse Osmosis

KW - Water and salt permeability

UR - http://www.scopus.com/inward/record.url?scp=84925363963&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84925363963&partnerID=8YFLogxK

U2 - 10.1080/19443994.2014.890547

DO - 10.1080/19443994.2014.890547

M3 - Article

AN - SCOPUS:84925363963

VL - 54

SP - 624

EP - 636

JO - Desalination and Water Treatment

JF - Desalination and Water Treatment

SN - 1944-3994

IS - 3

ER -