• 5927 Citations
  • 38 h-Index
1987 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2019

Air-conditioner on-off optimization control XNder variant ambient condition

Al-Azba, M., Cen, Z. & Ahzi, S., 29 Apr 2019, Proceedings of 2018 6th International Renewable and Sustainable Energy Conference, IRSEC 2018. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 8703001. (Proceedings of 2018 6th International Renewable and Sustainable Energy Conference, IRSEC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

A Three-Dimensional Finite Element Based Dynamic Thermal Model of PV Modules with an Improved Thermal Network

Aly, S. P., Barth, N. & Ahzi, S., 28 Sep 2018, Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017. Zaz, Y. & Essaaidi, M. (eds.). Institute of Electrical and Electronics Engineers Inc., 8477421

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Modeling of the Influence of Dust Soiling on Photovoltaic Panels for Desert Applications the Example of the Solar Test Facility at Doha, Qatar

Barth, N., Figgis, B., Abdallah, A., Aly, S. P. & Ahzi, S., 28 Sep 2018, Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017. Zaz, Y. & Essaaidi, M. (eds.). Institute of Electrical and Electronics Engineers Inc., 8477249

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

New Developments in the Modeling and Simulations of the Thermal Behavior and Electrical Yield of Photovoltaics Panels with the Consideration of Desert Environmental Conditions

Ahzi, S., Aly, S. P. & Barth, N., 28 Sep 2018, Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017. Zaz, Y. & Essaaidi, M. (eds.). Institute of Electrical and Electronics Engineers Inc., 8477380

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermomechanical Investigation of PV Panels Behaviour under NOCT Conditions

Sahli, M., De Magalhaes Correia, J. P., Ahzi, S. & Touchal, S., 28 Sep 2018, Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017. Zaz, Y. & Essaaidi, M. (eds.). Institute of Electrical and Electronics Engineers Inc., 8477292

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Time-of-day and Exposure Influences on PV Soiling

Figgis, B., Guo, B., Javed, W., Ilse, K., Ahzi, S. & Remond, Y., 28 Sep 2018, Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017. Zaz, Y. & Essaaidi, M. (eds.). Institute of Electrical and Electronics Engineers Inc., 8477575

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2017

Field-scale Computational Fluid Dynamics applied to wind velocity profiles of photovoltaic plant: Case of the QEERI solar test facility, Doha, Qatar

Barth, N., Figgis, B., Ennaoui, A. & Ahzi, S., 18 Jul 2017, Proceedings of 2016 International Renewable and Sustainable Energy Conference, IRSEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 613-618 6 p. 7983924

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Mitigating the effect of heat and dust to enhance solar panels efficiency

Pamir Aly, S., Barth, N., Figgis, B., Essadiqi, E., Faqir, M., Ennaoui, A. & Ahzi, S., 18 Jul 2017, Proceedings of 2016 International Renewable and Sustainable Energy Conference, IRSEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 835-841 7 p. 7983870

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Multi-physics modelling of PV panels: A computational analysis of heat generation

Sahli, M., De Magalhaes Correia, J. P., Ahzi, S. & Touchal, S., 18 Jul 2017, Proceedings of 2016 International Renewable and Sustainable Energy Conference, IRSEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 136-141 6 p. 7983990

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Numerical simulation of photovoltaic panel thermal condition under wind convection

Assila, H., Essadiqi, E., Faqir, M., Meziane, M., Ghanameh, F. & Ahzi, S., 18 Jul 2017, Proceedings of 2016 International Renewable and Sustainable Energy Conference, IRSEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 653-658 6 p. 7984005

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Review of PV soiling measurement methods

Figgis, B., Ennaoui, A., Ahzi, S. & Remond, Y., 18 Jul 2017, Proceedings of 2016 International Renewable and Sustainable Energy Conference, IRSEC 2016. Institute of Electrical and Electronics Engineers Inc., p. 176-180 5 p. 7984027

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2016

Modeling and numerical simulation of selective laser sintering

Dong, L., Barth, N., Correia, J. P. M. & Ahzi, S., 29 Apr 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2016. Institute of Electrical and Electronics Engineers Inc., 7463376

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Novel dry cleaning machine for photovoltaic and solar panels

Aly, S. P., Gandhidasan, P., Barth, N. & Ahzi, S., 18 Apr 2016, Proceedings of 2015 IEEE International Renewable and Sustainable Energy Conference, IRSEC 2015. Institute of Electrical and Electronics Engineers Inc., 7455112

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Quasistatic to dynamic behavior of particulate composites for different temperatures

Bahlouli, N., Wang, K., Boumbimba, R. M., Wagner-Kocher, C. & Ahzi, S., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 85. p. 81-86 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Towards thermal fatigue modeling of photovoltaic panels under the gulf region harsh atmospheric conditions

Barth, N., Ahzi, S. & Al Otaibi, Z. S., 29 Apr 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2016. Institute of Electrical and Electronics Engineers Inc., 7463375

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2015

Dynamic mechanical characterization and modelling of polypropylene based organoclay nanocomposite

Wang, K., Boumbimba, R. M., Bahlouli, N., Ahzi, S. & Muller, R., 7 Sep 2015, EPJ Web of Conferences. EDP Sciences, Vol. 94. 02025

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impact behaviour of an innovative plasticized poly(vinyl chloride) for the automotive industry

Bernard, C. A., Bahlouli, N., Wagner-Kocher, C., Ahzi, S. & Remond, Y., 7 Sep 2015, EPJ Web of Conferences. EDP Sciences, Vol. 94. 02013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Numerical simulation of large deformations of amorphous polymer with finite element method: Application to normal impact test

Bernard, C. A., Correia, J. P. M., Bahlouli, N. & Ahzi, S., 7 Sep 2015, EPJ Web of Conferences. EDP Sciences, Vol. 94. 04043

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Simulation of solidification, relaxation and long-term behavior of a borosilicate glass

Barth, N., George, D., Ahzi, S., Rémond, Y., Khaleel, M. A. & Bouyer, F., 2015, Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015. John Wiley and Sons Inc., p. 511-519 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Thermal analysis of solar panels

Barth, N., De Magalhães Correia, J. P., Ahzi, S. & Khaleel, M. A., 2015, Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015. John Wiley and Sons Inc., p. 441-450 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)
2014

A PSO algorithm for the calculation of the series and shunt resistances of the PV panel one-diode model

Sánchez Barroso, J. C., Correia, J. P. M., Barth, N., Ahzi, S. & Khaleel, M. A., 12 Mar 2014, Proceedings of 2014 International Renewable and Sustainable Energy Conference, IRSEC 2014. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. 7059883

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)
2013

Electromagnetic sheet bulging: Analysis of process parameters by FE simulations

Correia, J. P. M. & Ahzi, S., 2013, Key Engineering Materials. Vol. 554-557. p. 741-748 8 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Numerical simulation of plug-assisted thermoforming: Application to polystyrene

Bernard, C. A., Correia, J. P. M., Bahlouli, N. & Ahzi, S., 2013, Key Engineering Materials. Vol. 554-557. p. 1602-1610 9 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2012

Microstructure design of UHMWPE-based materials: Blending with graphite nanoplatelets

Delgado, A., Addiego, F., Ahzi, S., Patlazhan, S., Toniazzo, V. & Ruch, D., 2012, IOP Conference Series: Materials Science and Engineering. Vol. 31. 012009

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

On the ability of structural and phenomenological hyperelastic models to predict the mechanical behavior of biological tissues submitted to multiaxial loadings

Nierenberger, M., Rémond, Y. & Ahzi, S., 2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. Vol. 4. p. 267-270 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Rolling texture transition in FCC metals using the viscoplastic φ -model and considering mechanical twinning

Wen, W., M'Guil, S. & Ahzi, S., 2012, Materials Science Forum. Vol. 702-703. p. 241-244 4 p. (Materials Science Forum; vol. 702-703).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Towards building a multiscale mechanical model for the prediction of acute subdural hematomas

Nierenberger, M., George, D., Baumgartner, D., Rémond, Y., Ahzi, S., Wolfram, R., Kahn, J. L. & Rahman, R. A., 2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. Vol. 4. p. 261-266 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2011

Application of the strong contrast technique to thermoelastic characterization of nanocomposites

Baniassadi, M., Ghazavizadeh, A., Ruch, D., Rémond, Y., Ahzi, S. & Garmestani, H., 2011, TMS Annual Meeting. Vol. 2. p. 905-910 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic behavior of virgin and recycled PP/EPR and PP/EPDM/talc materials for car bumpers

Bahlouli, N., Rémond, Y., Wang, K., Matadi, R. & Ahzi, S., 2011, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigation of mechanical properties of silica/epoxy nano-composites by molecular dynamics and finite element modeling

Mortazavi, B., Ahzi, S., Bardon, J., Laachachi, A. & Ruch, D., 2011, TMS Annual Meeting. Vol. 2. p. 117-120 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

Effect of mechanical deformation on electrical percolation of CNT polymer composites

Baniassadi, M., Ghazavizadeh, A., Safdari, M., Garmestani, H. & Ahzi, S., 2010, ASME International Mechanical Engineering Congress and Exposition, Proceedings. PART B ed. American Society of Mechanical Engineers (ASME), Vol. 12. p. 893-897 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical simulation of synthetic microstructured fibrillar adhesive pads

Safdari, M., Baniassadi, M., Ghazavizadeh, A., Ruch, D. & Ahzi, S., 2010, ASME International Mechanical Engineering Congress and Exposition, Proceedings. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 12. p. 173-177 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

Comparison between self-consistent and intermediate approaches for the simulation of large deformation polycrystal viscoplasticity

M'Guil, S., Ahzi, S., Youssef, H., Gracio, J. & Khaleel, M. A., 1 Dec 2007, Materials Science Forum. Vol. 553. p. 81-86 6 p. (Materials Science Forum; vol. 553).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Finite element analysis of temperature and density distributions in selective laser sintering process

Dong, L., Makradi, A., Ahzi, S. & Remond, Y., 2007, Materials Science Forum. Vol. 553. p. 75-80 6 p. (Materials Science Forum; vol. 553).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Citations (Scopus)

Fracture toughness and crack deflection in porous multilayered ceramics: Application to NiO-YSZ

Joulaee, N., Makradi, A., Ahzi, S. & Khaleel, M. A., 1 Dec 2007, Materials Science Forum. Vol. 553. p. 69-74 6 p. (Materials Science Forum; vol. 553).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2006

A physically-based and fully coupled model of elasto-plasticity and damage for dynamic failure in ductile metals

Oussouaddi, O., Campagne, L., Daridon, L. & Ahzi, S., Aug 2006, Journal De Physique. IV : JP. Vol. 134. p. 293-298 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Constitutive modeling of polymer materials at impact loading rates

Richeton, J., Ahzi, S., Makradi, A. & Vecchio, K. S., Aug 2006, Journal De Physique. IV : JP. Vol. 134. p. 103-107 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

High-speed blanking of copper alloy sheets: Material modeling and simulation

Husson, C., Ahzi, S. & Daridon, L., Aug 2006, Journal De Physique. IV : JP. Vol. 134. p. 1189-1194 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Mechanical behavior of composite based polypropylene: Recycling and strain rate effects

Bahlouli, N., Pessey, D., Ahzi, S. & Rémond, Y., Aug 2006, Journal De Physique. IV : JP. Vol. 134. p. 1319-1323 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

18 Citations (Scopus)

On the shear band spacing in stainless steel 304L

Oussouaddi, O., Daridon, L., Chrysochoos, A. & Ahzi, S., Aug 2006, Journal De Physique. IV : JP. Vol. 134. p. 287-291 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2005

An intermediate viscoplastic model for deformation texture evolution in polycrystals

M'Guil, S. & Ahzi, S., 2005, Materials Science Forum. PART 2 ed. Vol. 495-497. p. 989-994 6 p. (Materials Science Forum; vol. 495-497, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)
2004

Numerical characterization of the fracture behavior of solid oxide fuel cell materials by means of modified boundary layer modeling

Nguyen, B. N., Koeppel, B. J., Singh, P., Khaleel, M. A. & Ahzi, S., 2004, Ceramic Engineering and Science Proceedings. Lara-Curzio, E. & Readey, M. J. (eds.). 3 ed. Vol. 25. p. 393-399 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2003

Continuum damage modeling for ductile metals under high strain rate deformation

Husson, C., Ahzi, S., Daridon, L. & Courtin, T., Sep 2003, Journal De Physique. IV : JP. Cirne, J. & Lichtenberger, A. (eds.). Vol. 110. p. 63-68 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Modeling and simulation of dynamic failure in metals

Campagne, L., Daridon, L. & Ahzi, S., Sep 2003, Journal De Physique. IV : JP. Cirne, J. & Lichtenberger, A. (eds.). Vol. 110. p. 147-152 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling of strain rates and temperature effects on the yield behavior of amorphous polymers

Richeton, J., Ahzi, S., Daridon, L. & Rémond, Y., Sep 2003, Journal De Physique. IV : JP. Cirne, J. & Lichtenberger, A. (eds.). Vol. 110. p. 39-44 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

21 Citations (Scopus)
1995

Estimates of the overall elastic properties in semi-crystalline polymers

Ahzi, S., Parks, D. M. & Argon, A. S., 1995, American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Meguid, S. A. (ed.). ASME, Vol. 203. p. 31-40 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

20 Citations (Scopus)

Modeling of crystalline polymers with evolving microstructure: application to peek

Ahzi, S., Lee, B. J. & Asaro, R. J., 1995, American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Meguid, S. A. (ed.). ASME, Vol. 203. p. 15-23 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1990

Modeling of plastic deformation evolution of anisotropy in Semi-Crystalline Polymers

Ahzi, S., Parks, D. M. & Argon, A. S., 1990, American Society of Mechanical Engineers, Materials Division (Publication) MD. Singh, B., Im, Y. T., Haque, I. & Altan, C. (eds.). New York, NY, United States: Publ by ASME, Vol. 20. p. 287-292 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)
1989

Simulation of deformation and texture evolution in semi-crystalline polymers

Ahzi, S., Parks, D. & Argon, A., Sep 1989, American Chemical Society, Polymer Preprints, Division of Polymer Chemistry. 2 ed. Publ by ACS, Vol. 30. p. 55-56 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)