If you made any changes in Pure these will be visible here soon.

Research Output 1988 2019

  • 1514 Citations
  • 24 h-Index
  • 84 Article
  • 15 Conference contribution
  • 2 Editorial
  • 1 Review article
Filter
Conference contribution
2018
2 Citations (Scopus)

Plane strain sliding contact between a rigid cylinder and a pseudoelastic shape memory alloy half-space

Fernandes, R., Boyd, J. G., Lagoudas, D. C. & El-Borgi, S., 1 Jan 2018, Mechanics and Behavior of Active Materials; Structural Health Monitoring; Bioinspired Smart Materials and Systems; Energy Harvesting; Emerging Technologies. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape memory effect
Temperature
Constitutive models
Indentation
Residual stresses

Simulating eddy current sensors in blade tip timing application: Modeling and experimental validation

Jamia, N., Friswell, M. I., El-Borgi, S. & Rajendran, P., 1 Jan 2018, Mechanics of Solids, Structures, and Fluids. American Society of Mechanical Engineers (ASME), Vol. 9.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Eddy currents
Sensors
Turbomachine blades
Gas turbines
Impurities
2017
1 Citation (Scopus)

Coupled mechanical and electromagnetic modeling of eddy current sensors

Jamia, N., Friswell, M. I., El-Borgi, S. & Rajendran, P., 1 Jan 2017, Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017. International Center for Numerical Methods in Engineering, Vol. 2017-January. p. 357-368 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Eddy Currents
Eddy currents
Blade
Sensor
Sensors
2016

Identification of breathing cracked shaft models from measurements

Friswell, M. I., Fernandes, R., Jamia, N. & El-Borgi, S., 2016, Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics. Springer New York LLC, Vol. 8. p. 537-543 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Identification (control systems)
Cracks
Stiffness
Condition monitoring
Rotors
2015
2 Citations (Scopus)

Structural health monitoring using time-delay embedding and phase-space warping

AlHamaydeh, M. H., Wong, K., Fernandes, R., Seok, J., Abdel-Rahman, E. M. & El-Borgi, S., 2015, COMPDYN 2015 - 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. National Technical University of Athens, p. 2568-2575 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

health monitoring
Warping
Structural health monitoring
Health Monitoring
Time Delay
2013

A partially permeable mixed-mode crack embedded in a functionally graded magneto electro elastic layer

Rekik, M., El-Borgi, S. & Ounaies, Z., 2013, 13th International Conference on Fracture 2013, ICF 2013. Chinese Society of Theoretical and Applied Mechanics, Vol. 3. p. 2262-2270 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack
Cracks
Electromagnetic induction
permeability
magnetic intensity

Blade tip timing based condition monitoring of bladed disks in rotating machines

Jamia, N., Friswell, M. I., El-Borgi, S. & Rajendran, P., 1 Jan 2013, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). KU Leuven - Departement Werktuigkunde, p. 955-969 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

blade tips
Condition monitoring
time measurement
blades
sensors
2006

Damage characterization through nonlinear analysis of transient vibrations

Hajj, M. R., Chabalko, C. C., Duke, J. C., El-Borgi, S., Elouafi, S. B. & Choura, S., 2006, Collection of Technical Papers - 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: 14th AIAA/ASME/AHS Adaptive Structures Conference, 8th AIAA Non-deterministic App. Vol. 11. p. 7747-7755 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nonlinear analysis
Natural frequencies
Vibration measurement
Structural health monitoring
Vibrations (mechanical)

Dynamic analysis of a digital micromirror device

Chaabane, G., Abdel-Rahman, E. M., Nayfeh, A. H., Choura, S., El-Borgi, S. & Jammoussi, H., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Applied Mechanics Division. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Digital devices
Dynamic analysis
Boundary conditions
Electric potential
Torsional stress

Dynamics of variable-geometry electrostatic microactuators

Najar, F., Choura, S., Abdel-Rahman, E. M., El-Borgi, S. & Nayfeh, A. H., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Applied Mechanics Division. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microactuators
Electrostatics
Geometry
Frequency response
Finite difference method
2 Citations (Scopus)

Theoretical and numerical modeling of a CMOS micromachined acoustic sensor

Mezghani, B., Haboura, K., Tounsi, F., Smaoui, S., El-Borgi, S., Choura, S. & Masmoudi, M., 2006, Proceedings - 2006 International Conference on Design and Test of Integrated Systems in Nanoscale Technology, IEEE DTIS 2006. p. 419-423 5 p. 1708688

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustics
Membranes
Sensors
Finite element method
Microphones
2005

Output-only modal identification of existing reinforced concrete structures

El-Borgi, S., Choura, S., Ventura, C., Neifar, M., Annabi, M., Baccouch, M. & Maalej, R., 2005, Proceedings of the 1st International Operational Modal Analysis Conference, IOMAC 2005. Aalborg University

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reinforced concrete
Methodology
Finite element model
Decomposition
Vibration

Partial closure analysis of a surface crack in a graded medium loaded by a frictional flat stamp

Dag, S., El-Borgi, S. & Erdogan, F., 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 1. p. 280-285 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack
Cracks
friction
Friction
Stress intensity factors
2003

Magnetorheological dampers for semi-active control of seismically excited nonlinear structures

El-Borgi, S., Sadek, F., Walha, M. A., Jemai, B. & Riley, M., 2003, Proceedings of the 2003 ASCE/SEI Structures Congress and Exposition: Engineering Smarter. Lowes, L. N. & Miller, G. R. (eds.). p. 201-202 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding mode control
State feedback
Magnetic fields
Feedback
1988
1 Citation (Scopus)

Probabilistic prediction of mixed mode fracture initiation and trajectory under random stresses

Grigoriu, M., El-Borgi, S., Saif, M. & Ingraffea, A. R., 1988, Probab Methods Civ Eng Proc 5th ASCE Spec Conf. Publ by ASCE, p. 61-64 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack initiation
Fracture mechanics
Computer program listings
Trajectories
Cracks