• 5927 Citations
  • 38 h-Index
1987 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2011

Modeling of the stress-birefringence-stretch behavior in rubbers using the Gent model

Idrissa, A. K. M., Ahzi, S., Rémond, Y. & Gracio, J., 2011, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 133, 3, 030905.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Statistical continuum theory for the effective conductivity of carbon nanotubes filled polymer composites

Baniassadi, M., Laachachi, A., Makradi, A., Belouettar, S., Ruch, D., Muller, R., Garmestani, H., Toniazzo, V. & Ahzi, S., 10 Jun 2011, In : Thermochimica Acta. 520, 1-2, p. 33-37 5 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)

Three-phase solid oxide fuel cell anode microstructure realization using two-point correlation functions

Baniassadi, M., Garmestani, H., Li, D. S., Ahzi, S., Khaleel, M. & Sun, X., 1 Jan 2011, In : Acta Materialia. 59, 1, p. 30-43 14 p.

Research output: Contribution to journalArticle

49 Citations (Scopus)

Using SAXS approach to estimate thermal conductivity of polystyrene/zirconia nanocomposite by exploiting strong contrast technique

Baniassadi, M., Addiego, F., Laachachi, A., Ahzi, S., Garmestani, H., Hassouna, F., Makradi, A., Toniazzo, V. & Ruch, D., Apr 2011, In : Acta Materialia. 59, 7, p. 2742-2748 7 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)
2010

3D reconstruction of Carbon nanotube composite microstructure using correlation functions

Li, D. S., Baniassadi, M., Garmestani, H., Ahzi, S., Reda Taha, M. M. & Ruch, D., Aug 2010, In : Journal of Computational and Theoretical Nanoscience. 7, 8, p. 1462-1468 7 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)

A new three-phase model to estimate the effective elastic properties of semi-crystalline polymers: Application to PET

Gueguen, O., Ahzi, S., Makradi, A. & Belouettar, S., Jan 2010, In : Mechanics of Materials. 42, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

38 Citations (Scopus)

Characterization of contamination effects for two polypropylene-based materials

Pessey, D., Bahlouli, N., Raveyre, C., Guillet, J., Ahzi, S., Hiver, J. M. & Dahoun, A., Jan 2010, In : Polymer Engineering and Science. 50, 1, p. 1-9 9 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Investigation of the stiffness and yield behaviour of melt-intercalated poly(methyl methacrylate)/organoclay nanocomposites: Characterisation and modelling

Matadi, R., Gueguen, O., Ahzi, S., Gracio, J., Muller, R. & Ruch, D., Apr 2010, In : Journal of Nanoscience and Nanotechnology. 10, 4, p. 2956-2961 6 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Micromechanically-based formulation of the cooperative model for the yield behavior of starch-based nano-biocomposites

Chivrac, F., Gueguen, O., Pollet, E., Averous, L., Ahzi, S. & Belouettar, S., Apr 2010, In : Journal of Nanoscience and Nanotechnology. 10, 4, p. 2949-2955 7 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Modeling of biologically inspired adhesive pads using Monte Carlo analysis

Safdari, M., Baniassadi, M., Asiaei, S., Garmestani, H. & Ahzi, S., 1 May 2010, In : Journal of Adhesion Science and Technology. 24, 7, p. 1207-1220 14 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Modeling of thermal shock-induced damage in a borosilicate glass

Dubé, M., Doquet, V., Constantinescu, A., George, D., Rémond, Y. & Ahzi, S., Sep 2010, In : Mechanics of Materials. 42, 9, p. 863-872 10 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)

Numerical simulation of residual stresses in diamond coating on Ti-6Al-4V substrate

Nibennaoune, Z., George, D., Ahzi, S., Ruch, D., Remond, Y. & Gracio, J. J., 2 Apr 2010, In : Thin Solid Films. 518, 12, p. 3260-3266 7 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)
4 Citations (Scopus)

Renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres: Thermal, physical and mechanical properties

Hablot, E., Matadi, R., Ahzi, S. & Avérous, L., Mar 2010, In : Composites Science and Technology. 70, 3, p. 504-509 6 p.

Research output: Contribution to journalArticle

39 Citations (Scopus)

Statistical continuum theory for the effective conductivity of fiber filled polymer composites: Effect of orientation distribution and aspect ratio

Mikdam, A., Makradi, A., Ahzi, S., Garmestani, H., Li, D. S. & Remond, Y., Mar 2010, In : Composites Science and Technology. 70, 3, p. 510-517 8 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)

Towards optimization of time modulated chemical vapour deposition for nanostructured diamond films on Ti6Al4V

Nibennaoune, Z., George, D., Antoni, F., Santos, J., Cabral, G., Ahzi, S., Ruch, D., Gracio, J. & Remond, Y., Apr 2010, In : Journal of Nanoscience and Nanotechnology. 10, 4, p. 2838-2843 6 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Use of functionalized nanosilica to improve thermo-mechanical properties of epoxy adhesive joint bonding aluminium substrates

Sperandio, C., Laachachi, A., Ruch, D., Poilâne, C., Bourson, P., Salvestrini, J. P. & Ahzi, S., Apr 2010, In : Journal of Nanoscience and Nanotechnology. 10, 4, p. 2844-2849 6 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Yield behaviour of renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres

Hablot, E., Matadi, R., Ahzi, S., Vaudemond, R., Ruch, D. & Avérous, L., Mar 2010, In : Composites Science and Technology. 70, 3, p. 525-529 5 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)
2009

A comparison of viscoplastic intermediate approaches for deformation texture evolution in face-centered cubic polycrystals

M'Guil, S., Ahzi, S., Youssef, H., Baniassadi, M. & Gracio, J. J., May 2009, In : Acta Materialia. 57, 8, p. 2496-2508 13 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Analysis of texture evolution in hcp polycrystals using a viscoplastic intermediate approach

M'Guil, S., Ahzi, S. & Gracio, J. J., Dec 2009, In : International Journal of Material Forming. 2, SUPPL. 1, p. 57-60 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

A new approximation for the three-point probability function

Mikdam, A., Makradi, A., Ahzi, S., Garmestani, H., Li, D. S. & Y. Remond, R., 15 Oct 2009, In : International Journal of Solids and Structures. 46, 21, p. 3782-3787 6 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)

Effective conductivity in isotropic heterogeneous media using a strong-contrast statistical continuum theory

Mikdam, A., Makradi, A., Ahzi, S., Garmestani, H., Li, D. S. & Remond, Y., Jan 2009, In : Journal of the Mechanics and Physics of Solids. 57, 1, p. 76-86 11 p.

Research output: Contribution to journalArticle

37 Citations (Scopus)

Electromagnetic forming process: Estimation of magnetic pressure in tube expansion and numerical simulation

Siddiqui, M. A., Correia, J. P. M., Ahzi, S. & Belouettar, S., Dec 2009, In : International Journal of Material Forming. 2, SUPPL. 1, p. 649-652 4 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Microstructure design to improve wear resistance in bioimplant UHMWPE materials

Li, D. S., Garmestani, H., Ahzi, S., Khaleel, M. & Ruch, D., 1 Oct 2009, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 131, 4, p. 0412111-0412117 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials

Milhans, J., Ahzi, S., Garmestani, H., Khaleel, M. A., Sun, X. & Koeppel, B. J., 1 May 2009, In : Materials and Design. 30, 5, p. 1667-1673 7 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)

Prediction of crack propagation paths in the unit cell of sofc stacks

Joulaee, N., Makradi, A., Ahzi, S., Khaleel, M. A. & Koeppel, B. K., 1 Aug 2009, In : International Journal of Mechanics and Materials in Design. 5, 3, p. 217-230 14 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Predictions of polycrystalline yield surfaces for FCC metals using a new viscoplastic intermediate approach

M'Guil, S., Ahzi, S., Barlat, F. & Gracio, J. J., Dec 2009, In : International Journal of Material Forming. 2, SUPPL. 1, p. 399-402 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Preparation, structural characterization, and thermomechanical properties of poly(methyl methacrylate)/organoclay nanocomposites by melt intercalation

Matadi, R., Makradi, A., Ahzi, S., Sieffert, J. G., Etienne, S., Rush, D., Vaudemont, R., Muller, R. & Bouquey, M., May 2009, In : Journal of Nanoscience and Nanotechnology. 9, 5, p. 2923-2930 8 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Third international conference on polymer behavior: "multiphysics approaches for the behavior of polymers and polymer-based nanomaterials"

Ahzi, S., Patlazhan, S., Remond, Y. & Khaleel, M., 2 Nov 2009, In : Applied Rheology. 19, 4, p. 247-249 3 p.

Research output: Contribution to journalArticle

Three-dimensional transient finite element analysis of the selective laser sintering process

Dong, L., Makradi, A., Ahzi, S. & Remond, Y., 19 Jan 2009, In : Journal of Materials Processing Technology. 209, 2, p. 700-706 7 p.

Research output: Contribution to journalArticle

115 Citations (Scopus)
2008

A new intermediate model for polycrystalline viscoplastic deformation and texture evolution

Ahzi, S. & M'Guil, S., Nov 2008, In : Acta Materialia. 56, 19, p. 5359-5369 11 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)

A numerical model to simulate electromagnetic sheet metal forming process

Siddiqui, M. A., Correia, J. P. M., Ahzi, S. & Belouettar, S., Jul 2008, In : International Journal of Material Forming. 1, SUPPL. 1, p. 1387-1390 4 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Application of composite models to isotactic polypropylene for the determination of phase specific stress-strain curves

Spieckermann, F., Wilhelm, H., Schafler, E., Ahzi, S. & Zehetbauer, M. J., 15 Jun 2008, In : Materials Science and Engineering A. 483-484, 1-2 C, p. 76-78 3 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

A simple model to simulate electromagnetic sheet free bulging process

Correia, J. P. M., Siddiqui, M. A., Ahzi, S., Belouettar, S. & Davies, R., Oct 2008, In : International Journal of Mechanical Sciences. 50, 10-11, p. 1466-1475 10 p.

Research output: Contribution to journalArticle

62 Citations (Scopus)

Comparison of micromechanical models for the prediction of the effective elastic properties of semicrystalline polymers: Application to polyethylene

Gueguen, O., Ahzi, S., Belouettar, S. & Makradi, A., May 2008, In : Polymer Science - Series A. 50, 5, p. 523-532 10 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality

Husson, C., Correia, J. P. M., Daridon, L. & Ahzi, S., 1 Apr 2008, In : Journal of Materials Processing Technology. 199, 1, p. 74-83 10 p.

Research output: Contribution to journalArticle

68 Citations (Scopus)

Hydroxyapatite modified with carbon-nanotube-reinforced poly(methyl methacrylate): A nanocomposite material for biomedical applications

Singh, M. K., Shokuhfar, T., De Almeida Gracio, J. J., De Sousa, A. C. M., Da Fonte Fereira, J. M., Garmestani, H. & Ahzi, S., 11 Mar 2008, In : Advanced Functional Materials. 18, 5, p. 694-700 7 p.

Research output: Contribution to journalArticle

88 Citations (Scopus)

Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers

Gueguen, O., Richeton, J., Ahzi, S. & Makradi, A., Apr 2008, In : Acta Materialia. 56, 7, p. 1650-1655 6 p.

Research output: Contribution to journalArticle

42 Citations (Scopus)

Micromechanical modeling and characterization of the effective properties in starch-based nano-biocomposites

Chivrac, F., Gueguen, O., Pollet, E., Ahzi, S., Makradi, A. & Averous, L., Nov 2008, In : Acta Biomaterialia. 4, 6, p. 1707-1714 8 p.

Research output: Contribution to journalArticle

55 Citations (Scopus)

Polymer composites for the automotive industry: Characterisation of the recycling effect on the strain rate sensitivity

Pessey, D., Bahlouli, N., Pattofatto, S. & Ahzi, S., Aug 2008, In : International Journal of Crashworthiness. 13, 4, p. 411-424 14 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Prediction of the mechanical properties of hydroxyapatite/polymethyl methacrylate/carbon nanotubes nanocomposite

Shokuhfar, T., Makradi, A., Titus, E., Cabral, G., Ahzi, S., Sousa, A. C. M., Belouettar, S. & Gracio, J., Aug 2008, In : Journal of Nanoscience and Nanotechnology. 8, 8, p. 4279-4284 6 p.

Research output: Contribution to journalArticle

26 Citations (Scopus)

Simulation of the densification of semicrystalline polymer powders during the selective laser sintering process: Application to Nylon 12

Dong, L., Makradi, A., Ahzi, S., Remond, Y. & Sun, X., Jun 2008, In : Polymer Science - Series A. 50, 6, p. 704-709 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Simulation of the Taylor impact test and analysis of damage evolution using a nucleation and growth based approach

Campagne-Lambert, L., Daridon, L., Oussouaddi, O., Ahzi, S. & Sun, X., 2008, In : Modelling, Measurement and Control B. 77, 3-4, p. 19-35 17 p.

Research output: Contribution to journalArticle

Strain rate effects on the mechanical response of polypropylene-based composites deformed at small strains

Pessey, D., Bahlouli, N., Ahzi, S. & Khaleel, M. A., 1 Jun 2008, In : Polymer Science - Series A. 50, 6, p. 690-697 8 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Thermoforming process of semicrystalline polymeric sheets: Modeling and finite element simulations

Makradi, A., Ahzi, S., Belouettar, S. & Ruch, D., May 2008, In : Polymer Science - Series A. 50, 5, p. 550-557 8 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes

Li, D. S., Garmestani, H., Chu, A. O., Ahzi, H., Alapati, G., Khatonabadi, M., Es-Said, O., Siniawski, M. T., Matrisciano, L. & Ahzi, S., May 2008, In : Polymer Science - Series A. 50, 5, p. 533-537 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2007

A simple hardening rule accounting for time-dependent behavior in Al-Mg-Si alloys

Correia, J. P. M., Simões, F., Gracio, J. J., Barlat, F. & Ahzi, S., 15 May 2007, In : Materials Science and Engineering A. 456, 1-2, p. 170-179 10 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Composite modeling for the effective elastic properties of semicrystalline polymers

Ahzi, S., Bahlouli, N., Makradi, A. & Belouettar, S., Jan 2007, In : Journal of Mechanics of Materials and Structures. 2, 1, p. 1-22 22 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates

Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C. & Makradi, A., 1 Dec 2007, In : International Journal of Solids and Structures. 44, 24, p. 7938-7954 17 p.

Research output: Contribution to journalArticle

142 Citations (Scopus)