• 5795 Citations
  • 37 h-Index
1987 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

Filter
Article
2019
7 Citations (Scopus)

Adsorption of phosphate on iron oxide doped halloysite nanotubes

Almasri, D. A., Saleh, N. B., Atieh, M., McKay, G. & Ahzi, S., 1 Dec 2019, In : Scientific reports. 9, 1, 3232.

Research output: Contribution to journalArticle

Nanotubes
Adsorption
Phosphates
Static Electricity
Anions
1 Citation (Scopus)

An adaptive modelling technique for parameters extraction of photovoltaic devices under varying sunlight and temperature conditions

Aly, S. P., Ahzi, S. & Barth, N., 15 Feb 2019, In : Applied Energy. 236, p. 728-742 15 p.

Research output: Contribution to journalArticle

Parameter extraction
Electric potential
modeling
methodology
temperature
2 Citations (Scopus)

A thermodynamic analysis of Argon's yield stress model: Extended influence of strain rate and temperature

Bernard, C. A., Correia, J. P. M. & Ahzi, S., 1 Mar 2019, In : Mechanics of Materials. 130, p. 20-28 9 p.

Research output: Contribution to journalArticle

Argon
strain rate
Yield stress
Strain rate
argon

Constitutive modeling of the tensile behavior of recycled polypropylene-based composites

Wang, K., Peng, Y., Boumbimba, R. M., Bahlouli, N., Pessey, D., Ahzi, S., Addiego, F. & Rémond, Y., 1 Aug 2019, In : Materials. 12, 15, 2419.

Research output: Contribution to journalArticle

Open Access
Polypropylenes
Composite materials
Constitutive models
Recycling
Elastic moduli

Effect of physical and environmental factors on the performance of a photovoltaic panel

Aly, S. P., Ahzi, S. & Barth, N., 15 Sep 2019, In : Solar Energy Materials and Solar Cells. 200, 109948.

Research output: Contribution to journalArticle

Specific heat
Silicon
Contact resistance
Mountings
Sun

Flexure behaviors of ABS-based composites containing carbon and Kevlar fibers by material extrusion 3D printing

Wang, K., Li, S., Rao, Y., Wu, Y., Peng, Y., Yao, S., Zhang, H. & Ahzi, S., 1 Nov 2019, In : Polymers. 11, 11, 1878.

Research output: Contribution to journalArticle

Open Access
Extrusion
Printing
Carbon
Fibers
Composite materials
17 Citations (Scopus)

N-, P-, As-triphenylene-graphdiyne: Strong and stable 2D semiconductors with outstanding capacities as anodes for Li-ion batteries

Mortazavi, B., Shahrokhi, M., Madjet, M., Makaremi, M., Ahzi, S. & Rabczuk, T., 1 Jan 2019, In : Carbon. 141, p. 291-303 13 p.

Research output: Contribution to journalArticle

Nanosheets
Anodes
Semiconductor materials
Monolayers
Thermodynamic stability
8 Citations (Scopus)

Nanoporous graphene: A 2D semiconductor with anisotropic mechanical, optical and thermal conduction properties

Mortazavi, B., Madjet, M., Shahrokhi, M., Ahzi, S., Zhuang, X. & Rabczuk, T., 1 Jun 2019, In : Carbon. 147, p. 377-384 8 p.

Research output: Contribution to journalArticle

Graphite
Graphene
Semiconductor materials
Thermal conductivity
Nanoelectronics
5 Citations (Scopus)

Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication

Peng, Y., Wu, Y., Wang, K., Gao, G. & Ahzi, S., 1 Jan 2019, In : Composite Structures. 207, p. 232-239 8 p.

Research output: Contribution to journalArticle

Nylons
Polyamides
Carbon fibers
Reinforcement
Fabrication
1 Citation (Scopus)
Phase change materials
Exergy
Energy storage
Ammonia
Thermodynamics
2018
4 Citations (Scopus)
Thermal Model
Finite Difference Scheme
Implicit Method
Finite Difference
Module

Analytical solution to governing equations of triple coupled physics of structural mechanics, diffusion, and heat transfer

Mahdavi, E., Haghighi-Yazdi, M., Baniassadi, M., Tehrani, M., Ahzi, S. & Jamali, J., 1 Sep 2018, In : Scientia Iranica. 25, 5B, p. 2738-2757 20 p.

Research output: Contribution to journalArticle

Mechanics
Physics
Pipe
Heat transfer
Fluids
4 Citations (Scopus)
adjoint method
Solute transport
solute transport
Porous materials
porous medium
5 Citations (Scopus)

Asymmetric rolling of interstitial free steel sheets: Microstructural evolution and mechanical properties

Tamimi, S., Gracio, J. J., Lopes, A. B., Ahzi, S. & Barlat, F., 1 Jan 2018, In : Journal of Manufacturing Processes. 31, p. 583-592 10 p.

Research output: Contribution to journalArticle

Microstructural evolution
Steel sheet
Textures
Mechanical properties
Shear deformation
3 Citations (Scopus)

Cooperative-VBO model for polymer/graphene nanocomposites

Acar, A., Colak, O., Correia, J. P. M. & Ahzi, S., 1 Oct 2018, In : Mechanics of Materials. 125, p. 1-13 13 p.

Research output: Contribution to journalArticle

Graphite
Graphene
Nanocomposites
nanocomposites
graphene
8 Citations (Scopus)

Dominant environmental parameters for dust deposition and resuspension in desert climates

Figgis, B., Guo, B., Javed, W., Ahzi, S. & Rémond, Y., 3 Jul 2018, In : Aerosol Science and Technology. 52, 7, p. 788-798 11 p.

Research output: Contribution to journalArticle

resuspension
Dust
dust
dry deposition
Particulate Matter

Effects of short-term mechanical loads on the cracking of glass tubes in a 500-m-deep rock formation

Barth, N., Rémond, Y., Bumbieler, F., Buscail, F., Schwartz, A., Ahzi, S. & George, D., 1 Mar 2018, In : Journal of Geotechnical and Geoenvironmental Engineering. 144, 3, 04018002.

Research output: Contribution to journalArticle

repository
host rock
glass
Rocks
Glass
22 Citations (Scopus)

High performance hydroxyiron modified montmorillonite nanoclay adsorbent for arsenite removal

Almasri, D. A., Rhadfi, T., Atieh, M., McKay, G. & Ahzi, S., 1 Mar 2018, In : Chemical Engineering Journal. 335, p. 1-12 12 p.

Research output: Contribution to journalArticle

Bentonite
arsenite
Clay minerals
montmorillonite
Adsorbents
16 Citations (Scopus)

Investigation of factors affecting condensation on soiled PV modules

Figgis, B., Nouviaire, A., Wubulikasimu, Y., Javed, W., Guo, B., Ait-Mokhtar, A., Belarbi, R., Ahzi, S., Rémond, Y. & Ennaoui, A., 1 Jan 2018, In : Solar Energy. 159, p. 488-500 13 p.

Research output: Contribution to journalArticle

Condensation
Dust
Atmospheric humidity
Ion chromatography
Glass
1 Citation (Scopus)
Irradiance
Physics
Modeling
Conversion efficiency
Simulation
4 Citations (Scopus)

Multiscale description and prediction of the thermomechanical behavior of multilayered plasticized PVC under a wide range of strain rate

Bernard, C. A., Bahlouli, N., Wagner-Kocher, C., Lin, J., Ahzi, S. & Rémond, Y., 27 Jun 2018, (Accepted/In press) In : Journal of Materials Science. p. 1-16 16 p.

Research output: Contribution to journalArticle

Polyvinyl Chloride
Polyvinyl chlorides
Strain rate
Temperature
Vinyl Chloride
4 Citations (Scopus)

Using energy balance method to study the thermal behavior of PV panels under time-varying field conditions

Aly, S. P., Ahzi, S., Barth, N. & Abdallah, A., 1 Nov 2018, In : Energy Conversion and Management. 175, p. 246-262 17 p.

Research output: Contribution to journalArticle

Energy balance
Hot Temperature
Boundary conditions
Temperature
Materials properties
2017
2 Citations (Scopus)

A composite approach for modeling deformation behaviors of thermoplastic polyurethane considering soft-hard domains transformation

Mossi Idrissa, A. K., Wang, K., Ahzi, S., Patlazhan, S. & Rémond, Y., 18 Aug 2017, (Accepted/In press) In : International Journal of Material Forming. p. 1-8 8 p.

Research output: Contribution to journalArticle

Polyurethanes
Constitutive models
Elastomers
Thermoplastics
Composite materials
Hardening
Crystalline materials
Metals
Austenitic steel
Magnesium alloys
9 Citations (Scopus)
Oils
Membranes
Water
Nanorods
Chemical cleaning
9 Citations (Scopus)

Finite element simulations of temperature distribution and of densification of a titanium powder during metal laser sintering

Dong, L., Correia, J. P. M., Barth, N. & Ahzi, S., 1 Jan 2017, In : Additive Manufacturing. 13, p. 37-48 12 p.

Research output: Contribution to journalArticle

Powder metals
Titanium
Densification
Powders
Temperature distribution
39 Citations (Scopus)

Flat borophene films as anode materials for Mg, Na or Li-ion batteries with ultra high capacities: A first-principles study

Mortazavi, B., Rahaman, O., Ahzi, S. & Rabczuk, T., 1 Sep 2017, In : Applied Materials Today. 8, p. 60-67 8 p.

Research output: Contribution to journalArticle

Adatoms
Anodes
Ions
Atoms
Boron
7 Citations (Scopus)

Multi-physics modeling and simulation of heat and electrical yield generation in photovoltaics

Sahli, M., Correia, J. P. M., Ahzi, S. & Touchal, S., 1 Jan 2017, (Accepted/In press) In : Solar Energy Materials and Solar Cells.

Research output: Contribution to journalArticle

Physics
Photovoltaic cells
Solar energy
Hot Temperature
Temperature
10 Citations (Scopus)
Irradiation
Heat transfer
Heat generation
Glass
Heat transfer coefficients
2016
28 Citations (Scopus)

A computational analysis of coupled thermal and electrical behavior of PV panels

Sánchez Barroso, J. C., Barth, N., Correia, J. P. M., Ahzi, S. & Khaleel, M. A., 1 Apr 2016, In : Solar Energy Materials and Solar Cells. 148, p. 73-86 14 p.

Research output: Contribution to journalArticle

Temperature distribution
Computer simulation
Solar radiation
Particle swarm optimization (PSO)
Hot Temperature
6 Citations (Scopus)

Effect of straining graphene on nanopore creation using Si cluster bombardment: A reactive atomistic investigation

Berdiyorov, G., Mortazavi, B., Ahzi, S., Peeters, F. M. & Khraisheh, M., 14 Dec 2016, In : Journal of Applied Physics. 120, 22, 225108.

Research output: Contribution to journalArticle

bombardment
graphene
water treatment
field theory (physics)
flexibility
10 Citations (Scopus)

Elastic and yield behaviors of recycled polypropylene-based composites: Experimental and modeling study

Wang, K., Bahlouli, N., Addiego, F. & Ahzi, S., 15 Aug 2016, In : Composites Part B: Engineering. 99, p. 132-153 22 p.

Research output: Contribution to journalArticle

Polypropylenes
Strain rate
Fillers
Composite materials
Elastic moduli
3 Citations (Scopus)

Numerical implementation of an elastic-viscoplastic constitutive model to simulate the mechanical behaviour of amorphous polymers

Bernard, C. A., Correia, J. P. M., Ahzi, S. & Bahlouli, N., 23 Jul 2016, (Accepted/In press) In : International Journal of Material Forming. p. 1-15 15 p.

Research output: Contribution to journalArticle

Constitutive models
Polymers
Strain rate
Subroutines
Elastic deformation
7 Citations (Scopus)

Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: Experiments and modeling of the stress-strain behavior

Boumbimba, R. M., Wang, K., Hablot, E., Bahlouli, N., Ahzi, S. & Avérous, L., 2016, (Accepted/In press) In : Polymer Engineering and Science.

Research output: Contribution to journalArticle

Nylons
Polyamides
Fatty acids
Cellulose
Dimers
2015
12 Citations (Scopus)

Assessing the three-dimensional collagen network in soft tissues using contrast agents and high resolution micro-CT: Application to porcine iliac veins

Nierenberger, M., Rémond, Y., Ahzi, S. & Choquet, P., 1 Jul 2015, In : Comptes Rendus - Biologies. 338, 7, p. 425-433 9 p.

Research output: Contribution to journalArticle

Iliac Vein
micro-computed tomography
Contrast Media
collagen
Swine
4 Citations (Scopus)
Multiphoton Microscopy
Collagen
Mechanical testing
Blood Vessels
Microscopy
1 Citation (Scopus)

Extraction of polymer stress-strain behavior in the presence of self-heating by the use of a simple model for the elastic-plastic deformation

Bernard, C. A., Fond, C., Ahzi, S. & Bahlouli, N., 1 Nov 2015, In : Polymer Engineering and Science. 55, 11, p. 2474-2481 8 p.

Research output: Contribution to journalArticle

Elastic deformation
Strain rate
Plastic deformation
Polymers
Friction
35 Citations (Scopus)

PV panel single and double diode models: Optimization of the parameters and temperature dependence

Barth, N., Jovanovic, R., Ahzi, S. & Khaleel, M. A., 30 Apr 2015, (Accepted/In press) In : Solar Energy Materials and Solar Cells.

Research output: Contribution to journalArticle

Photovoltaic cells
Current voltage characteristics
Diodes
Evolutionary algorithms
Temperature

Sensibilité à la vitesse des composites particulaires à base de polypropylène

Bahlouli, N., Wang, K., Matadi, R., Addiego, F. & Ahzi, S., 1 Jan 2015, In : Revue des Composites et des Materiaux Avances. 25, 2, p. 131-144 14 p.

Research output: Contribution to journalArticle

2014
9 Citations (Scopus)

Analysis of shear deformation by slip and twinning in low and high/medium stacking fault energy fcc metals using the ∅-model

M'Guil, S., Wen, W., Ahzi, S., Gracio, J. J. & Davies, R. W., 2014, In : International Journal of Plasticity. 68, p. 132-149 18 p., 1781.

Research output: Contribution to journalArticle

Twinning
Stacking faults
Shear deformation
Textures
Metals
26 Citations (Scopus)

An interfacial debonding-induced damage model for graphite nanoplatelet polymer composites

Safaei, M., Sheidaei, A., Baniassadi, M., Ahzi, S., Mosavi Mashhadi, M. & Pourboghrat, F., 2014, In : Computational Materials Science. 96, PA, p. 191-199 9 p.

Research output: Contribution to journalArticle

Polymer Composites
Debonding
Graphite
Nanocomposites
nanocomposites
7 Citations (Scopus)

An optimum approximation of n-point correlation functions of random heterogeneous material systems

Baniassadi, M., Safdari, M., Garmestani, H., Ahzi, S., Geubelle, P. H. & Remond, Y., 21 Feb 2014, In : Journal of Chemical Physics. 140, 7, 074905.

Research output: Contribution to journalArticle

approximation
set theory
formulations
composite materials
Set theory
16 Citations (Scopus)

Asymmetric rolling of thin AA-5182 sheets: Modelling and experiments

Tamimi, S., Correia, J. P., Lopes, A. B., Ahzi, S., Barlat, F. & Gracio, J. J., 6 May 2014, In : Materials Science and Engineering A. 603, p. 150-159 10 p.

Research output: Contribution to journalArticle

Textures
textures
Experiments
shear
Anisotropy
29 Citations (Scopus)

Impact response of recycled polypropylene-based composites under a wide range of temperature: Effect of filler content and recycling

Wang, K., Addiego, F., Bahlouli, N., Ahzi, S., Rémond, Y. & Toniazzo, V., 1 May 2014, In : Composites Science and Technology. 95, p. 89-99 11 p.

Research output: Contribution to journalArticle

Polypropylenes
Thermal effects
Talc
Fillers
Recycling
20 Citations (Scopus)

Modeling of deformation behavior and texture evolution in magnesium alloy using the intermediate φ-model

Li, D. S., Ahzi, S., M'Guil, S., Wen, W., Lavender, C. & Khaleel, M. A., 1 Jan 2014, In : International Journal of Plasticity. 52, p. 77-94 18 p.

Research output: Contribution to journalArticle

Twinning
Magnesium alloys
Textures
Polycrystals
Elasticity
9 Citations (Scopus)

Rate mechanism and dislocation generation in high density polyethylene and other semicrystalline polymers

Spieckermann, F., Wilhelm, H., Polt, G., Ahzi, S. & Zehetbauer, M., 10 Mar 2014, In : Polymer (United Kingdom). 55, 5, p. 1217-1222 6 p.

Research output: Contribution to journalArticle

Polyethylene
High density polyethylenes
Polymers
Yield stress
Polypropylenes
8 Citations (Scopus)

Simulation of cooling and solidification of three-dimensional bulk borosilicate glass: Effect of structural relaxations

Barth, N., George, D., Ahzi, S., Rémond, Y., Joulaee, N., Khaleel, M. A. & Bouyer, F., 1 Feb 2014, In : Mechanics of Time-Dependent Materials. 18, 1, p. 81-96 16 p.

Research output: Contribution to journalArticle

Structural relaxation
Borosilicate glass
Solidification
Cooling
Glass
2013
9 Citations (Scopus)

A new multiscale model for the mechanical behavior of vein walls

Nierenberger, M., Rémond, Y. & Ahzi, S., Jul 2013, In : Journal of the Mechanical Behavior of Biomedical Materials. 23, p. 32-43 12 p.

Research output: Contribution to journalArticle

Collagen
Fibers
Anisotropy
Tissue
56 Citations (Scopus)
Friction stir welding
Magnesium alloys
Hydrodynamics
Microstructure
Automotive industry